Explosion

*Please note we can only ship RKI products to customers within the United States

301 Hydrocarbon Duct Mounting Open Path Detector (0.6-3.5 m), Lamp Type by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

5600-3053 GDX-350 Gas Sensor Transmitter/Monitor, [CO2], without Relays and Modbus RTU Interface by Bacharach

Bacharach's new state-of-the-art GDX-350 transmitters, with Smart Sensor technology, provide accurate and continuous detection of toxic, combustible and asphyxiate gases. The full-featured design of the GDX-350 includes a large LCD display, a 4-20 mA interface, programmable alarms, optional relays and a Modbus interface. Exclusive pre-calibrated replacement sensor technology makes occasional maintenance practically effortless. Rugged construction, intrinsic safety capability (in two-wire mode with barrier) and an explosion-proof housing allow the GDX-350 to operate directly in hazardous-rated areas of many industrial environments, delivering reliable, superior-sensing performance to protect human life, equipment and property.

With its large LCD display, the GDX-350 shows gas concentrations, engineering units and bar graphs along with the most recent 30 minutes of trend data. Utilizing the on-board magnetic keypad, users can also navigate through the display to change alarm set points, instrument configurations, or enter into maintenance mode for non-intrusive sensor calibration. For security, menu options also enable the selection of an authorization code to lock critical parameters. Accompanying the LCD display are standard LED alarm indicators that show when low and high alarm conditions are met. An optional relay board is available to provide three 5-amp relays that can be used to drive audible/visual alarms, or activate exhaust fans.

Features & Benefits:

• Pre-calibrated Smart Sensor capability with 'plug-n-play' convenience minimizes maintenance and downtime
• Non-Dispersive Infrared (NDIR), Catalytic Bead and Electrochemical sensor options available
• Can be placed directly in hazardous environments where leaks occur for quick detection and rapid response
• Graphic LCD for real-time monitoring of concentrations
• 4-20 mA, optional Modbus RTU® and wireless interface
• Easily update alarm set points, configurations or maintenance modes using the LCD display
• 30-minute onboard data trend

5601-3049 GDX-350 Gas Sensor Transmitter/Monitor, [NO2] 0-100 ppm, 2.4 GHz by Bacharach

Bacharach's new state-of-the-art GDX-350 transmitters, with Smart Sensor technology, provide accurate and continuous detection of toxic, combustible and asphyxiate gases. The full-featured design of the GDX-350 includes a large LCD display, a 4-20 mA interface, programmable alarms, optional relays and a Modbus interface. Exclusive pre-calibrated replacement sensor technology makes occasional maintenance practically effortless. Rugged construction, intrinsic safety capability (in two-wire mode with barrier) and an explosion-proof housing allow the GDX-350 to operate directly in hazardous-rated areas of many industrial environments, delivering reliable, superior-sensing performance to protect human life, equipment and property.

With its large LCD display, the GDX-350 shows gas concentrations, engineering units and bar graphs along with the most recent 30 minutes of trend data. Utilizing the on-board magnetic keypad, users can also navigate through the display to change alarm set points, instrument configurations, or enter into maintenance mode for non-intrusive sensor calibration. For security, menu options also enable the selection of an authorization code to lock critical parameters. Accompanying the LCD display are standard LED alarm indicators that show when low and high alarm conditions are met. An optional relay board is available to provide three 5-amp relays that can be used to drive audible/visual alarms, or activate exhaust fans.

Features & Benefits:

• Pre-calibrated Smart Sensor capability with 'plug-n-play' convenience minimizes maintenance and downtime
• Non-Dispersive Infrared (NDIR), Catalytic Bead and Electrochemical sensor options available
• Can be placed directly in hazardous environments where leaks occur for quick detection and rapid response
• Graphic LCD for real-time monitoring of concentrations
• 4-20 mA, optional Modbus RTU® and wireless interface
• Easily update alarm set points, configurations or maintenance modes using the LCD display
• 30-minute onboard data trend

65-2495RK Sensor, Hydrogen Sulfide (H2S) 0 - 100 ppm, Non Explosion Proof Direct Connect, No J-Box by RKI Instruments

The RKI Direct Connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and for a variety of toxic gases. The sensors for LEL, H2, Oxygen, H2S, CO2, and Carbon Monoxide are explosion-proof with flame arrestors, and approved for use in hazardous areas (Class 1, Div. 1 Groups B, C, D). An optional non-explosion proof version is available for oxygen, H2S, CO, and CO2 for use in non-hazardous atmospheres.

The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, SO2, PH3, AsH3, and HCN.

The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments.

All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410 controllers.

Features:

• Available gases include; LEL, H2S, CO, & CO2; Toxic sensors include NH3, AsH3, HCN, PH3, and SO2
• Infrared sensor for combustibles and CO2
• Patented water repellent sensor coating
• Explosion proof construction
• Optional stainless steel junction box

Applications:

• Petrochemical plants
• Refineries
• Gas plants
• Offshore drilling platforms
• Water & wastewater treatment plants
• Pulp & paper mills
• Gas, telephone, & electric utilities
• Parking garages
• Manufacturing facilities
• Steel
• Automotive

*Please note we can only ship RKI products to customers within the United States

61-1000RK-05 Sensor, LEL Combustible (Catalytic) with Explosion Proof J-Box (No Transmitter), (Specify Calibration), CSA Version by RKI Instruments

When working on potentially hazardous jobsites, safety managers should look for workplace safety solutions that are dependable and steadfast. When lives are on the line, a workplace cannot afford subpar safety products. That is why, at RKI Instruments, workplace safety is a top priority. Their Research and Development team work daily to integrate the latest technology with the best industry practices. With a reputation for excellent products, RKI Instruments introduces the latest in direct connect sensor technology. Designed for use in Class 1, Division 2 hazardous environments, the Direct Connect Sensors are designed specifically for RKI Beacon 110, 200, and 410 controllers.

Direct Connect Sensors

The RKI Direct Connect Sensors series gas sensors are state of the art gas detection sensors available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and a variety of toxic gases. To use the Direct Connect Sensors, they can be used for remote detection by mounting them onto explosion proof junction boxes, or they can mount directly onto controllers and be used as a completely standalone system. Their unique plugin design allows for a quick and easy tool free installation on jobsites.

Detection solutions for a variety of hazardous environments

The Direct Connect Sensors are designed to be use in both indoor and outdoor settings. Additionally, some of the sensors are available in explosion proof models. The explosion proof models utilize a patented coating which serves double duty as also being water repellant. Users can also purchase splash guards to protect the sensors from very wet conditions.

Sensor Technology

Each sensor is crafted with stainless steel and housed in cast aluminum (stainless steel housing is available for some sensors). The Direct Connect Sensors are available in 2 forms: explosion proof and non-explosion proof. The explosion proof sensors are available as catalytic sensors for LEL, and LEL H2 specific. For hydrogen sulfide and carbon monoxide, the sensors utilize electrochemical technology which provides incredibly specific accuracy and quick response. Oxygen sensors work with galvanic technology, and infrared sensors for methane, hydrocarbons, and carbon dioxide. Non-explosion proof uses a galvanic sensor for oxygen; electrochemical sensors for hydrogen sulfide, carbon monoxide and other toxic gases; and infrared for carbon dioxide. Both explosion proof and non-explosion proof have 1 year warranties for materials and craftsmanship.

Specifications

The response times are under 30 seconds for all gases except hydrogen sulfide and carbon monoxide in the non-explosion versions (with a response time of 35 seconds) and non-explosion proof model sensor for toxic gases which has a 60 second response time. The life expectancy of all sensors are between 2 and 5 years.

The Direct Connect Sensors are compatible with several RKI Industries' accessories including calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors, and dataloggers.

*Please note we can only ship RKI products to customers within the United States

73-0044RK-01 CO-01 Single Gas Personal Monitor, 0-500 PPM with Alkaline and Alligator Clip by RKI Instruments

Certain working environments cannot avoid the potentially unsafe and hazardous conditions. In those situations, it is imperative that employees be equipped with the very best in workplace safety. The types of dangers resulting from hazardous conditions are vast, and the presence of dangerous gases can result in a number of undesirable outcomes such as asphyxia, fire or explosions, spontaneous combustion, and on a smaller scale, damage to the human body or equipment. Using state of the art gas detection technology, RKI Instruments developed the Single Gas Clip-On Personal Monitor to detect nearby atmospheric hazards and alert users in a quick and timely manner.

