Jenco

6230M pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

701KC Temperature Magnetic Back Meter, Type K by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

6010MKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

9173R Large LCD Polarographic Benchtop Meter with RS-232 by Jenco

Dissolved Oxygen benchtop meter with extra large LCD display for ease of use. The meter uses polarographic type sensor with replaceable membranes and programmable pressure compensation, 600 to 1000 mBar and salinity compensation, 0 to 40.0 ppt. Communications is via. Features dual LCD displays for D.O. and temperature and an RS-232-C interface. ATC is a 10k thermistor. Power is 115/230V AC or by battery.

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Clear LCD displays D.O. as percent air saturation or D.O. as parts per thousand, simultaneously with temperature.
• Manual or automatic temperature compensated (ATC) D.O. readings.
• User selectable salinity and pressure compensated D.O. readings.
• Works with accurate and reliable polarographic D.O. probes.
• Convenient one point calibration for D.O. calibration data is stored in memory and is ready for use on power up.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for D.O. and thermistor.
• AC adaptor or battery power.

3175K0.1 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

Includes:

• 3175: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

9251M Handheld Polarographic Meter with Memory Kit by Jenco

Includes:

• 9251M: DO meter with memory
• LD-900-10/10: DO Field Probe, Stainless Steel, 10K, 10-ft Cable, 8-Pin
• LD-900-03A: Membrane Kit with 6-Membrane Caps & KCL Solution

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

6230MKC pH/mV/Temp. Microprocessor Handheld Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6230M pH/mV/Temp. Microprocessor Handheld Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6230A-ST Temperature Probe

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6250KC Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6230A-ST Stainless Steel Temperature Probe
• 6230D115 AC Adapter
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

3673 Transmitter/Controller, Pulse Frequency Output, LCD. 1/4 DIN by Jenco

The models 3672, 3673 and 3675 are precise instruments for the measurement and control of pH and mV (ORP).

A large LCD display is used for readability under bright ambient conditions.

The models 3672, 3673 and 3675 are housed in a rugged 1/4 DIN plastic case, allowing it to fit into standard panel cut-outs as well as the most commonly available industrial weatherproof and environmental housings.

701TC Temperature Magnetic Back Meter, Type T by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

217 Universal Loop Powered Indicator, NEMA 4X by Jenco

The model 217 is a high performance, industrial grade, loop powered process indicator housed in an environmentproof NEMA-4X plastic case.

The model 217 can be field programmable for 4-20 mA or 10-50 mA operations.

Internal DIP switches in conjunction with the 25 turn ZERO and SPAN controls, decimal point position select, dummy zero select and polarity select, allows the model 217 to be scaled to display in any engineering units.

610 pH Tester Personal Pocket Pen by Jenco

pH Tester personal pocket pen style with single point calibration. 4 x 1.5 V Batteries

• Dip and read, easy to use pH pen

701JC Temperature Magnetic Back Meter, Type J by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

3173RK Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 007N Electrode Arm Holder

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.