Confined Space Kit

Part Number: QTCKCC

M5-CK-DL GasAlertMicro 5 Series Deluxe Confined Space Kit

The GasAlertMicro5 Series is BW Technologies flagship multi-gas monitor. This kit houses any of the three versions of the GasAlertMicro5 series, including the PID and IR versions and pumped or non-pumped versions.

As a gas monitoring professional you can have peace of mind knowing that you have all of the parts and accessories to properly test your instrument and keep it in good working order. Bump checks and calibration are an essential part of any safety protocol and this kit makes it easy knowing that all of the necessary equipment is in one location. In addition routine maintenance is easier since auxiliary filters and quick connect fittings can be changed when necessary using the spares in the kit. The 1.0 LPM regulator is more versatile than the 0.5 LPM regulator found in other kits since the 1.0 LPM has a greater flow rate for "sticky" gasses such as Chlorine and Nitrogen Dioxide.

In addition the included holster makes it easy to wear your GasAlertMicro 5 on your body. This holster attaches to your belt and holds the instrument display upside down. The advantage of this is that you don't need to remove it from your belt in order to see the readings. When you lift the end of the instrument the display will now be facing you in the correct orientation.

Other parts of the kit include a 10 ft sampling hose for increased sampling range, a sample probe for taking readings from hard to reach areas, calibration cap, and a durable aluminum carry case that houses everything in custom sized foam cut-outs.

Note: Calibration gas not included. Since the GasAlertMicro5 series has so many possible sensor combinations finding the right cylinder(s) can be tricky. Please give us a call at 1-866-455-7832 and we will ensure that we find the correct cylinder for you.

Quattro (diffusion only – no internal pump)

The Quattro confined space kit (CSK) includes:

Part Number: QTXWHMAYNACS

M5PID-00Q0-A-D-0-Y-N-00 GasAlertMicro 5 PID Detector VOCs - Alkaline Batteries by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5PID00Q0AD0YN00

Part Number: GAMAXCKDL

Part Number: M4CKDL

QT-XWHM-R-Y-NA-CS GasAlertQuattro Premium Confined Space Kit with Instrument and Calibration Gas

If do not already own the standard four gas version of the GasAlertQuattro and are also in need of the confined space kit, then this is the best version to order.

Why?

The short answer is that it is easier and faster.

Unlike the Deluxe Confined Space Kit version (QT-CK-DL) which doesn't include the instrument or calibration gas, this version includes both. No need to order a separate monitor and separate calibration gas cylinder. The monitor is the standard CO,H2S,O2,LEL configuration, and the calibration cylinder that comes with it is the CG-Q34-4 which contains 100PPM CO, 25 PPM H2S, 18%/Vol O2, and 50% LEL CH4 (Methane). The reason there are two different confined space kits is that the Deluxe Confined Space Kit (QT-CK-DL) was designed for customers that already own the monitor and need to add the kit as an after market purchase, or customers that are purchasing a configuration other than the standard four gas.

What is included?

• QT-XWHM-R-Y-NA Rechargeable GasAlertQuattro with CO(Carbon Monoxide), H2S(Hydrogen Sulfide), O2(Oxygen), and LEL(Methane) sensors
• CG-Q34-4 Calibration cylinder
• REG-0.5 Regulator - 0.5 Liters per minute flowrate
• Rugged Aluminum Carrying Case
• Wall Charging Adaptor
• Auxiliary Filter Kit
• Calibration cap with 1 foot of tubing
• IR Connectivity Kit with Fleetmanager II software
• Manual Aspirator Kit
• Sampling Probe
• Both Rechargeable and Alkaline battery packs for greater versatility

QT-CK-DL Deluxe Confined Space Kit for the Gas Alert Quattro

This confined space kit contains the following:

• 0.5 LPM Regulator (this is the piece that attaches to the calibration gas cylinder and allows the gas to flow from the cylinder)
• Calibration cap with 1 ft hose (This item is used for calibration and also bump checks. It snaps onto the front of the instrument over the sensor ports)
• Sampling Probe for getting into those hard to reach spaces
• IR Connectivity Kit with Fleet Manager software for downloading datalogging information and changing instrument settings
• Manual Aspirator Kit for taking remote air samples. Operation is fast and easy, simply snap one end on the instrument and drop the tubing into the confined space. Then just squeeze the bulb repeatedly to draw the air sample back to the monitor.
• Custom cut foam insert keeps everything neat and in it's place
• Durable carrying case

Note: Calibration gas must be ordered separately. If your Quattro is the most popular version containing four gases - CO,H2S,O2,LEL then you will need to order part number CG-Q34-4. If your Quattro is a different configuration please see the calibration gas page to find your correct cylinder.

MC-CK-DL Deluxe Confined Space Kit for the GasAlertMicroClip, GasAlertMicroClip XT, and GasAlertMicroClip XL versions

What comes with it?

Inside you will find:

• Regulator (REG-0.5)
• IR connectivity kit with Fleet Manager Software (GA-USB1-IR)
• Carrying strap (GA-ES-1)
• Test cap and hose (MC-TC-1)
• Manual aspirator pump kit with 1 ft probe (MC-AS01)
• Carrying case (MC-CK-CC)
• Auxiliary Filter Kit (MC-AF-K1)
• Leather carrying case (MC2-LC-1)

Max XT (internal pump included)

The Max XT confined space kit (CSK) includes:

Part Number: XTXWHMYNACS

XT-CK-DL GasAlertMax XT II Deluxe Confined Space Kit

Never be unprepared for a confined space entry when you have the GasAlertMax XT II confined space kit. This kit has everything you need to tackle any situation involving confined space gas hazards. It's the smart choice as a valuable add on accessory for your XT-XWHM-Y-NA or other configuration.

Containing every essential accessory, this kit will enable you to perform bump checks and full calibrations in the field or in the office.

The included sampling accessories also enhance your ability to take a remote air sample. For example the sampling probe is a 12 inch long probe that can be used to take a sample from a small area where the monitor itself wouldn't fit. The 10 Foot hose allows you to take a sample from a further distance than the 3ft hose that is included with the instrument

The concussion proof boot is a thick rubber case that fits over the entire instrument. This adds extra protection in case the instrument is dropped or sustains a direct hit from a heavy object.

In the event that you encounter dangerous gas levels, the datalogging software and connectivity kit will enable you to download all of the information to your computer. Once this data is on your computer you can analyze it with the Fleet Manager II software, or export it to Microsoft Excel.

The Deluxe Confined Space Kit is the smart choice for all professionals who want to be prepared for monitoring any confined space.

Contents of the Kit

• Concussion proof boot
• Carrying Holster
• Sampling Probe
• 0.5 LPM Regulator
• Carrying Case
• Laser cut foam insert
• Fleet Manager II software
• IR Connectivity Kit
• 10 foot hose

Note: Calibration gas sold separately. If you need help determining which cylinder is correct for your monitor please call us at 1-866-455-7832.

Part Number: M5CKCC