Single Gas Clip-On Personal Monitor

The Single Gas Clip-On Personal Monitor by RKI Instruments is a top of the line gas detection system that clips easily into place on a belt, pocket, helmet, or shirt. Its sensor detects the presence of four gases (oxygen, carbon monoxide, hydrogen sulfide, and combustible gas) and immediately alerts the user and those nearby. The device is small enough to be highly portable and is available at a very affordable price.

The Single Gas Clip-On Personal Monitor is available in four different models, each of which have been deemed safe for workplace use by CSA to U.S. and Canadian Standards for Class I, Division I, Groups A, B, C, and D atmospheres.

Triple Alarm System

When potentially hazardous atmospheric conditions have been detected, the Single Gas Clip-On Personal Monitor will activate its triple alarm system. The triple alarm is designed to alert the user and everyone within the vicinity. Once the alarm is activated, the backlight will turn on, the LED lights will flash, the audible alert will initiative, and the device will being to vibrate. The triple system is designed to be noticeable during a variety of working conditions when a user may not have full use of senses.

In addition to hazardous atmospheric conditions, the device will alert users when the battery is low, the sensors are malfunctioning, and more.

Specifications

The Single Gas Clip-On Personal Monitor has a response time of 20 seconds for oxygen levels and 30 seconds for carbon monoxide, hydrogen sulfide, and combustible gas. The unit is powered by alkaline dry cell batteries (2 AAA batteries) with a battery life of over 3,000 hours (except model GP-01 which has a battery life of 16 hours). The unit is also equipped with a Peak hold function and STEL & TWA function. Its pocket size dimensions (1.4 W x 4.1 H x 0.8 D) and light weight (3.5 ounces) renders the device highly portable.

Accessories

The Single Gas Clip-On Personal Monitor is compatible with a number of accessories that help to customize the unit to meet a specific workplace's needs. The unit comes standard with rubber protective boots, alkaline batteries, belt clip or alligator clip, and wrist strap. Optional accessories can also be purchased such as a calibration cap, calibration kit, charger unit, and battery pack.

*Please note we can only ship RKI products to customers within the United States

CES-EX-GB-02-100 LED Explosion Proof High Bay, 100W by Global Green

The anti-shock and vibration pattern and tempered glass lampshade design enables the explosion-proof LED high bay lighting to have a higher CRI, reducing glare in applications where users may have direct visual contact with the light source. It can be used for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups Fand G; Class III hazardous environment. The hazardous location high bay light is equipped with corrosion-resistant and high-strength aluminum alloy housing, which is suitable for salt water and corrosive environment. It is very efficient and safe, and multiple installation options, etc., which is very suitable for your project.

Features

• Patent designed to be Curved Fin Shape, maximize the best heat transmit.
• Housing-Aluminum alloy (ADC12).
• LED: LM80 certified, high efficacy, low decay, long lifespan.130Im/W ±5, up to 26000lm.
• Lens-tempered glass (8mm - 10mm) shock & vibration resistant, Super clear, >90% light transmit.
• Meanwell LED Driver, >90% driver efficacy.
• Circuit design: 4KV/6KV Surge Protection power supply.

Application

• Wastewater treatment plants
• Oil and gas refineries
• Petrochemical facilities
• Food and beverage facilities
• Power Plants
• Paper mills
• Shipyards
• Chemical Processing Facility
• Pharmaceutical Plant
• Coal mining plants

2106A BRICKette 21LED Explosion Proof Light with 100' Electric Cable & Non-Hazardous Power Box and Plug Choose Handle by Western Technology

Like it's bigger brother (The BRICK™), The BRICKette™: 2106 LED- packs a level of versatility and durability like no other hand-held LED work light. Because of it's compact size, we have the flexibility to power up to five lights from one power box. The handles are purpose built; providing better ergonomics (it feels good in your hand), and may be used as a stand or a mount. The BRICKette™ is designed to meet the needs in a variety of applications from inspection, aviation construction & maintenance, confined spaces... and so much more. Kick-It Tough™ Explosion Proof Lighting!

Features

• Approved for: Class 1, Div 1 & 2, Groups C & D
• Approved for: Class II, Div 1 & 2; Groups E, F, & G
• Approved for: CSA Zones 1 & 2; Zones 20, 21, & 22
• Conforms to UL Stds 153, 8750, 844
• Certified to CSA Std C22.2#s 12, 25, 30, 137, 250.13
• Suitable for Wet Location Use: Type 6P
• Certified Portable Luminary
• Temperature Rating: T-code: T5
• LED Color: ~6000K, CRI >70
• Rated with optics: 26,000 Lux at 1'
• Rated with optics: >2,500 lumens
• Reflective Optic Beam Angle: 60 degrees
• Light Head Power: 21VDC, 800mA, LVLE
• Weight: 3.5 lbs (light head only) / 4.2- 5.3 lbs (light head with handle)
• Dimensions: 6"L x 2.9"W x 2.3"H
• Polyurethane Bumper Protection

65-2442RK-2K-01 S2 Series Transmitter/J-Box (No Detector), H2 Specific MOS, 0 - 2000 ppm Linearized by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

1198-1 86ASU UV/IR Flame Detector with Self-Test (860) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

CES-EX-GB-02-40 LED Explosion Proof High Bay, 40W by Global Green

The anti-shock and vibration pattern and tempered glass lampshade design enables the explosion-proof LED high bay lighting to have a higher CRI, reducing glare in applications where users may have direct visual contact with the light source. It can be used for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups Fand G; Class III hazardous environment. The hazardous location high bay light is equipped with corrosion-resistant and high-strength aluminum alloy housing, which is suitable for salt water and corrosive environment. It is very efficient and safe, and multiple installation options, etc., which is very suitable for your project.

Features

• Patent designed to be Curved Fin Shape, maximize the best heat transmit.
• Housing-Aluminum alloy (ADC12).
• LED: LM80 certified, high efficacy, low decay, long lifespan.130Im/W ±5, up to 26000lm.
• Lens-tempered glass (8mm - 10mm) shock & vibration resistant, Super clear, >90% light transmit.
• Meanwell LED Driver, >90% driver efficacy.
• Circuit design: 4KV/6KV Surge Protection power supply.

Application

• Wastewater treatment plants
• Oil and gas refineries
• Petrochemical facilities
• Food and beverage facilities
• Power Plants
• Paper mills
• Shipyards
• Chemical Processing Facility
• Pharmaceutical Plant
• Coal mining plants

9610A200 BRICK Explosion Proof Lighthead, 200' Electric Cable Non-Explosion Proof Power Box & Non-Explosion Proof 3118 Plug by Western Technology

The BRICK™: 9610 LED explosion proof mountable area light is the most versatile and rugged portable explosion proof LED light on the market. Built for a variety of applications ranging from Aviation and Ship Building to Power Generation and Refineries. The BRICK™ is the perfect choice for your portable lighting needs. The BRICK™ is approved for hazardous locations. Class I, Div. 1 & 2, Groups C & D; Class II, Div. 1 & 2, Groups E, F, & G; CSA Zones 1 & 2; Zones 201, 21, 22. Kick-It Tough™ Explosion Proof Lighting

Features

• Approved for: Class 1, Div 1 & 2; Groups C & D
• Approved for: Class II, Div 1 & 2; Groups E, F, & G
• Approved for: CSA Zones 1 & 2; Zones, 20, 21, & 22
• Conforms to UL Stds 153, 781, 844;
• Certified to CSA Stds C22.2#s 12, 25, 137
• Suitable for Wet Location Use
• Certified: Portable Luminary (Portable Luminaire)
• Temperature Rating: T-Code: T5 (-20°C to +40°C); T4 (-20°C to +100°C)
• LEDs Color: ~6000K, CRI >70
• Rated with optics: 50,000 Lux at 1'
• Rated with optics: >11,500 lumens
• Reflective Optic Beam Angle: 60°
• Light Head Power: Models A and C: 36VDC, 2-3A
• Weight: 10 lbs (light head only)
• Dimensions: 10"L x 5"W x 4"H
• Protection: Polyurethane Bumper
• Multiple Mounting Options: Flexible Mechanical & Magnetic mounting (See Mounting Options)

90446-91 Probe Type-K 316 Stainless Steel 12" L Aluminum Heads by Digi-Sense

These MgO thermocouple assemblies consist of a single or dual thermocouple element constructed of various sheath materials, assembled together with a connection head.

Features

• Inconel, 316 Stainless steel or 304 Stainless steel sheath materials
• 1/2" X 1/2" NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover, Cast iron screw cover, or Cast iron/aluminum explosion proof class C Heads
• Standard Limits of Error
• Grounded Measuring Junction
• Custom built assemblies available upon request

57-1050RK S-Series Xmtr, 4-20 mA, LEL, S Type, as Sold by RKI Instruments

The RKI "S" Series gas sensor and transmitter is basic gas transmitter for the detection of common gas hazards. The transmitter is an efficient, reliable, and cost-effective safety solution to meet the needs of any industrial application. The transmitters were created specifically for highly volatile environments, and each transmitter is housed in an explosion proof casing. The device is ready for field use and can be adjusted and calibrated easily in the field. With an RKI "S" Series transmitter, users can be certain that they are receiving the very best in gas safety equipment.

RKI "S" Series Explosion Proof Gas Sensor and Transmitter Features

The transmitter is a reliable and durable solution for onsite hazards. True to its reputation, RKI Instruments designed this series with user friendly features to meet growing customer demands. This series features an explosion proof housing, patented water repellant sensor coating, long life sensors (2+ years of typical life), and an intrinsically safe rating. The unit operates independently of a controller and is available for LEL, H2S, CO, O2, and ppm HC monitoring. Infrared sensors are also available for LEL and CO2.

To protect the circuitry, the electronics are enclosed inside a potted package. This helps to reduce wear and tear due to corrosion and abuse. The amplifier is situated inside an aluminum explosion proof enclosure. Additionally, all sensors are explosion proof with flame arrestors. The flame arrestors use a patented water repellant coating. They are approved for use in hazardous atmospheres.

Industrial Applications

The series' basic design and user friendly nature is suitable for a variety of industrial applications, such as

• Petrochemical plants
• Refineries
• Gas plants
• Offshore drilling platforms
• Water and wastewater treatment plants
• Pulp and paper mills
• Gas, electric, and telephone utilities
• Parking garages
• Manufacturing facilities
• Steel industries
• Automotive plants
• Chemical storage buildings

Transmitter Specifications

The transmitters are functional both indoors and outdoors. Each condition provides a different operating range for temperature and humidity. Each transmitter operates on 11 to 30 VDC. Each transmitter also comes standard with a 1 year warranty for materials and workmanship.

RKI Instruments

RKI Instruments is a global leader in gas detection equipment manufacturing. For over 70 years, RKI has sold more than 800,000 portable and fixed gas monitors all over the world. The company strives to grow and develop with the changing technology. Their team of scientists and engineers are constantly researching and assessing the most advanced technology and working to improve their product offerings by successfully integrating this technology into modern safety equipment. At RKI, reliability and efficiency are key features of every new product.

*Please note we can only ship RKI products to customers within the United States

2801-07-001 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), Ethyl acetate (C4H8O2), No Display by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

G999P-03-03-00-00-00-61-10E G999 Multi-gas Atmospheric Monitor Bump Kit, 5 year O2 (lead free), 3 year COSH, IR LEL includes calibration cap, cable, charging cradle, wall power adapter, integrated pump, sample probe & tubing by GfG

The Microtector III G999 combines the demands of a modern multi-gas measurement device for protecting workers with the ability to safely measure confined spaces. As a robust and sophisticated multi-gas detector, it is versatile in its application and flexible in sensor combinations.

Advantages

Safety through quality and functionality

To fit every environment, there are three versions available. All versions include three electrochemical and one infrared sensor. Depending on the version, the G999 features a catalytic combustion (CC) sensor, a combined CC/semiconductor sensor, a PID sensor or a fourth electrochemical sensor. This allows a variety of gas combinations or measuring ranges to be defined and simultaneously monitored.

