Test and Measurement, Test Products International

753A Refrigerant Leak Detector by Test Products International

The 750a features 400 hour sensor life under normal use; a spare sensor is included with each instrument for a total of 800 hours of continuous use and can detect leaks as small as 0.1 ounces per year (R134a / R22).

Whether testing for leaks in air conditioning, refrigeration, or automotive AC, the versatile 700 series spans the diverse needs of technicians, refrigeration engineers, and maintenance personnel around the globe. From freezer coils to heat pumps, experience fast, reliable results that save you both time and money.

The TPI 750a is a state-of-the-art refrigerant leak detector capable of detecting all halogen based gases. The internal diaphragm pump and unique sensor design provide fast and reliable gas sensing. Selectable sensitivity combined with an adjustable tick rate will allow any service professional to pinpoint those tough to find leaks even in contaminated environments.

Sensor life can be extended by fitting a 1/2" long piece of vinyl tubing onto the sensor tip. This tubing helps prevent foreign material from getting into the sensor during tests; clean or replace the tube regularly.

Even though TPI refrigerant leak detector sensors are very durable and can last up to 400 hours, sensor life can be aided by press fitting a 1/2" long piece of vinyl tubing onto the sensor tip. This tubing helps prevent foreign material from getting into the sensor during tests. Clean or replace the tube regularly.

Features

• Detects all existing refrigerants and blends including 404A, PURON 410A and *R-507 (AZ50)
• 400 hour individual sensor life; a spare sensor is included with each instrument for a total of 800 hours of continuous sensor use.
• Fast response; Begin testing immediately after power on
• 0.1 ounce per year sensitivity
• Pump driven for increased sensitivity with blended refrigerants
• Pinpoint small leaks easily by elimination of background concentration with fully adjustable tic rate
• Visual indicators for power, tic rate and battery replacement
• Optional earphone attachment

Applications

• Check for leaks in refrigeration systems
• Test for leaks in air conditioning systems and cooling units
• Find leaks in automotive air conditioning systems

Standard Accessories

• Sensor: A721
• Instruction Manual: 753a Instruction Manual
• Soft Case with strap (A755)

Optional Accessories

• Earphone A710
• Test vial A713

770 Carbon Monoxide Monitor by Test Products International

The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

The unit features a personal audible and visual alarm, which is factory set at 30ppm CO but can be changed in the field to keep current with government legislation.

Other features include: maximum reading hold, elapsed time and manual zero. The audible alarm may be switched on and off as required. Battery changing is made easy by use of a simple slide off battery compartment cover.

The detector uses an advanced electrochemical sensor that measures Carbon Monoxide and should not be used for any other purpose.

When the audible alarm is switched off a small 'double speaker' symbol will be displayed at the bottom left of the LCD. When the alarm setting is exceeded a 'warning' symbol is displayed at the bottom center of the screen and the red warning indicator is illuminated. As the battery level approaches 2 volts a 'BAT' warning symbol is displayed to indicate low battery level. When the battery level gets too low the unit will automatically switch off.

Features

• Measure CO from O to 999ppm
• Displays the max. CO reading in PPM since power on
• Displays in hours and minutes, time elapsed since power on
• Displays user set value of audible and visual alarm
• The audible alarm can be switched on and off by pressing the SEL button

Applications

• Ambient CO safety checks

775 Combination Carbon Monoxide & Combustion Gas Leak Detector by Test Products International

The combo CO/Combustible gas detector is the first of its kind to combine both detection technologies into one easy to use hand-held andaffordable instrument.

The TPI 775 is a state-of-the-art Carbon Monoxide and Combustible Gas Leak Detector. It is the first of its kind to combine both detection technologies into one easy to use hand-held affordable instrument.

Features

• Easy to use
• One hand operation
• Auto Zero
• Back light
• Visable and audible alarm

Applications

• CO safety measurements in and around combustion sources
• Ambient CO safety checks

Standard Accessories

• Instruction Manual
• Soft Pouch

Optional Accessories

• Earphones

810 Fiber Optic Inspection Tool by Test Products International

Use the 810 to perform non-invasive visual inspections of equipment including heat exchangers.

