Phosphate

PP1080-J Potassium Phosphate Monobasic, ACS (Potassium Dihydrogen Phosphate), 100gm by AquaPhoenix

• CAS No. 7778-77-0
• KH2PO4 FW=1 36.09

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 100 gram

PH5070-Q Phosphate Buffer Solution, 1L by AquaPhoenix

• APHA for Chlorine, 4500-F, G

Specifications

• Packaging Type: Poly
• Size: 1.00 L

PP1085-K Potassium Phosphate Dibasic, ACS (Dipotassium Hydrogen Phosphate), 500gm by AquaPhoenix

• CAS No. 7758-11-4
• K2HPO4 FW=174.18

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 500 gram

SP1005-J Sodium Phosphate Dibasic, Anhydrous, ACS (Disodium Hydrogen Phosphate), 100gm by AquaPhoenix

• CAS No. 7558-79-4
• Na2HPO4 FW=141.96

Specifications

• Packaging Type: Poly
• Size: 100 gram

Mi412 Phosphate (Low Range) Professional Photometer by Milwaukee

This user-friendly Colorimeters will give you direct readings in mg/L. Phosphates are present in natural waters and at concentrations typically found, do not pose any specific health threats to humans.

However, excessive contamination of water courses from agricultural fertilizer run off or wastewater/effluent discharge can promote excessive algae or plant growth.

Milwaukee offers Mi412 with range 0.00 to 2.50 mg/L.

PH5070-P Phosphate Buffer Solution, 500mL by AquaPhoenix

• APHA for Chlorine, 4500-F, G

Specifications

• Packaging Type: Poly
• Size: 500 mL

PH5095-P Phosphate Buffer Solution, pH 7, 500mL by AquaPhoenix

• APHA for Chlorine, 4500-D

Specifications

• Packaging Type: Poly
• pH Value: 7.0
• Size: 500 mL

MW12 Phosphate (Low Range) Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

SP1005-K Sodium Phosphate Dibasic, Anhydrous, ACS (Disodium Hydrogen Phosphate), 500gm by AquaPhoenix

• CAS No. 7558-79-4
• Na2HPO4 FW=141.96

Specifications

• Packaging Type: Poly
• Size: 500 gram

PP1080-K Potassium Phosphate Monobasic, ACS (Potassium Dihydrogen Phosphate), 500gm by AquaPhoenix

• CAS No. 7778-77-0
• KH2PO4 FW=1 36.09

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 500 gram

PP1085-J Potassium Phosphate Dibasic, ACS (Dipotassium Hydrogen Phosphate), 100gm by AquaPhoenix

• CAS No. 7758-11-4
• K2HPO4 FW=174.18

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 100 gram

PH5095-Q Phosphate Buffer Solution, pH 7, 1L by AquaPhoenix

• APHA for Chlorine, 4500-D

Specifications

• Packaging Type: Poly
• pH Value: 7.0
• Size: 1.00 L

PH5162-P Phosphate Buffer, pH 7.2, 500mL by AquaPhoenix

• APHA for BOD, 5210-B

Specifications

• Packaging Type: Poly
• pH Value: 7.2
• Size: 500 mL

PH5162-Q Phosphate Buffer, pH 7.2, 1L by AquaPhoenix

• APHA for BOD, 5210-B

Specifications

• Packaging Type: Poly
• pH Value: 7.2
• Size: 1.00 L

SP1020-J Sodium Phosphate Monobasic, ACS, 100gm by AquaPhoenix

• CAS No. 10049-21-5
• NaH2PO4-H2O FW = 137.99

Specifications

• Packaging Type: Poly
• Size: 100 gram

SP1020-K Sodium Phosphate Monobasic, ACS, 500gm by AquaPhoenix

• CAS No. 10049-21-5
• NaH2PO4-H2O FW = 137.99

Specifications

• Packaging Type: Poly
• Size: 500 gram

MO1460-B Molybdate Reagent, 60mL by AquaPhoenix

• for Phosphate (PO4)
• Corrosive Liquid NOS/UN1760

Specifications

• Packaging Type: Poly
• Size: 60 mL

MO1460-P Molybdate Reagent, 500mL by AquaPhoenix

• for Phosphate (PO4)
• Corrosive Liquid NOS/UN1760

Specifications

• Packaging Type: Poly
• Size: 500 mL

MO1460-Q Molybdate Reagent, 1L by AquaPhoenix

• for Phosphate (PO4)
• Corrosive Liquid NOS/UN1760

Specifications

• Packaging Type: Poly
• Size: 1.00 L

MW10 Free Chlorine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW11 Total Chlorine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

MW13 Iodine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.