The well thought-out design of the housing and the menu navigation, allows for easy operation in difficult situations. For example, the display can be easily rotated 180°, so that it is always easy to read. For work in poorly lit rooms or in emergency situations, the G999 features an explosion-proof LED torch.

Designed for difficult working conditions

The Microtector III G999 is certified for use in Ex Zone 0 and is water and dust-proof according to protection class IP 67 and is suitable for challenging applications. The rubberized polycarbonate housing provides excellent protection against jolts and impacts, while the practical design and robust crocodile clip ensure optimum wearing comfort.

Ample Battery Power for Long Operating Times

Unlike other devices, the G999 features a double battery capacity of up to 130 hours of operation and provides power supply to the pump.

Remote Monitoring to Protect Employees

If devices with radio modules are used, teams can be monitored centrally via the portable GfG-Link or using a computer and USB dongle. Information regarding the measured gas concentrations, alarms and the status of the man-down alarm will then be available in real time.

Prepared for an Emergency - Alarm for Exercise

In the event of an alarm, knowing how to behave is highly important. By means of the alarm simulation any gas values can be transmitted to the Microtector III G999 to simulate and train different emergency scenarios.

Maintenance & Documentation – Location-Independent and Legally Compliant

The test and docking stations for the Microtector III G999 not only allow location-independent, daily display tests and regular functional checks, but also the complete documentation.

G888 – The Perfect Match

It is not always necessary to equip every employee with a gas detector including a pump for safe measurement of confined spaces, but everyone should have a modern multi-gas detector. In such situations the Microtector III G888 is recommended. Like the G999, it offers optimum individual protection for all those who have to work in hazardous areas and/or enclosed spaces.

CES-EX-LN-02P-30B Explosion Proof LED Linear Light, 30W by Global Green

With high lumen flux up to 140lm/W, material 6063+ADC12 (spray paint), PC is V-0 Flame retardant, F1- UV-Resistant,excellent anti-corrosion performance for marine, suitable for salt water and corrosive environment. Anti-Glare - micro optics Reduces direct visual contact with the light source. 6J Shock and vibration resistant. Mounting optional and Emergency optional. High quality, competitive price and long lifespan it's really perfect for hazardous location lighting.

Features

• Patent designed for explosion-proof protection performance. Aluminum alloy body, maximize the best heat transmit
• PC cover, excellent anti-corrosion performance shock & vibration resistant, Anti-glare, >90%light transmit.
• Perfect to replace the traditional explosion-proof fluorescent light lamp shape.
• LED: LM80 certified,120-140Im/W, up to 9600 lumen flux.
• High Efficiency LED driver, more than 50000 hours lifespan.
• Circuit design: 4KV/6KV Surge Protection power supply.
• Protection: IP66, high protection grade for waterproof and dust-proof.

Application

• Oil & Gas Exploration
• Loading Docks Platforms
• Oil Refinery
• Petrochemical Plant
• Power Plant
• Pharmaceutical Plant
• Heavy Industrial Storage Facility
• Paper mills
• Wastewater Treatment Plants
• Shipyards

65-2504RK S-Series Oxygen (O2) Sensor (Partial Pressure Type)/Transmitter/J-Box (Non Explosion Proof) by RKI Instruments

The RKI "S" Series gas sensor and transmitter is basic gas transmitter for the detection of common gas hazards. The transmitter is an efficient, reliable, and cost-effective safety solution to meet the needs of any industrial application. The transmitters were created specifically for highly volatile environments, and each transmitter is housed in an explosion proof casing. The device is ready for field use and can be adjusted and calibrated easily in the field. With an RKI "S" Series transmitter, users can be certain that they are receiving the very best in gas safety equipment.

RKI "S" Series Explosion Proof Gas Sensor and Transmitter Features

The transmitter is a reliable and durable solution for onsite hazards. True to its reputation, RKI Instruments designed this series with user friendly features to meet growing customer demands. This series features an explosion proof housing, patented water repellant sensor coating, long life sensors (2+ years of typical life), and an intrinsically safe rating. The unit operates independently of a controller and is available for LEL, H2S, CO, O2, and ppm HC monitoring. Infrared sensors are also available for LEL and CO2.

