Oakton Instruments

WD-35613-24 pH 6+ Meter Kit, 0 to 100°C Temperature Range, 0.00 to 14.00 pH Range, and ±1999 mV Range by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

WD-35613-22 pH 6+ Meter with Probe, 0 to 100°C Temperature Range, 0.00 to 14.00 pH Range, and ±1999 mV Range by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

WD-35820-40 Industrial Conductivity Cell, 10 ft Cable, 3/4 MNPT Threaded Housing, Epoxy Body, Stainless Steel Sensor, K=0.01 (Use with CON 100, CON 200, CON 1000, and RES 1000 controllers) by Oakton

Feature built-in temperature compensation

• Designed for continuous in-line monitoring
• Feature stripped ends for easy wiring

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)
• K = 0.01 for resistivity measurements (at or below 2 µS)

Install these rugged cells in a pipeline, or submerse in a tank.

Dimensions: 142 mm L x 12 mm dia. Shpg wt 0.5 lb.

WD-35617-50 Electrode Stand (Use with Electrodes up to 14 mm diameter) by Oakton

Holds up to four standard size electrodes (14-mm dia max) and one ATC probe. Weighted 6" dia base lets you pivot holder 360° for added convenience. Flexible arm lets you move electrode side-to-side or up-and-down while keeping electrode at a constant vertical angle.

• Hands free pH measurement

WD-35607-50 Conductivity/TDS Cell, Epoxy Body, K=1.0 (Use with CON 100, 200, and 500 meters) by Oakton

Feature built-in temperature compensation

Each conductivity/TDS cell features a 3-ft cable and a two-band platinum sensor. Epoxy body cells have a temperature range of 0 to 80°C; glass and stainless steel body cells have a temperature range of 0 to 100°C.

• Epoxy, glass and stainless steel models available

Choose from three different cell constants.

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS).
• K = 0.1 for low conductivity measurements (near or below 20 µS)

WD-35653-02 "Singles" pH 7.00 Buffer Solution Pouches, 20 pouches per box each with 20 mL of solution by Oakton

Choose from economical solution bottles or individually sealed pH buffer pouches.

All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to ensure quality. ±0.01 pH at 25°C.

OAKTON pH buffer solution bottles are labeled with the name and CAS number for all ingredients (for Right-to-Know requirements), and are supplied with an MSDS (Material Safety Data Sheet).

OAKTON pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• Labeled with pH vs temperature tables for accurate calibration

WD-35607-91 CON 150 Portable Waterproof Conductivity Meter Kit with NIST Certificate by Oakton

The CON 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you view the conductivity or TDS measurement simultaneously with temperature. Convenient auto-ranging and auto-cal functions for one calibration point per measurement range. Select a two-cell probe with a 0.1, 1.0, or 10 cell constant and automatic temperature compensation (ATC). ATC ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and probe status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons probe status displays cell constant
• Grip-Clip holder quickly and easily secures the probe to your beaker or container
• Expanded data logging for up to 150 data sets
• 700 hours battery life or optional universal power adapter
• Built-in stand and wall-mount option allow for easy laboratory measurement or storage

WD-35801-77 Double-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 10, pH 100, pH 500, pH 1000, pH 2500 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer other All-in-One electrodes

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a mini phono plug connector for temperature