Peristaltic

45MFH1A1SUAA Stenner Classic Series Peristaltic Pump, 3 GPD, 100 PSI, Tube 1 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

PBX-102 2-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

85MJH1A1STAA Stenner Classic Series Peristaltic Pump, 5 GPD, 100 PSI, Tube 1 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

GrowControl™ MDX5 Dosing Panel (penta pump, B size panel) by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

AgrowDose™ AD2 Dual Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

PBX-104 4-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

PERIPODL3 PeriPod L3 1200ml/min per pump by Bluelab

Easy integration for nutrient solution management.

Your time is extremely valuable, don't waste it manually dosing.

Designed to be teamed with the Bluelab® Pro Controller for a fully integrated solution for optimal reservoir dosing, the Bluelab® PeriPod™ is a simple and reliable inclusion.

The Bluelab® PeriPod™ responds to dosing triggers received from the Bluelab® Pro Controller and pumps pH adjusters and nutrient stock solutions into your reservoir using peristaltic pumps. Accurately measure, control and maintain pH levels. Grow sites are all different so now you can choose the size to match your set up needs and add optional extras, external alarm box and sample pot, to your nutrient dosing system set up.

Visit the Bluelab® PeriPod™ pages on bluelab.com to read more about which pump size is suitable for your system.

Features

• 1x 1200ml (40fl oz)/min peristaltic pump for dosing pH adjuster solutions
• 2x 1200ml (40fl oz)/min peristaltic pumps for dosing nutrient stock solutions
• Rugged wall mount design
• Individual pump priming and calibration
• Replaceable peristaltic pumps and tubing
• Compatible with Bluelab® Pro Controller™ and most Bluelab® Dosetronic™ models
• Length: 392 mm / 15.4 in
• Height: 154 mm / 6 in

BPU1K401 Peristaltic Pump 1400ml for IntelliDose by Bluelab

The Bluelab Peristaltic Pump 1400ml was designed with improved pump performance and ease of maintenance in mind

• Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 1400ml per minute
• Requires no tools to replace the squeeze tube
• The spring-loaded roller block design enhances both performance and squeeze tube life

Why Peristaltic Pumps?

• Affordable commercial dosing volume
• Two dose rates (sizes) available - 450ml and 1400ml
• Designed to maximize squeeze tube life
• Provides constant adjustment while the inside of the tube wears
• Adjusting to tolerances and any other deviations that may exist in the tubing
• Integrated brackets keep hoses tidy

BPU45001 Peristaltic Pump 450ml for IntelliDose by Bluelab

The Bluelab Peristaltic Pump 450ml was designed with improved pump performance and ease of maintenance in mind

• Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 450ml per minute
• Requires no tools to replace the squeeze tube
• The spring-loaded roller block design enhances both performance and squeeze tube life

Why Peristaltic Pumps?

• Affordable commercial dosing volume
• Two dose rates (sizes) available - 450ml and 1400ml
• Designed to maximize squeeze tube life
• Provides constant adjustment while the inside of the tube wears
• Adjusting to tolerances and any other deviations that may exist in the tubing
• Integrated brackets keep hoses tidy

85MFH7A1SUAA Stenner Classic Series Peristaltic Pump, 40 GPD, 100 PSI, Tube 7 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

85MJH7A1STAA Stenner Classic Series Peristaltic Pump, 40 GPD, 100 PSI, Tube 7 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

PERIPODM4 PeriPod M4 120ml/min per pump by Bluelab

Easy integration for nutrient solution management.

Your time is extremely valuable, don't waste it manually dosing.

Designed to be teamed with the Bluelab® Pro Controller for a fully integrated solution for optimal reservoir dosing, the Bluelab® PeriPod™ is a simple and reliable inclusion.

The Bluelab® PeriPod™ responds to dosing triggers received from the Bluelab® Pro Controller and pumps pH adjusters and nutrient stock solutions into your reservoir using peristaltic pumps. Accurately measure, control and maintain pH levels.

Grow sites are all different so now you can choose the combination to match your set up needs and add multiple PeriPods.

Connect to M3 or M4 PeriPods will enable multi-dosing up to 12 nutrients or pH adjusters. External alarm box and sample pot available to customize your nutrient dosing system set up.

Visit the Bluelab® PeriPod™ pages on bluelab.com to read more about which pump size is suitable for your system

Features

• 4x 120ml (4fl oz)/min peristaltic pump for dosing pH adjuster solutions or nutrient stock solutions. Selectable with Bluelab Connect Software.
• Rugged wall mount design
• Individual pump priming and calibration
• Replaceable peristaltic pumps and tubing
• Compatible with Bluelab® Pro Controller™ and most Bluelab® Dosetronic™ models
• Length: 288 mm / 11.3"
• Height: 112 mm / 4.4 in

AgrowDose™ AD4 Quad Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

45MJH2A1STAA Stenner Classic Series Peristaltic Pump, 10 GPD, 100 PSI, Tube 2 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

AgrowDose™ AD1 Peristaltic Dosing Pump by Agrowtek

AgrowDose AD1 dosing pump is a rugged and economical singlehead peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi.

AD1 Pump operates at a fixed speed (~50mL/min) when powered and requires a controlled outlet to operate the pump (such as RX1 or RX4.) Includes a standard wall plug power supply.

Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Single dosing pump
• Precision dosing accuracy: Fixed flow rate, non-reversable
• Easy-change pump heads: Twist & replace; no tools required
• Durable powder-coated steel enclosure
• Made in USA
• 1-Year Warranty

Typical Applications

• Agricultural Nutrient or pH Dosing
• Industrial Chemical Dispensing
• Laboratory Dispensing
• Aquarium
• Pool & Spa
• OEM & Custom Applications

AgrowDose™ ADi Digital Persitaltic Dosing Pumps by Agrowtek

AgrowDose™ ADi series "intelligent" dosing pumps are digitally controlled, variable speed capable next-generation pumps for use with Agrowtek's SXH hydroponics sensors as an autonomous pH & EC dosing system. Available in 1, 2, 4, or 5 pump models.

Rugged and economical peristaltic pumps are designed for injecting nutrient solutions, pH buffers and other chemicals into stock tanks or pressurized water lines up to 20psi. Pump heads feature a suction intlet tube and a pressurized outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

ADi pump motors operate independently when connected to intelligent control devices such as Agrowtek's SXH pH/EC hydro sensors or PHX pH sensors, or from a computer using the LX1 USB AgrowLINK for batch dosing.

Quick-change replaceable pump heads offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• 50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water

85MJH2A1STAA Stenner Classic Series Peristaltic Pump, 17 GPD, 100 PSI, Tube 2 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations

PBX-106 6-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

45MFH2A1SUAA Stenner Classic Series Peristaltic Pump, 10 GPD, 100 PSI, Tube 2 by Quantrol

Features

• Advantages of Stenner peristaltic pumps on page 1
• Fast tube replacement without tools with patented QuickPro® pump head
• Adjustable models: External adjustable dial ring on feed rate control; 20:1 turndown, 2.5% increments
• Single head models: Available as Tank Systems: 7.5, 15, 30 gallon; Fixed output pump can be utilized for proportional dosing, refer to pages 54-57
• Components are interchangeable between models
• Tank System ships pre-assembled for quick installations