GMI

67440 GT-44 Portable Gas Detector - ppm / LEL / GAS by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• User Handbook
• Quick OP Instructions
• Calibration Certificate
• Configuration Report

67441 GT-44 Portable Gas Detector c/w Case and Accessories - ppm / LEL / GAS by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• Carrying Case with Solid End Probe
• Tygon Tubing
• Hydrophobic Filter (Pack / 4)
• Wrist Strap
• Handbook
• Quick Operating Guide
• Calibration Certificate
• Configuration Report

44511R Gasurveyor 511R 4 Button Portable Gas Detector - LEL, VOL - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

64011 PS200 1-Gas Personal Safety Monitor - LEL, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

44511 Gasurveyor 511 4 Button Portable Gas Detector - LEL, VOL by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

67401 GT-40 Portable Gas Detector c/w Case and Accessories - ppm / LEL / GAS / CO by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• Carrying Case with Solid End Probe
• Tygon Tubing
• Hydrophobic Filter (Pack / 4)
• Wrist Strap
• Handbook
• Quick Operating Guide
• Calibration Certificate
• Configuration Report

67410 GT-41 Portable Gas Detector - ppm / LEL / GAS / O2 by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• User Handbook
• Quick OP Instructions
• Calibration Certificate
• Configuration Report

64111 PS200 1-Gas Personal Safety Monitor - LEL, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

44523R Gasurveyor 523R 4 Button Portable Gas Detector - LEL, VOL, H2S - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

64022 PS200 2-Gas Personal Safety Monitor - LEL/H2S, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

44521R Gasurveyor 521R 4 Button Portable Gas Detector - LEL, VOL, O2 - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

42503 Gasurveyor 3 - 500 2 Button Portable Gas Detector - LEL, VOL by GMI

The GMI Gasurveyor 500 series is GMI's most technologically advanced range of gas detectors to date. GMI has developed this new range of standard instruments to cover the majority of your gas detection requirements.

Features

• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use, 2-button operation
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Audible/visual alarms for all gas ranges
• Fault alarms for low flow, low battery, etc.
• Compatible with the GMI range of Auto Calibration Systems

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

64013 PS200 1-Gas Personal Safety Monitor - H2S, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64021 PS200 2-Gas Personal Safety Monitor - LEL/O2, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64131 PS200 3-Gas Personal Safety Monitor - LEL/O2/H2S, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

67431 GT-43 Portable Gas Detector c/w Case and Accessories - ppm / LEL / GAS / CO / O2 / H2S by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• Carrying Case with Solid End Probe
• Tygon Tubing
• Hydrophobic Filter (Pack / 4)
• Wrist Strap
• Handbook
• Quick Operating Guide
• Calibration Certificate
• Configuration Report

64133 PS200 3-Gas Personal Safety Monitor - LEL/H2S/CO, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64112 PS200 1-Gas Personal Safety Monitor - O2, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

67400 GT-40 Portable Gas Detector - ppm / LEL / GAS / CO by GMI

Designed for the gas industry, the GT Series are multi-application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT Series is the most versatile instrument available for working with gas.

The GT 40 series offers technicians and workers a single instrument that can be used throughout the gas distribution and transmission pipelines for all measurements needed for leak testing, and confined space entry. Bright LED alarm lights illuminate as gas levels increase, and audible alarms are activated at preset levels should they be programmed. Completely programmable, the GT is an industry standard throughout the Americas and Europe and allows companies to utilize only one instrument for all their monitoring needs. The GT series is available with an optional docking station for full calibration and testing capabilities, and printed cal certificates if needed.

