1030

*Please note we can only ship RKI products to customers within the United States

6300-1030 MGS-150 Gas Transmitter, NH3: 0-100 ppm, Standard Housing by Bacharach

MGS-150 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, and toxic gases. It comes standard with user-selectable analog and digital outputs that can be set for 4-20 mA, 0-5V, 1-5V, 0-10V, or 2-10V; allowing them to connect directly to most BMS, SCADA or control systems. Alarm indicators include an onboard alarm LED and audible buzzer, in addition to an alarm relay for connection to external audible/visual alarms or a BMS system. The product's alarm threshold value is pre-set to factory defaults but is also field programmable. A variety of housing options are available (shown below), from standard IP41 enclosures to IP66 water resistant housings, which allow the MGS-150 Series gas sensors to be placed in the toughest of conditions.

Ideal for Commercial and Industrial Refrigeration, Food Storage and Food Processing Facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.

Features & Benefits:

• Infrared, semiconductor and electrochemical sensor options to meet almost any gas detection need - at the most affordable cost.
• User-selectable analog outputs: 4-20 mA, 0-5V, 0-10V, 1-5V, 2-10V featuring 12/24 VAC/VDC operation.
• Fast-response sensors detect leaks quickly, which protect personnel and minimize refrigerant gas usage and environmental impact.
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustible gases & VOCs.
• Robust design and remote sensor options allow units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount, for placement in the toughest of environments.

GHS1030 Placarding Reference Wall Chart (24" x 36") by GHS Safety

This wall chart has been designed to offer a quick reference to placarding of Hazardous Goods for international shipments. Cross referenced from the U.N. recommendations on the Transportation for Dangerous Goods model regulations. Printed in full color on sturdy semi-rigid plastic, this chart is easily mounted on any wall.

May be used for both indoor and outdoor applications. Available in two sizes.

4035-22 RAM 4035 Carbon Monoxide (CO) Transmitter, 4-20 mA output, 0-500 ppm by GfG

The 4035-22 CO Transmitter is a cost effective method for monitoring Carbon Monoxide in supplied breathing air systems. The transmitter is simple to install and calibrate. With its rugged housing and long life electrochemical sensor the cost of ownership is very reasonable for compressor manufacturers and end users alike.

The 4035-22 transmitter simplifies adjustment of zero and calibration because it is performed at the transmitter. It uses the industry standard 4-20 mA output and can be operated from10-30 VDC, allowing the ultimate in system flexibility.

Carbon monoxide (CO)

Features

• Simple to connect, two wire transmitter
• 10-30 VDC operation
• Industry standard 4-20 mA output
• Easy adjustment of calibration and zero at the transmitter
• Cost effective CO monitoring of supplied breathing air systems
• Robust design and long life electrochemical sensor operation

5201-1030 GDC-150 Gas Sensor Transmitter, NEMA 1 Housing, MOS Combustible Sensor by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

98767-15 Traceable Excursion-Trac™ Thermohygrometer with Barometer and Calibration by Digi-Sense

Easily monitor the environment using the datalogging meters. Memory capacity is 2 years when set to 2-minute intervals, longer when set to larger intervals. Each device has a unique ID allowing multiple units to be used in the same location. Easily transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Simply clear memory after downloading data to USB drive.

Alarm tracking feature stores each alarm event detailing which high or low alarm state occurred, when the alarm state occurred, as well as when the condition returned to normal range. Alarm state indicator includes audio alerts and flashing LCD segments. Other status indicators include low-battery, memory full, and USB data transfer.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Humidity (inside) is for the measuring range for the meter; humidity (outside) is for the probe.

Barometric pressure is measured in mbar (mmHg) only. Measuring range is from 500 to 1030 mbar.

Altitude compensation is in meters only. Measuring range is -100 to 2500 m in 10 m interval.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Store up to 30 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Rolling memory stores 525,600 most recent observations
• Altitude compensation from -100 to 2500 meters
• Set HI/LO alarms for barometric pressure, temperature, and RH

Includes

Built-in stand, hook-and-loop strip, magnetic backing strip, wall-mount receptacle, three AAA batteries, and NIST-traceable calibration certificate with data.

98767-17 Traceable Memory-Loc™ Thermohygrometer with Barometer and Calibration by Digi-Sense

Easily monitor the conditions in manufacturing, labs, and storerooms using the data logging thermohygrometer or barometer. Memory capacity is 2 years when set to 2-minute intervals, longer when set to larger intervals. Each device has a unique ID allowing multiple units to be used in the same location. Easily transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. The data on each unit cannot be overwritten or modified, reliably securing information that should not be deleted.

Alarm tracking feature stores each alarm event detailing which high or low alarm state occurred, when the alarm state occurred, as well as when the condition returned to normal range. Alarm state indicator includes audio alerts and flashing LCD segments. Other status indicators include low-battery, memory full, and USB data transfer.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Humidity (inside) is for the measuring range for the meter; humidity (outside) is for the probe.

Barometric pressure is measured in mbar (mmHg) only. Measuring range is from 500 to 1030 mbar.

Altitude compensation is in meters only. Measuring range is -100 to 2500 m in 10 m interval.

Kea Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Store up to 30 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Adjustable sampling rate - from 1 min to 12 hrs in 1 min steps
• Permanently stores 819,150 barometric pressure, humidity, and temperature readings
• Altitude compensation from -100 to 2500 meters
• Set HI/LO alarms for barometric pressure, temperature, and RH

Includes

Built-in stand, hook-and-loop strip, magnetic backing strip, wall mount, three AAA batteries, and NIST-traceable calibration certificate with data.

68000-49 Traceable® Digital Barometer with Calibration by Digi-Sense

This digital barometer is great for measuring barometric pressure, temperature, and relative humidity in ambient environments. Additionally, the large four-line LCD also displays barometric pressure trends in bar graph format and time of day. Minimum/Maximum readings for all three parameters are automatically stored internally each hour and can be recalled for the past 24 hours. High and low audible and visual alarms may also be set for pressure, temperature, and humidity conditions.

Add the optional data acquisition software and USB cable to permanently capture real-time measurements on your PC from up to eight different barometers. Data can then be saved, viewed, printed as-is, or merged into a report or spreadsheet and e-mailed to any smartphone or computer. The software also features its own 24/7 audible and visual alarm to remind you to check on data.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Unit does not read in psi, but in mbar and in. Hg.

Pressure range provided in psi is for comparison purposes only.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Measure barometric pressure, temperature, and relative humidity with this all-in-one meter
• View current barometric pressure trends in bar graph format for the past 1 to 24 hours
• Easily view Min/Max for all parameters and set high and low alarm set points
• Connect and download real-time readings to a PC with the data acquisition software (optional)
• Range: 500 to 1030 mbar (14.77 to 30.41 inHg)

Includes:

Wall mount, flip-open stand, three AAA batteries, and NIST-traceable calibration certificate with data.

4035-RF RAM 4035 Carbon Monoxide (CO) Transmitter, 4-20 mA output, 0-500 ppm, with increased RF resistance by GfG

The 4035-22 CO Transmitter is a cost effective method for monitoring Carbon Monoxide in supplied breathing air systems. The transmitter is simple to install and calibrate. With its rugged housing and long life electrochemical sensor the cost of ownership is very reasonable for compressor manufacturers and end users alike.

The 4035-22 transmitter simplifies adjustment of zero and calibration because it is performed at the transmitter. It uses the industry standard 4-20 mA output and can be operated from10-30 VDC, allowing the ultimate in system flexibility.

Carbon monoxide (CO)

Features

• Simple to connect, two wire transmitter
• 10-30 VDC operation
• Industry standard 4-20 mA output
• Easy adjustment of calibration and zero at the transmitter
• Cost effective CO monitoring of supplied breathing air systems
• Robust design and long life electrochemical sensor operation