To protect the circuitry, the electronics are enclosed inside a potted package. This helps to reduce wear and tear due to corrosion and abuse. The amplifier is situated inside an aluminum explosion proof enclosure. Additionally, all sensors are explosion proof with flame arrestors. The flame arrestors use a patented water repellant coating. They are approved for use in hazardous atmospheres.

Industrial Applications

The series' basic design and user friendly nature is suitable for a variety of industrial applications, such as

• Petrochemical plants
• Refineries
• Gas plants
• Offshore drilling platforms
• Water and wastewater treatment plants
• Pulp and paper mills
• Gas, electric, and telephone utilities
• Parking garages
• Manufacturing facilities
• Steel industries
• Automotive plants
• Chemical storage buildings

Transmitter Specifications

The transmitters are functional both indoors and outdoors. Each condition provides a different operating range for temperature and humidity. Each transmitter operates on 11 to 30 VDC. Each transmitter also comes standard with a 1 year warranty for materials and workmanship.

RKI Instruments

RKI Instruments is a global leader in gas detection equipment manufacturing. For over 70 years, RKI has sold more than 800,000 portable and fixed gas monitors all over the world. The company strives to grow and develop with the changing technology. Their team of scientists and engineers are constantly researching and assessing the most advanced technology and working to improve their product offerings by successfully integrating this technology into modern safety equipment. At RKI, reliability and efficiency are key features of every new product.

*Please note we can only ship RKI products to customers within the United States

CES-EX-LN-02P-40D Explosion Proof LED Linear Light, 40W by Global Green

With high lumen flux up to 140lm/W, material 6063+ADC12 (spray paint), PC is V-0 Flame retardant, F1- UV-Resistant,excellent anti-corrosion performance for marine, suitable for salt water and corrosive environment. Anti-Glare - micro optics Reduces direct visual contact with the light source. 6J Shock and vibration resistant. Mounting optional and Emergency optional. High quality, competitive price and long lifespan it's really perfect for hazardous location lighting.

Features

• Patent designed for explosion-proof protection performance. Aluminum alloy body, maximize the best heat transmit
• PC cover, excellent anti-corrosion performance shock & vibration resistant, Anti-glare, >90%light transmit.
• Perfect to replace the traditional explosion-proof fluorescent light lamp shape.
• LED: LM80 certified,120-140Im/W, up to 9600 lumen flux.
• High Efficiency LED driver, more than 50000 hours lifespan.
• Circuit design: 4KV/6KV Surge Protection power supply.
• Protection: IP66, high protection grade for waterproof and dust-proof.

Application

• Oil & Gas Exploration
• Loading Docks Platforms
• Oil Refinery
• Petrochemical Plant
• Power Plant
• Pharmaceutical Plant
• Heavy Industrial Storage Facility
• Paper mills
• Wastewater Treatment Plants
• Shipyards

66-6992-02-W AirLink 6900 Wireless Explosion Proof Transmitter, VOC (10.6 eV PID) 0-20 ppm, dual battery, 900 MHz radio by RKI Instruments

The RKI AirLink 6900 is a versatile truly wire free transmitter using electrochemical, PID or low-power infrared sensor elements to detect a variety of gases. Wireless, dual battery power (3.6 V Lithium-Thionyl Chloride battery) with 900 MHZ or 2.4 GHz radio options. Magnetic switches allow for non-intrusive calibration as well as full system settings and diagnostics, while in the field.

Features

• Electrochemical, PID, or IR sensors available
• Wireless communication: 900 MHz radio and 52 networks; 2.4 GHz radio and 78 networks
• Dual battery powered
• Battery life: 2-year maximum - electrochemical sensors; 1-year maximum low-power infrared sensors
• Graphical LCD with LED backlight, readable in sunlight
• 3 Push-button interface (ADD, MENU, SUB) with corresponding magnetic, non-intrusive switches
• Explosion/flame-proof certification for select gases
• 1-Year warranty
• Optional remote-mount sensor kit with enclosure

Industry Applications

• Petrochemical plants, refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Chemical plants
• Construction
• Temporary or permanent applications

*Please note we can only ship RKI products to customers within the United States

EC22-701-DM EC 22 Fixed Transmitter with Oxygen (O₂) Sensor, 0 - 25% vol. Range, Display / Modbus by GfG

The EC 22 Series are innovative and cost-effective transmitters for the detection of toxic gases or oxygen levels, but without the need for explosion protection.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the EC 22 by means of a Modbus interface. Due to the different types of signal transmission, a transmitter from the 22 series can be connected to almost any gas detecting system, also as a supplementary or replacement transmitter on existing systems.

