Jenco

pH610N Digital Non-Bluetooh, LCD Display pH + Temperature Pocket Tester by Jenco

Waterproof, economical pH/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable pH and temperature results easily and affordability. This was accomplished by starting Jenco s longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 point or 2 points calibration
• ±0.05 pH accuracy

Simple Operation

• Clear, large LCD displays pH and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

3331 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

765PTBF Thermocouple Panel Thermometer, Type PTB, Range -58°F to 1562°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

701JC Temperature Magnetic Back Meter, Type J by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

6230NKC Handheld pH/mV/Temp Microprocessor Meter Kit by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6230N Handheld pH/mV/Temp Microprocessor Meter
• 600P pH electrode
• 6230A-ST Temperature Probe

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6230NKD Accessories Kit for 6230N Meter by Jenco

Includes:

• 6230F Case
• 6230D115 AC Adapter
• Buffers & Bottles

765KF Thermocouple Panel Thermometer, Type K, Range -157°F to 1999°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

pH630FA pH/Temperature & Replaceable pH Electrode by Jenco

Large LCD display pH/temperature pocket tester, easy to use calibration procedure for the novice.

VisionPlus pH630FA is a rugged, easy to use, IP67 rated pH tester with temperature readout. Key features include IP67 rated body, automatic temperature compensation, up to 3 point calibration and replaceable electrode module. This pH tester is RoHS compliant.

• Automatic temperature compensation
• 1, 2 or 3 point calibration
• Stores calibration data
• Replaceable electrode module
• High noise resistance
• Simultaneous display of pH and temperature
• Large temperature range
• Dedicated button for data hold
• Low battery indicator
• IP67 rated body for water-proof and dust-proof
• RoHS compliant

6230N Handheld pH/mV/Temp Microprocessor Meter with 3-Point Calibration & RS-232 by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

3101S Conductivity Controller with Analog Output, Adjustable 0-99.9 mS to 0-99.9 uS by Jenco

Conductivity controller with analog output, panel mount, 1/8 DIN aluminum case, K=1.0 cell constant with front panel cell adjust potentiometer and front panel potentiometers for Hi/Lo set points for the Hi and Lo relays. Features bright red LED display and red uS/mS LED indicators. Analog Voltage output is 1 mV/LSD, +/- 0.5%, +/- 1 mV . Power 115/230V AC.

• Wide, selectable range via internal dip switch
• Dual relays
• 0.56 high efficiency red led display
• For cell constant k=1.0
• Analog voltage output
• Auto temp. compensation
• Heat cycled 100 hrs
• Front panel operation
• 50/60 hz noise rejection

pH6810NK VisionPlus pH/mV/Temp. Meter Kit by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

Includes:

• PH6810N: Meter
• 6810NP: PH/Temp/Ref. Electrode
• pH6810F: Soft pouch with pH4, pH7 capsules & bottles

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot