Oakton Instruments

WD-35807-00 Semi-Domed, Double-junction pH Electrode (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-35604-40 SALT 6+ Handheld Salinity Meter with Probe, -10 to 110°C Temperature Range and 1 to 50.0 ppt, 0.1 to 5.00% Salinity Range by Oakton

Great for quick, accurate, and affordable salinity measurements

These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Meter includes protective rubber boot that also acts as a meter stand.

• Includes protective rubber boot with stand, salinity/temperature probe (K = 1.0), and four AAA batteries
• Measures in ppt or %
• Large display is easy to read

WD-35801-72 Double-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature

WD-35608-57 Conductivity/TDS Cell, Ultem Body, Steel Sensor, 10 ft Cable, K = 0.1 (Use with CON 400, CON 410, TDS 400, pH/CON 300 and pH/CON 510 meters) by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

WD-35411-00 CON 700 Meter with Probe & Stand by Oakton

An affordable way to take consistent, accurate conductivity measurements in your laboratory!

CON 700 meter reads 0 to 199.9 mS across five ranges autoranging feature automatically gives the best resolution for your measurements. Calibrate at up to five conductivity points (one per range) for improved measurement accuracy. Adjustable temperature coefficient provides additional accuracy. Cell constant is selectable for very high or low range measurements - meter is flexible to your application. Selectable manual or automatic temperature compensation gives greater precision.

Meter is encased in a compact 6-1/8" L x 6-7/8" W x 2-3/4" housing which takes up a minimum of bench space. Water-resistant membrane keypad and convenient pullout reference guide provide useful features for the lab. Large dual display shows conductivity or TDS and temperature and has a ready indicator and HOLD function.

• Compact size frees up bench space
• Large brightly lit display allows for easy reading of measured values
• Easily toggle between conductivity and TDS at the touch of a button!

WD-35613-50 pH 5+ Meter with ATC Probe, Rubber Boot, and Batteries by Oakton

High ±0.01 pH accuracy at economical prices

The microprocessor-based pH 5+ meter is OAKTON s most economical portable pH meter, yet it gives you the same high accuracy and reliability of our other portable meters! Use this meter to take routine pH and temperature measurements. Meter includes a protective rubber boot that also acts as a meter stand.

• Includes pH 5+ Portable pH Meter with rubber boot, and batteries
• Reads pH and temperature
• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH electrodes with BNC connectors

WD-35801-74 Double-junction, Glass-body, Refillable pH Electrodes (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature