Jenco

791JF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

671PKA Benchtop pH/mV/Temp Meter Kit by Jenco

pH/mV/Temp. benchtop meter with LCD digital display, voltage recorder output, Karl Fisher output and Pt-100 ATC or manual temperature compensation. Calibration is via knobs and potentiometer. Connectors are BNC or U.S. standard connector with reference pin and banana plugs for ATC and recorder. AC/DC Powered.

Includes:

• 671P Benchtop pH/mV/Temp Meter
• 600P pH Probe
• 600D115 AC Adapter

• All solid state design
• Low drift and high stability
• Fast input response
• Battery low indicator
• Standby batteries for field application
• Karl fischer current output
• Analog recorder output
• 50hz, 60 hz rejection
• Manual and automatic temperature compensation
• 0 to 100°C temperature measurement
• Auto-polarity mv measurement
• UL approved ac line adaptor

9251MKC Handheld Polarographic Meter with Memory Kit by Jenco

Includes:

• 9251M: DO meter with memory
• LD-900-10/10: DO Field Probe, Stainless Steel, 10K, 10-ft Cable, 8-Pin
• LD-900-03A: Membrane Kit with 6-Membrane Caps & KCL Solution
• 9250F: Carrying case
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

6231NKB pH/mV/Temp. Microprocessor Handheld Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231N pH/mV/Temp. Microprocessor Handheld Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Extension Cable

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

791LKC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

6231MKB pH/mV/Temp Microprocessor Handheld Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

Includes:

• 6231M pH/mV/Temp Microprocessor Handheld Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Cable

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6231MKD Accessories Kit for 6231M Meter by Jenco

Includes:

• 6230F Case
• 6230D115 AC Adapter
• Buffers & Bottles

6250KA Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

693-ORP 2-Wire DC Blind ORP Transmitter, NEMA-4 Case by Jenco

2-wire 4-20 mA ORP transmitter in a sealed NEMA-4 enclosure powered by 11 to 80 Volts DC. Span is fixed 1400 mV span. Connections are BNC for mV/ORP.

• Input/output isolated
• Nema 4x enclosure
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• Wide range power supply ,12 to 80 VDC

765EF Thermocouple Panel Thermometer, Type E, Range -157 °F to 1832 °F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

7001APL Microprocessor Panel Meter, 1/8 DIN, Selectable by Jenco

Panel mount digital thermometer user selectable for type via external dip switch with front panel touch switch for selecting °C or °F. Features bright red LED display and a 1/8 DIN plastic housing. Model 7001APL has Min/Max switch for display of Min/Max temperatures. Available for types. J, K, T, E, N, R, S, DIN-T and DIN J. Ambient range-10 to 60°C. 115/230V AC operation.

• CMOS microcomputer design
• Cold junction compensation
• T/c calibration for types-k,j,t,e,n,r,din t,din j
• T/c type, resolution and unit default select by dip switch
• Wide temperature ranges
• Error indicators
• Front panel °C/°F selectable
• 1°C/0.1°C resolution selectable
• Min/max display
• 0.56 led display
• Easy to install, metal mounting bracket
• Wide operation temperature
• High accuracy and low cost

3173K0.1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK10 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• 107: Conductivity Probe, K=10.00
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

9250MKA D.O. & Temperature Handheld Polarographic Meter with Memory & RS-232 Kit by Jenco

Includes:

• 9250M D.O. & Temperature Handheld Polarographic Meter with Memory & RS-232
• LD-900-8-DO Stainless Steel Field Probe with 8-Pin Connector 8-Pin Connector & 10-ft Cable
• LD-900-03A Membrane Kit with 6 Caps & KCL Solution

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

609 pH Handheld Meter by Jenco

pH handheld meter with LCD digital display and manual temperature compensation. pH calibration is via knobs and pH slope calibration potentiometer. Meter has voltage recorder output and BNC connector. AC/DC Powered.

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Large energy efficient led display
• Manual temp. compensation for pH measurement
• 6conventional aabatteries
• Low drift and high stability
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output

6360KC Handheld/Portable pH/ORP/Conductivity/Temperature Meter Kit by Jenco

Includes:

• 6350N: Conductivity mete
• 600P: pH/Ref. electrode
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule