Over $5000

Ultima X 5000 Hydrogen Sulfide by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

BWC2-H-B50 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S) - 50 Unit bulk pack, Low - 10 ppm / High - 15 ppm by BW Technologies

Do you need safe and dependable hydrogen sulfide detection? How about something that is easy for all the workers to use and is very small and weighs just a little over 3 ounces? The alarm default settings are 10 ppm low and 15 ppm high. This gas monitor is small (it can fit into the palm of your hand) but it is very powerful and maintenance free. Because it is portable and high tech, it's all you need for safe and effective H2S detection and monitoring.

To use the BWC2-H just activate it and turn on the machine. There is nothing else to worry about because the battery never needs to be replaced or recharged. This provides trouble-free service without any downtime. The BWC2-H is designed to run for two entire years. However, it can last as long as three years, when put into hibernation.

The Benefits of Bulk Purchases

IntelliDox Technology Compatible

Standard BWC2-H Features

• No sensor changing
• Simple single button operation
• Can handle very harsh work environments, including high humidity and extreme temperatures
• Hibernation mode when used with IntelliDoX
• Battery and sensor tests themselves
• Easy to see wide angle alarm that flashes red. It is also extremely loud at 95 db, and can vibrate
• Autologging 35 most recent bump tests and H2S readings
• Moisture resistant
• Alarm can be set to as sensitive as 1.6 ppm and as high as 20 ppm
• Very affordable and cost effective H2S monitoring

There are many good reasons to own the BWC2-H. It is simple yet effective. You can set the unit to remind you of bump tests and view the time of day, and it is guaranteed for 2 years.

Part Number: BWC2HB50

BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-M-B50

BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5 vol. / High - 23.5 vol., 50 unit bulk pack by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-X-B50

BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm, 50 unit bulk pack by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2-S-B50

MCB3-A3C112E-020 MULTIRAE PRO,CSA.PGM-6248.10.6EV, 2000PPM.LEL.H2S (0.1-100 PPM).CO (0-500 PPM).O2.NON-WIRELESS.LI-ION BAT. W/ ALK. ADP..MONITOR ONLY by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

10061812 Galaxy Automated Test System - Sirius, Standard System + Cylinder Holder by MSA

The Galaxy Automated Test System is a user friendly test system designed with durability and reliability in mind. The high quality polycarbonate plastic encases the test system to ensure the unit will withstand environmental hazards. The Galaxy test system is a time tested unit developed with the highest safety and reliability standards. It is highly compatible with other MSA products and gas detection devices. The unit s advanced functioning technology and optional cost efficient accessories also ensure that they device is highly customizable to individual needs.

User friendly testing

To test a device, users need only to place a device in the unit test stand and close the door. The door will ensure proper gas flow, secures the testing unit into place, and offers dust protection during testing. The Galaxy Automated Test System will automatically begin performing the test. When the unit has finished testing, a bright LED light will provide an instantly recognizable indication of pass or failure. As an added benefit, some MSA devices can even be recharged using the testing system. The Galaxy Automated Test System is compatible with several MSA gas detection products including Solaris, Orion, Sirius, and Altair multigas detectors.

The unit s high functionality ensures that the test system can perform as a standalone device or connected to a computer network. The system also has key features designed to keep the workspace organized. The patent pending gas cylinder holder offers a sturdy base for gas cylinders, and the DIN rail allows for a steady wall mount.

Optional features

Users can also purchase optional features for the Galaxy Automated Test System. In some situations, a power source may not be available. For this reason, an optional battery pack is available that uses replaceable AA alkaline batteries. These batteries can provide up to 100 calibrations for each instrument test stand. Users needing a calibration or data log may want to utilize the optional printer. Users may also want to print a data log to place with the space entry permit. An optional industry-standard memory card is also available which can retain over 1000 test records.

Network interface

The Galaxy Automated Test System is also compatible with an optional network interface. The easy to use interface is great for record retention and retrieval, instrument inventory, adjusting calibration settings, calibration notifications, and managing software. The network interface stores a variety of records including calibration results, calibration due dates, and specific instrument information. A complete list of inventory can be printed and the report can display due dates for all devices along with any pertinent notifications. The Galaxy System network interface also allows users to opt into email notifications. These notifications alert recipients of calibration due dates and test results. Finally, the network interface allows for a network manager. The network manager performs all of the standard functions, but also combines all of the data from the entire network.

The Galaxy Automated Test System has many replacement parts and accessories available from a variety of vendors in North America, Europe, and Australia. The replacement parts are cost-efficient and easily accessible.

44524 Gasurveyor 524 4 Button Portable Gas Detector - PPM, LEL, VOL, H2S by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

3015-8001 PGM-IR Portable Area Gas Monitor - for Carbon Dioxide by Bacharach

The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.

The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
• Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6* gases
• Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
• Cut leak inspection times by 50%
• Instrument comes with battery pack, probe, charger and soft case with shoulder strap
• LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
• Locate leaks within display cases where traditional leak detectors cannot
• Applications include refrigerant gas detection, trace gas analysis and medical monitoring

Includes:

• Rechargeable battery pack
• 120 VAC charging adapter
• Soft case

3015-5696 PGM-IR Portable Area Gas Monitor - for Halogen-based Refrigerant Gases by Bacharach

The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.

The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
• Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6* gases
• Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
• Cut leak inspection times by 50%
• Instrument comes with battery pack, probe, charger and soft case with shoulder strap
• LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
• Locate leaks within display cases where traditional leak detectors cannot
• Applications include refrigerant gas detection, trace gas analysis and medical monitoring

Includes:

• Rechargeable battery pack
• 120 VAC charging adapter
• Soft case

44522 Gasurveyor 522 4 Button Portable Gas Detector - PPM, LEL, VOL, O2 by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

10097840 Altair Pro Single-Gas Detector - Hydrogen Sulfide (H2S), 25 Pk, BP, P.Grn by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

44536 Gasurveyor 536 4 Button Portable Gas Detector - PPM, LEL, VOL, CO, H2S by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

3015-8015 PGM-IR Portable Area Gas Monitor, HCFC, without Battery by Bacharach

The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.

The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
• Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6 gases
• Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
• Cut leak inspection times by 50%
• Instrument comes with battery pack, probe, charger and soft case with shoulder strap
• LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
• Locate leaks within display cases where traditional leak detectors cannot
• Applications include refrigerant gas detection, trace gas analysis and medical monitoring

Includes:

• Rechargeable battery pack
• 120 VAC charging adapter
• Soft case

3015-4790 (IATA) PGM-IR N20 Monitor by Bacharach

The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.

The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
• Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6 gases
• Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
• Cut leak inspection times by 50%
• Instrument comes with battery pack, probe, charger and soft case with shoulder strap
• LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
• Locate leaks within display cases where traditional leak detectors cannot
• Applications include refrigerant gas detection, trace gas analysis and medical monitoring

Includes:

• Rechargeable battery pack
• 120 VAC charging adapter
• Soft case

T804 Trogloprobe Portable Inspection System, Standard by Troglotech

The T804 Trogloprobe is all you need for successful and professional inspection.

our standard system – supplied ready to use

• The complete system is fully waterproof
• Extremely robust – all housings machined from solid metal
• WiFi connectivity for immediate reporting to customer
• SD DVR with SNAPSHOTS and high-definition video recording
• Auto-Uprighting high definition camera as standard
• SAFE - Battery Operation with 8-hour use from single charge
• True daylight-readable high definition monito

safety first

Our systems are all battery operated so there are no trailing wires to trip over, no dangerous voltages or generators required. We use the latest battery technology to provide a full days work from a single charge of the Power Cell.

included with your Trogloprobe T804

• T800 auto-uprighting camera head
• Integral Digital Video Recorder – up to 32 Hours recording on one Flash card – Snapshots + Video Recording
• 9-page Textwriter with rod-counter, time & date and various display modes
• Power Cell – up to 8–hours use from a single charge
• High-Brightness monitor - designed for daylight use with sun-shade
• Full skid set for 3", 4" and 6"
• Mains Charger with country-specific Mains Lead
• Full User Manual
• 61 Metres (200 feet) of reinforced, flexible rod

