77

AI1132-S 84 μS/cm Conductivity Calibration Solution 4 oz. by Apera

The Apera Instruments 84 μS/cm Conductivity Standard Calibration Solution is made of high-purity chemicals, standardized against NIST certified references at 25°C (77°F). It's ideal for the calibration of all types of conductivity meters. Since conductivity value is affected by temperature, the temperature & conductivity reference table is provided on the bottle labels for your reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 1-year shelf life. The expiration date is printed on the bottle.

MSDS is downloadable at support.aperainst.com; The Certificate of Analysis can be acquired by requests.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• Standardized against NIST certified references at 25°C (77°F), ideal for the calibration of all types of conductivity meters
• Double-sealed, 1-Year shelf life
• The expiration date and Temperature/pH reference table is provided for reference
• Non-hazardous product (MSDS is downloadable)

Part Number: 17L-77-500

Part Number: 221L-77-500

AI1134-S 111.8 mS/cm Conductivity Calibration Solution 4 oz. by Apera

The Apera Instruments 111.8 mS/cm Standard Conductivity Calibration Solution is made of high-purity chemicals, standardized against NIST certified references at 25°C (77°F). It's ideal for the calibration of all types of conductivity meters. Since conductivity value is affected by temperature, the temperature & conductivity reference table is provided on the bottle labels for your reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 1-year shelf life. The expiration date is printed on the bottle.

MSDS is downloadable at support.aperainst.com; The Certificate of Analysis can be acquired by requests.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• Standardized against NIST certified references at 25°C (77°F), ideal for the calibration of all types of conductivity meters
• Double-sealed, 1-Year shelf life
• The expiration date and Temperature/pH reference table is provided for reference
• Non-hazardous product (MSDS is downloadable)

Part Number: 10L-77-500

WD-35801-77 Double-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

77A-J Thermocouple/RTD 2-Wire Transmitter, Type J, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available

Part Number: 34L-77-500

ALG10X-08A Algiz 10X Extended Battery 77 Wh by Handheld

• Extended Battery
• 10600 mAh (78.44 Wh)

WD-05993-77 Cole-Parmer® Threaded In-Line Housing with Guard by Oakton

Simply slip an electrode into this housing and screw it into a tee fitting. Pipe tee connection is 1/2" NPT(M). Includes a VITON O-ring. KYNAR construction provides a superior chemical resistance. Maximum pressure: 150 psi.

Guarded models increase electrode life. KYNAR model is suitable for harsh chemicals. Stainless steel (SS) guard models is ideal for food and high-temperature applications. Housings measures 3-13/16"L x 1" dia.

18527-77 Dual Thermocouple Connector, Mini, Female, Type-K; 5/pk by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

WD-36225-77 1-Zone Temperature Controller; Limit/Alarm, Type K, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

98766-77 Traceable Jumbo Timer with Calibration by Digi-Sense

Jumbo digit clock/timer features a dual LCD panel that tilts for easy viewing. Two channels can be operated and displayed simultaneously - use both channels to count down, or use one channel to count up and the other to count down. Built-in clock displays time of day in 12- or 24-hour format.

Timer recalls previous time set. A 70 dB alarm sounds at the end of the countdown; shuts off at the touch of a button. "TIMES UP" flashes at upper left of display for respective channel. Timer displays time elapsed since the end of a countdown. Place timer on tabletop, or mount on wall using the double-sided taped bracket or screws (both are included).

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Tilt the two-line, jumbo-digit, display for easy viewing
• Program two different activities from 24 hours to 1 second

Includes

Wall-mounting bracket, one AAA battery, and NIST-traceable calibration certificate with data.

Part Number: 103L-77-1000

Part Number: 103L-77-500

Part Number: 10L-77-1000

Part Number: 17L-77-1000

Part Number: 221L-77-1000

Part Number: 34L-77-1000

SCT-108.002.77 SCT- REX Infrared Thermometer with High Temp. -32°C TO 1650°C by ScichemTech

Includes:

• 9V DC Battery
• Case
• Manual

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range : (-32°C to 1650°C)
• Rugged & ergonomic design.
• High DS ratio/spot ratio 50:1
• Adjustable emissivity from 0.1 till 1.0
• Backlight dual display LCD.
• New series for general purposes.
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.