Features

• Measures up to 4 gases
• Gas leak detection
• Confined space monitoring
• Surveying and purging
• PPM, LEL and Volume Methane flammable gas ranges for leak detection
• Manual and automatic datalogging
• Loud audible and high visual 'ticker' (Geiger) on ppm range
• Integral flashlight
• Alkaline or rechargeable battery options
• Charging via simple power cable or docking station
• Rugged polycarbonate case, sealed to IP54

7 Application Modes

• Leak Test Mode measures methane in three different distinct ranges (ppm/LEL/%Volume). Autoranging between all three ranges, audible, visual, and gieger alarms, and ergonomical design allows for easy one handed operation. Also ideal for carbon monoxide investigations.
• Confined Space Mode measures up to 4 gases (O2, LEL, CO, H2S) simultaneously with audible visual alarms, datalogging, and min/max values.
• Bahole Mode for testing undrerground leaks. In this mode the GT measures gas beginning in the LEL range and autoranges to % Volume. Barhole probe included with instrument.
• Carbon Monoxide Mode measures CO directly in ppm. Menu items for air free CO (O2 correction) when fitted with an O2 sensor, and differential CO.
• Purge Mode for measuring methane from 0-100% Volume in inert atmospheres.
• Sniffer Mode enables rapid leak detection by measuring methane 0-10000 ppm with the semi-conductor fitted at the end of the flexi probe. Audible/visual gieger allows for easy pinpointing of leaking pipes.
• Pressure Mode measures from 0-60" of water column via a pressure sensor on the back of the instrument. Ideal for tightness tests on gas systems up to 2 PSI.

Includes

• User Handbook
• Quick OP Instructions
• Calibration Certificate
• Configuration Report

44525R Gasurveyor 525R 4 Button Portable Gas Detector - LEL, VOL, CO - Rechargeable by GMI

The GMI Gasurveyor 500 series is the most flexible range of gas detectors available today. By simple selection of hardware and software options the instrument can be readily configured to suit your exact application.

Features

• Measures flammable, oxygen and toxic gases
• Dual mode operation - Combustible Gas Indicator (CGI) / ConfinedSpace Monitor (CSM)
• Rechargeable or alkaline battery options
• Approved to European and North American safety standards
• Extremely robust anti-static case
• Simple to use
• Built-in sampling pump as standard
• Large LCD with automatic backlighting in low level light conditions
• Compatible with the GMI range of Auto Calibration Systems
• Audible / visual alarms for all gas ranges
• Fault alarms for low flow, low battery etc.
• Probes for a wide range of applications

Includes

• G500 carrying case
• Harness
• Hex driver
• 1.5Mt clear sample line
• User manual
• Probe handle
• 35 cm probe (solid end)
• Sample line adaptor
• Dry cell batteries (not USA) or NiCad pack and cotton filters (20).

64134 PS200 3-Gas Personal Safety Monitor - O2/H2S/CO, Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64041 PS200 4-Gas Personal Safety Monitor - LEL/O2/H2S/CO, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.

64024 PS200 2-Gas Personal Safety Monitor - O2/H2S, Non-Pumped by GMI

The PS200 is a rugged, easy to use portable multi-gas detector ideal for use in confined spaces and hotworks. Both lightweight and durable the instrument monitors and displays up to four hazardous gas conditions simultaneously using catalytic bead sensor technology for a wide range of combustible gases, and electrochemical sensors for carbon monoxide, hydrogen sulfide, and oxygen deficiency. Operator interface and calibration are intuitive and easy by toggling between simple one-button functions. During hazardous conditions users are alerted via three alarm functions: vibration, red flashing LEDs, and audible buzzer. To ensure the highest level of personal safety, the PS200 is also fitted with an optional man down/motion sensor that activates alarms if the instrument is not moved at a pre-set time. The instrument is also fitted with an optional built in remote sampling pump making it ideal for use in confined spaces. The PS200 features a screen backlight that can be manually switched on in poor lighting conditions. Additional features include: customized user identification code setup, calibration due date display, and standard data logging that can be downloaded to a docking station via USB connection to a computer. Also available is a auto bump and cal station, 5-way charger and PC data logging software.

Features

• LEL, O2, CO, H2S
• Internal Pump
• Data Logging Standard
• Auto Bump & Cal Station
• Simple 1-button operation
• Audible, visual and vibrating alarms
• Fully certified
• Lightweight
• Sensor integrity checking
• Robust construction
• Ease of maintenance

Includes

• User CD
• Quick Op Guide
• Universal Charger/Comunications Cable
• 6 months Calibration certificate.