Signal processing

The embedded software of the EC 22 linearizes the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. In addition, the transmitter also offers the option of transmitting service, maintenance, and error messages to a connected gas measuring computer.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display and horn

The clear graphic display of the EC 22 is self explanatory and allows you to read the current status and other important information with ease. The display enables you to navigate effortlessly through the unit s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm the display changes color from green to red. Two LEDs indicate the status.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP-54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks

H-D03-0008-000 RAEGuard 2 PID Transmitter Kit, ATEX/IECEx, 1 - 1000 ppm Isobutylene Equivalent by Honeywell Analytics

The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analogue (4-20 mA) three-wire signal output, and RS-485 Modbus digital signal output. It is available in two different models, pumped or diffusion, to best fit your needs.

Calibration has been greatly simplified with the introduction of Electronic Auto-Zero patented by Honeywell.

The RAEGuard 2 PID is utilizing many of Honeywell's PID patents such as the Electronic Auto-Zero that guarantees an incomparable base line stability making it the best in class product.

Polynomial based calibration provides superior calibration linearity throughout the full range.

The RAEGuard 2 PID has a graphic display and LED light status indicator for fault and alarm conditions. In addition, low, high, and fault relays1 can be configured to trigger external alarms or process controls.

A magnetic key interface enables the detector to be calibrated and operational parameters adjusted with the explosion-proof enclosure in place.

MODEL OPTIONS: PUMPED OR DIFFUSION

• Pumped is used for sticky gas
• Diffusion is used for high humidity ambients

REDUCED MAINTENANCE COSTS

• Easy to remove sensor module in hazardous locations without use of tools

REDUCED LIFE COSTS

• Unique lamp design makes the product more robust and enables longer life time

AVAILABILITY

• Continuous VOC monitoring in hazardous and non-hazardous locations

PROVIDES FASTER RESPONSE TIMES

• The sample flow-through design powered by an internal diaphragm pump provides faster response times

ACCURATE READINGS

• Guaranteed by humidity compensation even in humid environments

ADVANCED TECHNOLOGY

• Patented pump duty cycle extending the sensor and lamp cleaning interval
• Patented Electronic Zero keeping the zero point stable
• Patented 3D sensor technology lower quenching effect - faster response to high concentration - lower RH response

SUITABLE FOR A WIDE RANGE OF APPLICATIONS

• Over 200 correction factors are pre-programmed and allow users to display readings of specific target gas

KEY APPLICATIONS AND THEIR VOCS

• Benzene in refinery analyser shelters
• Ammonia in industry
• Vinyl Chloride in chemical manufacturing
• Toluene or Ammonia in semi-conductor plants
• Solvent and chemicals storage
• Phenol and DME in pharmaceutical
• Toluene in printing
• Air quality
• Methyl Ethyl Ketone in paint spray booths
• Heat transfer fluids
• Acetone, Xylene, Phenol in medical, pathology, histology lab

AAA067057 MGT-N Portable Multi Gas Detector, NDIR - O2, CO, H2S, CH4 (4-Gas) by Senko

MGT Multi-Gas Detector is designed to protect workers from the most common industrial hazards, including oxygen deficiency, toxic gas poisoning, and explosions. It continuously measures four key gases O2, CO, H2S, and combustible gas (CH4) displaying their concentrations and raising alarms (visual, audible, and vibrating) when dangerous levels are detected. Equipped with a dual CO/H2S sensor, MGT ensures reliable monitoring to safeguard workers in hazardous environments.

KEY FEATURES

• Small dimension & lightweight
• Rechargeable battery
• 30EA of bump tests / events / cal.
• Simultaneously detect 4 different gases
• 25 hours use by one charge for 4-6 hours (P-Type)
• 60 days use by one charge for 4-5 hours (N-Type)
• Configuration via exclusive IR Link
• Easy check & calibration via Docking Station
• Intrinsic safety