Test and Measurement, Jenco

3331 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

765PTBF Thermocouple Panel Thermometer, Type PTB, Range -58°F to 1562°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

701JC Temperature Magnetic Back Meter, Type J by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

6230NKC Handheld pH/mV/Temp Microprocessor Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6230N Handheld pH/mV/Temp Microprocessor Meter
• 600P pH electrode
• 6230A-ST Temperature Probe

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6230NKD Accessories Kit for 6230N Meter by Jenco

Includes:

• 6230F Case
• 6230D115 AC Adapter
• Buffers & Bottles

765KF Thermocouple Panel Thermometer, Type K, Range -157°F to 1999°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

6230N Handheld pH/mV/Temp Microprocessor Meter with 3-Point Calibration & RS-232 by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

3101S Conductivity Controller with Analog Output, Adjustable 0-99.9 mS to 0-99.9 uS by Jenco

Conductivity controller with analog output, panel mount, 1/8 DIN aluminum case, K=1.0 cell constant with front panel cell adjust potentiometer and front panel potentiometers for Hi/Lo set points for the Hi and Lo relays. Features bright red LED display and red uS/mS LED indicators. Analog Voltage output is 1 mV/LSD, +/- 0.5%, +/- 1 mV . Power 115/230V AC.

• Wide, selectable range via internal dip switch
• Dual relays
• 0.56 high efficiency red led display
• For cell constant k=1.0
• Analog voltage output
• Auto temp. compensation
• Heat cycled 100 hrs
• Front panel operation
• 50/60 hz noise rejection

pH6810NK VisionPlus pH/mV/Temp. Meter Kit by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

Includes:

• PH6810N: Meter
• 6810NP: PH/Temp/Ref. Electrode
• pH6810F: Soft pouch with pH4, pH7 capsules & bottles

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot

3321 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.