Jenco

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

6312DTF (120V) Fermentable/Sterilizable Dissolved Oxygen Analyzer, 5-Relays 120V by Jenco

• Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status and transmitter current mA output simultaneously.
• Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for dissolved Oxygen and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65

6308PT 1/4 DIN Panel Mount pH Single Parameter Analyzer by Jenco

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.

• Bright, graphical LCD display, 1.5 x 2.25
• Simultaneous measurement and analysis
• 1/4 DIN watertight, ip65 rated enclosure
• Reversible & isolated 4 to 20ma output with adjustable bandwidth
• Continuous controller / relays operation during calibration
• 4-digit password security protection
• Programmable set point hysteresis
• Automatic temperature compensation
• CE approved
• Built in ISO9001 certified facility
• Membrane keypad with audio feedback
• Power down, non-volatile memory backup
• RS-485 output
• Multiple spst on/off relays
• Embedded self diagnostic program
• High 50/60 hz noise rejection

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

• Clear LCD displays pH or mV, with temperature and relay status simultaneously.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Displays absolute and relative ORP.
• Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
• 2 programmable on/off relays: 2 for pH or ORP.
• CE Approved
• Password protection.
• IP65

6312CTB Conductivity/TDS/Temp Industrial Online Controller by Jenco

• Graphic LCD with manual backlight displays conductivity/TDS, temperature, relay status and transmitter current mA output simultaneously.
• Convenient one point calibration and calibration data is stored in memory and is ready for use on power up.
• Two sets of Isolated and reversible 4-20 mA current output for conductivity and temperature allows it to be used as a proportional output.
• 2 programmable on/off relays conductivity.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.

6311 Single Parameter pH or ORP Analyzer by Jenco

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved.

• Ph/ORP/temp. measurement & control
• Display pH electrode efficiency
• User selectable ATC element: 3k balco, 10k, and pt-1000
• Reversible & isolated 4~20ma output
• RS-485 output
• Bumpless calibration
• Graphic LCD dispaly,128 x 64with backlight
• Membrane switch with audio feedback
• Auto temp. compensation
• High 50/60 hz noise rejection
• Pipe/wall/panel mounting
• 1/4 DIN watertight enclosure
• One programmable relay for temp.
• CE approved
• Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output

6312DTF (220V) Fermentable/Sterilizable Dissolved Oxygen Analyzer, 5-Relays, 220V by Jenco

• Graphic LCD with manual backlight displays dissolved oxygen, temperature, relay status and transmitter current mA output simultaneously.
• Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for dissolved Oxygen and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65

6308CT Conductivity Analyzer Graphic Display, 3-Relays, IP-65, RS-485 by Jenco

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.

• Bumpless calibration
• CE approved
• RS-485 output
• Programmable relays for conductivity
• Reversible and isolated 4 to 20ma output
• Programmable relay for temperature
• Conductivity/temp.measurement & control
• Simultaneous analysis and display for measurement and controls
• User programmable reference temperature temperature coefficient
• Selectable 2-wire or 4-wire cells for long cable length & wide measurement range

6312PTB pH or ORP Analyzer/Controller, 4-Relays, IP-65 Case, RS-485 by Jenco

• Graphic LCD with manual backlight displays pH, temperature, relay status, and transmitter current mA output.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Two sets of isolated and reversible 4-20 mA current output for pH and temperature allows it to be used as a proportional output.
• 4 programmable on/off relays: 3 for pH and 1 for temperature.
• RS-485 output for remote access allows multiple units to be connected and ganged together.
• Password protection.
• IP65.

6309POT 1/4 DIN Panel Mount pH & ORP Analyzer by Jenco

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 2 pH and 2 ORP fully programmable relays and one for temperature. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.

• Ph/ORP/temp. measurement & control
• Display pH electrode efficiency
• Reversible & isolated 4~20ma output
• RS-485 output
• Bumpless calibration
• Graphic LCD dispaly,128 x 64with backlight
• Membrane switch with audio feedback
• Auto temp. compensation
• High 50/60 hz noise rejection
• Pipe/wall/panel mounting
• 1/4 DIN watertight enclosure
• One programmable relay for temp.
• CE approved
• Programmable linear/ORP current output or programmable linear/ anti-logarithmic current output

6308OT ORP Analyzer Graphic Display, IP-65 case by Jenco

ORP analyzer, 1/4 DIN panel mount IP-65 case, Features 4 for fully programmable relays and 1 for temperature. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Graphical display. Tinned lead connectors. CE Approved.

6219KB Digital pH/mV/Ion/Temp Meter Kit by Jenco

Includes:

• 6219 Digital pH/mV/ION/TEMP Meter
• 6005C Cable
• 6230A-ST Temp. Probe
• 6230D115 AC Adapter

• Two LCD display pH, mV, direct ion concentration and temperature.
• Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
• User selectable resolution of up to 0.001 for greatest accuracy.
• Direct read out in ion concentration to simplify ion measurements.
• RS-232 computer interface with software.
• AC adaptor or battery power (low battery indicator).