44532 Gasurveyor 532 4 Button Portable Gas Detector - PPM, LEL, VOL, O2, H2S by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

T804 Trogloprobe Portable Inspection System, Extended by Troglotech

The T804 Trogloprobe is all you need for successful and professional inspection.

our standard system – supplied ready to use

• The complete system is fully waterproof
• Extremely robust – all housings machined from solid metal
• WiFi connectivity for immediate reporting to customer
• SD DVR with SNAPSHOTS and high-definition video recording
• Auto-Uprighting high definition camera as standard
• SAFE - Battery Operation with 8-hour use from single charge
• True daylight-readable high definition monito

safety first

Our systems are all battery operated so there are no trailing wires to trip over, no dangerous voltages or generators required. We use the latest battery technology to provide a full days work from a single charge of the Power Cell.

included with your Trogloprobe T804

• T800 auto-uprighting camera head
• Integral Digital Video Recorder – up to 32 Hours recording on one Flash card – Snapshots + Video Recording
• 9-page Textwriter with rod-counter, time & date and various display modes
• Power Cell – up to 8–hours use from a single charge
• High-Brightness monitor - designed for daylight use with sun-shade
• Full skid set for 3", 4" and 6"
• Mains Charger with country-specific Mains Lead
• Full User Manual
• 61 Metres (200 feet) of reinforced, flexible rod

SPMF-F1AU SPM Flex Fixed Unit for Australia by Honeywell Analytics

Improving safety and productivity with the most flexible, user-friendly tape-based gas detector for low-level toxics Feel more confident than ever in your plant's safety and uptime.

In your critical operations, where distruptions can cost millions of dollars, do you have the right instrument for your toxic gas monitoring system? One that your workers feel confident using? One that provides the gas intelligence you need?

With SPM Flex, you never have to worry whether your single-point monitor will stand up to harsh conditions whether a false alarm will lead to a costly shutdown, or whether your workers will be able to correctly operate the device.

Instead, you can count on our Chemcassette® tape-based SPM Flex for unmatched accuracy, flexibility and ease of use - even in challenging environments. So you can rest assured that you're keeping your people safe and your operations running.

Rugged and reliable

Stands up to harsh conditions. Working in the sun and rain, around blasts of steam, or other challenging environmental conditions? The SPM Flex goes where you do, standing up to changes in temperature and humidity without compromising accuracy.

It also works well in cleanrooms, thanks to its Teflon coating that doesn't attract dust. And if it's ever exposed to toxic gas or caustic liquid, just hose it down or use a decontamination wipe.

New Enhancements

• Additional gas formulas
• Flip screen
• Duty cycle to reduce Chemcassette® usage
• K-factor multiplier

Crisp, clear visibility - from near and far

Visible at a distance

Thanks to a crisp display and a color-coded LED bar on top of the SPM Flex, you can see alarm status, gas concentration and other data easily from a distance. So even if you're not right next to your SPM Flex, you always know the health of your unit and the safety of your area.

Remote viewing through the web

Your visibility even extends to other rooms and buildings, thanks to the unit's web capabilities. Simply plug an Ethernet cable into the SPM Flex, and use the easy-to-read web interface to see the status of the unit - no matter where you are.

Flexible uses throughout your plant

Thanks to its robust design and intuitive operation, the SPM Flex can perform a variety of roles.

Emergency Response

When your emergency response team needs to respond quickly, the SPM Flex is the best tool for the job. With fast startup, easy operation in hazmat gear and rugged design, the SPM Flex is ready when you are.

Life Safety

The SPM Flex, capable of working as both a fixed and a portable unit, is an important addition to your toxic gas monitoring system. Use it to investigate suspected leaks, or, if you have a monitoring point that's out of service, use the SPM Flex to replace it - with the option to plug it in or use the long-lasting battery.

Tool Maintenance

When your crews need to perform maintenance on a process tool, they can take the SPM Flex with them to ensure safety while they work. With full data logging and an industry leading gas selection, you'll always have the assurance that your staff are safe every day, all day.

Advanced capabilities - no expertise required

Your workers may not use the SPM Flex every day, but when they need it, they'll be able to operate it with confidence. That's because this highly automated single-point monitor is intuitive, easy to use, and designed to fit the unique needs of your operation.