The 810 is a fiber optic inspection tool used to look in confined or internal constricted areas previously deemed inaccessible. The 810 has a built-in LED light source for illuminating the viewing area and a 45 degree mirror for looking at sides and walls. Is is easy to use and fits comfortably in your hand

Features

• Hi-resolution 8,000 pixel image offers enhanced vision and clarity
• Obedient wand maintains position after adjustment and protects fiber optic bundle
• Sealed tip for use in for noncorrosive liquids
• Optional LED light source to detect UV dye
• Machined aluminum housing is rugged and durable
• Super bright LED flashlight light source provides longer battery life with no bulb replacement necessary
• Coated flexible fiber optic cable for accessibilityto tight areas with bends and curves
• 45° Glass inspection mirror for side viewing
• One-hand focus adjustment
• Compact aluminum carrying case with locking latches
• One year limited warranty

HVAC

• Perform non-invasive inspections of heat exchangers
• Examine heating and cooling ductwork integrity
• Check for blocked evaporator coils in air conditioning equipment
• Inspect boilers without costly disassembly
• Look inside oil burning furnaces for igniter components
• Use to show customers visual evidence of a cracked heat exchanger

Industrial

• Inspect the integrity of weld in pipes and tanks
• Examine gear and bearing surfaces without equipment disassembly
• Perform motor inspection and diagnostics

Home Inspection

• Check the quality of pipes and ducts
• Inspect wire integrity and placement
• Look inside walls and crawl spaces
• View insulation in walls or attics

9000 Inspection by Test Products International

How do you know if things are OK or not? Go and check them is the answer - but obviously you can't do it all by yourself? TPI's new Pocket Inspection system allows absolutely anybody to do it for you by simply answering a list of customizable user defined questions on a rugged handheld PC. The answers are stored and uploaded to the included PC trending software that automatically flags up any warnings or alarms. It will even send out emails to anyone who needs to know!

The handheld Pocket Inspection unit is Extremely rugged (waterproof and droppable) and has a high resolution color display with both touchscreen and keypad entry capability. The software is incredibly easy to use and set up. It comes with a set of "industry standard inspection menus (e.g. fan inspection, pump inspection, etc) that can easily be edited to create new user defined inspection metrics, or simply create your own. "Is the floor clean?", "Are the lights working?" and so on

Consistent verifiable inspections are often the difference between a long life span and early failure. With the optional RFID feature the entire inspection process can be automated. The addition of RFID tags enables instant recognition of individual assets. Customizable menus guide field technicians through a checklist to ensure consistent inspection parameters each and every time. Pocket inspection will also write data back to RIFD tags so the inspection is verified. Data gathered in the ruggedized PDA is automatically downloaded to the correct file when synchronized with the host computer to eliminate data entry errors. Reports can be generated quickly and emailed automatically to managers and technicians so little problems can be dealt with before they become big headaches.

Benefits:

• Easy to use
• Consistently capture the same metrics for every asset
• Optional RFID for route verification
• Value priced
• Ruggedized IP67 case
• Automated report generation

Applications:

• Commercial / Industrial HVAC
• Food Processing
• Manufacturers
• Mining
• Packaging
• Petrochemical
• Printing and Paper Processing
• Utilities

9020 Pro Vibration Meter by Test Products International

The next step in vibration analysis: easy to use low cost Machinery Health Monitoring. Diagnose basic vibration problems: out of balance, misalignment, looseness, and bearing damage.

Benefits:

• Automatically detects out of balance, misalignment, looseness and bearing defects
• Predictive analysis capabilities that accurately calculate time frame to failure
• Condition based monitoring analyzes bearing wear and gear degradation
• Saves and reads measurement values to/from RFID tags with Optional RFID
• Built-in IEPE (constant current) accelerometer power supply
• Rugged fully waterproof construction meets IP67 and MIL-STD-810F requirements.

Applications:

• Commercial / Industrial HVAC
• Food Processing
• Manufacturers
• Mining
• Packaging
• Petrochemical
• Printing and Paper Processing
• Utilities