Test and Measurement, ScichemTech

SCT-108.005.11 SCT-pH-MAXI pH Maxi Controller by ScichemTech

Includes:

• pH sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable.(new series).
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate pH value and it give the direct measurement and readings.

SCT-108.005.03 SCT-EC-MINI Conductivity Mini Controller by ScichemTech

Includes:

• Conductivity probe
• Fixation clamps
• Instruction manual

Features:

• SCT EC MINI online Conductivity controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of conductivity measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of conductivity.
• Conductivity electrode is supplied with 5 meter cable.

SCT-108.005.15 SCT-EC-MAXI - HR Conductivity Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration Solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable.(new series). 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS proved to work continuously in any harsh environmental conditions for the inline measurement and control of accurate EC value and it give the direct measurement and readings.

SCT-108.005.02 SCT-ORP-MINI ORP Mini Controller by ScichemTech

Includes:

• ORP probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT ORP MINI online ORP controller is an Industrial online analysis and monitoring instruments
• Simple and Compact design
• Meets all the International Standards
• Easy to Install, Operates safety with less maintenance.
• ORP Electrode Supplied with standard 10 meter cable, Measurement up to 40 meters.
• Large and clear display for easy reading
• Inlin e measurement and control of ORP values

SCT-108.002.40 SCT NASH CO₂ Detector - I by ScichemTech

Includes:

• User Manual
• Sleeve
• Carrying case
• 9V battery

Features:

• A complete portable SCT meter for carbon dioxide measurements.
• Large dual LCD display for co₂, % RH humidity and temperature.
• Precise adjustment in different barometric levels (or pressures).
• Co₂: 0 ~ 9,999 PPM range, diffusion sampling mode.
• Continuous data logging with time/date.
• Energy efficiency by sampling time modulation.
• Data hold & maximum/minimum with time stamp.
• USB power supply.
• Data memory and recall function.
• Easy to use USB interface and user friendly software.
• Fast warm up time/audible alarm.

SCT-108-002-17 SCT KEVIN Portable Suspended Solids Analyzer by ScichemTech

Includes:

• Sensor
• Battery
• Instruction Manual

Features:

• A complete portable SCT meter for suspended solids measurements.
• SCT - Kevin meter designed to measure the suspended solids using optical sensor.
• Meter is optimized for MLSS and RAS data logging and download to spread sheet through RS232 serial port.
• Independent calibration for MLSS and RAS.
• Water proof with IP57 rating and large backlight graphical display.
• Real time SS concentration for process control.
• SCT Kevin meter can also be used to measure sludge blankets in clarifiers memory of safety
• Meter operates with rechargeable batteries and charges for 12 hours.
• Auto shut-off.

SCT-108.003.01 SCT BEN-pH-01 pH Meter with RS232 by ScichemTech

SCT basic benchtop pH/ORP/Temp meter which is suitable for general pH measurement in laboratory consistent with the basic requirements.

Includes:

• Plastic pH combination electrode
• Standard solution pH 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• Operation manual

Features:

• SCT benchtop meter is designed to measure pH, ORP, temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, data storage/ recall, and memory max. and min. value etc.
• 1~3 point automatic calibration and it can automatically display the percentage of slope after finishing calibration
• Equipped with manual temperature compensation
• Option to switch between °C/°F.
• SCT benchtop meter meets ISO9001:2008 & CE standards

SCT-108.002.35 SCT MANS Tachometer (Non-Contact) by ScichemTech

Includes:

• Reflective Tape
• User manual
• Carrying case
• 9V Battery

Features:

• A complete portable SCT meter for rotational speed (rev) measurements.
• Non-contact and contact mode
• Highly reliable and accurate reading
• Non-contact and contact mode
• Laser sighting operating range up to 40 inches/100 cm (laser)
• Auto ranging/fixed decimal
• Tripod mounting bushing
• Contact adaptors
• Battery operated with low battery indication

SCT-108.005.01 SCT-pH-MINI pH Mini Controller by ScichemTech

Includes:

• pH probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT pH MINI online pH controller is an accurate instrument used for Industrial online measurement and pH control
• Simple and compact design
• Meets all the international standards
• Easy to Install , Operates safely with less maintanence
• Output Insulated 4- 20 mA
• Large and Clear LCD Display
• In line measurement and control of pH values
• pH electrode Supplied with standard 10 meter cable

SCT-108.001.01 SCT-PH PEN-1 Handheld pH Meter by ScichemTech

Includes:

• Handheld pH Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy pH measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 0.1 pH resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• Battery operated.

SCT-108.001.02 SCT-PH PEN-2 Handheld pH/Temp Meter with ATC by ScichemTech

Includes:

• Handheld pH/Temp Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy pH measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 0.1 pH resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.03 SCT-CON-PEN-1 Handheld Conductivity Meter with ATC by ScichemTech

Includes:

• Handheld Conductivity Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy Conductivity measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 10 μS/CM resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.04 SCT-CON-PEN-2 Handheld Conductivity Meter with High Resolution by ScichemTech

Includes:

• Handheld Conductivity Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic easy Conductivity measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 1 μS/CM resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With better Conductivity resolution 1 μS/CM.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.05 SCT TDS PEN-1 Handheld TDS Meter with ATC by ScichemTech

Includes:

• Handheld TDS Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy TDS measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 10 ppm resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.06 SCT-TDS-PEN-2 Handheld TDS Meter with High Resolution by ScichemTech

Includes:

• Handheld TDS Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy TDS measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 1 ppm resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With better TDS resolution 1ppm
• With Automatic Temperature Compensation (ATC).
• Battery operated.

SCT-108.001.07 SCT-ORP-PEN-1 Handheld ORP Meter by ScichemTech

Includes:

• Handheld ORP Meter
• Standard Solution
• Battery
• Screw-Driver
• Instruction Manual

Features:

• Reliable SCT Tester for basic & easy ORP measurement.
• Ergonomic Design - Waterproof IP57 rated.
• Accurate & Fast in measurements 1 mV resolution.
• Removable & changeable electrode.
• Large and clear display
• Manual calibration through screw trim port 1 or 2 points.
• With better TDS resolution 1ppm
• Battery operated.