Easy to choose the target gas

Want to monitor for a certain gas? Just turn on the SPM Flex, snap in the proper Chemcassette® tape, and use the intuitive LCD menu to select the gas from the list. Need to monitor for a gas in a different family? Just swap out the Chemcassette tape and choose the new gas. No ChemKeys™ required.

Quick start-up for emergency response

The SPM Flex gets up and running in under two minutes - so your response team can quickly gear up and go to the site.

Easy to use with protective equipment or hazmat gear

Purpose-built with the user experience in mind, the SPM Flex is easy to carry, operate and read - even when you're wearing a hazmat suit or other protective gear. The monitor has large, chunky buttons that are easy to use. And when you carry the SPM Flex, the display faces up so it's easy to read.

Extreme Accuracy for Extreme Gases

The SPM Flex, the next evolution of our SPM and TLD gas detectors with Chemcassette tape technology, is capable of working as both a fixed and a portable unit. The monitor detects the ultrasensitive gases inherent in your operations, including: Hydrides, Mineral acids, Oxidizers, Amine.

Our Chemcassette tape technology shows the presence of gas - quickly and definitively with a physical record. So you can prevent costly downtime from false alarms.

Data logging and information management for total confidence

Access to detailed history

With the SPM Flex, you can rest assured that every monitoring moment is being recorded - and ready for analysis whenever you need it. Whether you want to report a gas incident or investigate a trend, the monitor keeps up to a three-month history of gas concentrations, alarms, tape changes and other factors. Plus, you have the option to view this data through a web server, or you can easily download it to a USB drive.

Easy to adjust configurations

Need to change the detection limit for a gas? Alter the parameters for latching alarms? Just adjust your settings with the intuitive menu - then use the USB port to download and transfer them to other units. So it's a snap to deploy multiple monitors with a consistent configuration.

Designed to the highest standard of reliability

Easy maintenance and long-lasting battery

The SPM Flex has easily serviceable parts and a reliable battery, so you can count on long-lasting portable use - and an affordable cost of ownership. Even more, if the SPM Flex is plugged in and you lose power, the internal battery kicks in as backup so the unit keeps monitoring.

All backed by the history and reputation of Honeywell

With the SPM Flex, like other products from Honeywell, you can have peace of mind from knowing your gas detection equipment is engineered to the highest standard of safety and reliability. We honor the investment you've made, and we're here to support you, giving you complete confidence in your facility's gas safety, compliance and uptime.

Honeywell Gas Detection Offerings

Honeywell gas detectors protect people, assets and environment from toxic and combustible gas hazards, helping to create safer, more comfortable, secure and productive environments. Our strength derives from Honeywell's leadership in sensor technology; in fact Honeywell operates four sensor manufacturing plants, supplying an entire industry with its core detective element.

Commercial

Gas detection from standalone units to fully engineered, multi-point systems, all offering cost-effective regulatory compliance.

• Applications: parking structures, chillers, mechanical rooms, office towers, commercial buildings, shopping centers, swimming pools, golf courses, schools and universities, laboratories

Industrial

Renowned Sieger and Manning gas detection systems with advanced electrochemical, infrared and open path sensing technologies.

• Applications: oil and gas, cold storage, water/wastewater treatment, chemicals, engine rooms, plastics and fibers, agriculture, printing and light industrial

Portables

Single or multi-gas ranging from compact, lightweight designs for personal protection to systems-based, networkable instrumentation for industrial hygiene.

• Applications: underground utility and electricity ducts, boiler rooms, post-fire sites, sewers, industrial plants, industrial hygiene, first responder teams, remote fleets

High Tech/Government

Reliable gas and chemical detection including infrared spectroscopy (MST) with no cross interference, to Chemcassette paper-based solutions (MDA Scientific) offering detection down to parts per billion.

• Applications: semiconductor manufacturing, aerospace propulsion, specialty chemicals industry, research laboratories, emergency response

Technical Services

24/7 global network includes post-sales service and Systems Integration teams.

• Emergency call out, service contracts, on/off-site repair, training and commissioning
• Complete range of spares, consumables and accessories