9173 Large LCD Polarographic Dissolved Oxygen Benchtop Meter by Jenco

Dissolved Oxygen benchtop meter with extra large LCD display for ease of use. The meter uses polarographic type sensor with replaceable membranes and programmable pressure compensation, 600 to 1000 mBar and salinity compensation, 0 to 40.0 ppt. Communications is via. Features dual LCD displays for D.O. and temperature. ATC is a 10k thermistor. Power is 115/230V AC or by battery.

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Clear LCD displays D.O. as percent air saturation or D.O. as parts per thousand, simultaneously with temperature.
• Manual or automatic temperature compensated (ATC) D.O. readings.
• User selectable salinity and pressure compensated D.O. readings.
• Works with accurate and reliable polarographic D.O. probes.
• Convenient one point calibration for D.O. calibration data is stored in memory and is ready for use on power up.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for D.O. and thermistor.
• AC adaptor or battery power.

9251MKD Accessories Kit for 9251M Meter by Jenco

Includes:

• 9250F: Carrying case
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

pH618NC pH/Temperature with Memory and Replaceable pH Electrode by Jenco

VisionPlus pH618N is the successor of the popular pH618 advanced pH tester with IP67 body, temperature readout, 50 data point storage, menu driven operation and replaceable electrode module. VisionPlus pH618N takes useful features typically found in larger, portable meters and packed them into a small, easy to use package. Available in two different models: one for °Celsius temperature readout and one for Fahrenheit temperature readout.

VisionPlus pH618N is RoHS compliant.

• Graphical LCD provides on-screen menu selection for manual-free, easy operation.
• On-screen messaging displays useful information such as meter status, buffer selection and operation modes. no more guess work involving cryptic indictors or flashing digits.
• 50 memory storage of both pH and temperature readings with memory location id and date and time stamp.
• 4-button keypad provides intuitive operation with separate buttons for data hold, calibration, data memory storage and memory retrieval.
• IP67 rated, water-proof dust-proof body.
• Glass bulb electrode exposes more measuring surface to solution for fast response time.
• Surface mounted temperature element improves temperature accuracy and response time.
• Indicates exact date and time of last calibration so users can decide optimal maintenance schedule.
• Real-time date and time display.
• Clear LCD displays pH and temperature at the same time, along with meter status, calibrated buffers, status, date and time.
• Large temperature range for wide range of applications.
• 1,2, or 3 point calibration, with automatic buffer recognition of us and nist buffer sets.
• Calibration data is stored in memory, ready for use on power up, even when batteries are removed.
• Readings are automatically compensated for temperature (ATC).
• Data hold for convenient reading.
• Watertight case is ideal for rugged use. protective cover for pH electrode is included.
• Replaceable electrode module ensures extended usefulness.
• Belt clip which also attaches to neck strap.
• 1 year warranty.

619F pH/Temperature with Graphical Display and Replaceable pH Electrode by Jenco

VisionPlus pH619 fits the gap between the top of the line pH618N and the lower end pH630. With IP67 body, temperature readout, menu driven operation and replaceable electrode module. VisionPlus pH619 is a powerful and easy to use pH tester. Available in two different models: one for °Celsius temperature readout and one for Fahrenheit temperature readout.

VisionPlus pH619 is RoHS compliant.

• Graphical LCD provides on-screen menu selection for manual-free, easy operation.
• On-screen messaging displays useful information such as meter status, buffer selection and operation modes. no more guess work involving cryptic indictors or flashing digits.
• 4-button keypad provides intuitive operation with separate buttons for data hold, calibration, data memory storage and memory retrieval.
• IP67 rated, water-proof dust-proof body.
• Glass bulb electrode exposes more measuring surface to solution for fast response time.
• Surface mounted temperature element improves temperature accuracy and response time.
• Clear LCD displays pH and temperature at the same time, along with meter status, calibrated buffers, status, date and time.
• Large temperature range for wide range of applications.
• 1,2, or 3 point calibration, with automatic buffer recognition of us and nist buffer sets.
• Calibration data is stored in memory, ready for use on power up, even when batteries are removed.
• Readings are automatically compensated for temperature (ATC).
• Data hold for convenient reading.
• Watertight case is ideal for rugged use. protective cover for pH electrode is included.
• Replaceable electrode module ensures extended usefulness.
• Belt clip which also attaches to neck strap.
• 1 year warranty.

111 Conductivity Pocket Pen Style Tester (0.1 to 19.9 mS/cm) by Jenco

Conductivity pocket pen style tester, automatic temperature compensation from 5 to 55°C, with calibration via trimmer. Power 4 x 1.5 V batteries, 200 hours typical.

• Auto temp. compensation