Digi-Sense

08506-80 Type T Disc Surface Thermocouple Probe by Digi-Sense

Tape vinyl-insulated 10-kt gold-plated disc sensor onto any flat surface.

• Ideal for checking small surfaces
• Grounded junction for safety from contaminants

Includes

5-ft straight PVC-insulated cable with miniconnector.

94460-79 Traceable® Radio-Signal Remote Thermometer with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

A total of three modules may be used with the main receiver.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

98766-09 Traceable 300-Memory All Function Digital Stopwatch with Calibration by Digi-Sense

Three-line display on this multipurpose stopwatch/timer/chronograph shows running time, cumulative-split, and interval-split - simultaneously. Easily repeat functions of countdown alarm timing as a stopwatch. Set timer to count down at any time from 10 hours to 1 second. When zero is reached, the timer alarms and begins to count down again from the programmed time. The repeat cycle continues automatically, or until stopped.

Display always shows running time remaining to zero and cycles counted from 1 to 300. Stopwatch also includes pacer, stroke, and speed calculation functions. As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the week. O-ring sealed water- and shock-resistant ABS plastic case has nonskid rubber edges.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Recall up to 300 memories both during and after event timing
• Set time-of-day alarm
• Pacer function works great for physical education tests

Includes

One 3 V button cell, lanyard, and NIST-traceable calibration certificate with data.

08068-31 Irreversible 1-Point Square Temperature Label, 84F/29C; 50/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

09035-00 Irreversible 10 Point Vertical Temperature Label, 104-160°F/40-71°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1°C from 29 to 99°C, ±1.5°C from 100 to 154°C, and ±1% ± 1°C from 160 to 280°C. Shelf life: one year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Self-adhesive design

WD-20250-13 Pressure and Flow Meter with NIST-Traceable Calibration by Digi-Sense

Ideal tool for helping HVAC field technicians determine the performance of heating and cooling systems. This handheld meter measures differential and static pressure, and calculates air velocity and flow. Meters are heavy duty, easily configurable, and feature a large backlit LCD. View measurement data in graphical formats as well as record and download data with included software for further analysis.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Displays pressure, air velocity, and airflow plus environmental temperature
• Relative time clock on Max/Min/Avg readings provides a time reference for major events
• Save and recall up to 99 sample readings per parameter
• Data logging software with graphical display provides quick and simple data interpretation
• USB connectivity allows downloading of data to PC
• Large backlit LCD for clear reading in dimly lit environments
• Auto power-off extends battery life

Applications

• Evaluating duct performance and proper airflow
• Inspecting air filtration
• Monitoring HVAC operation in factories and warehouses
• Ensuring safe working conditions in office buildings and schools
• Adjusting motor speeds in HVAC systems

Includes

Pitot tube with two rubber hoses, USB cable, software CD, hard carrying case, battery, and NIST-traceable certificate with data and uncertainties.

WD-20250-14 CFM/CMM Vane Thermoanemometer with NIST Traceable Calibration by Digi-Sense

The Digi-Sense CFM/CMM Vane Thermoanemometer (Model 20250-14) measures air velocity, airflow (volume), and temperature. The large, easy-to-read backlit LCD includes primary and secondary displays plus numerous status indicators. The meter features 2 memory locations (1 for CFM and 1 for CMM) to store and recall commonly used area sizes. The instrument is fully tested and calibrated to NIST-traceable standards. Careful use of this meter will provide years of reliable service.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measure eliminate the need for conversion
• Measure air velocities up to 5900 ft/min (30 m/s) to cover a broad range of applications
• Measure air flow up to 999,900 CFM, 999,900 CMM
• Two memory locations, one CFM and one CMM, store commonly used vent area sizes to save you time
• Large dual-function 4-digit LCD with backlight for easy reading
• Auto power-off extends battery life
• Fits comfortably in your hand

Includes

Vane probe sensor with 3.9-ft (1.2-m) cable, three AAA batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-22 Data Logging USB Vane Anemometer with NIST Traceable Calibration by Digi-Sense

Operate as a handheld instrument or mount for flexible positioning. Takes and records precise air velocity measurements in seven user-selectable units. Easily download data to a PC for analysis and graphing. Use recorded data to enhance safety and comfort in your environment.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measurement: ft/min, m/s, mph, km/h, or knots
• Measure air velocities up to 3937 ft/min (20.0 m/s)
• Adjust sampling intervals from once every two seconds to once every 24 hours
• Two modes (manual and automatic) start data logging function
• Analyze and graph logged data
• Collect up to 32,000 readings in memory
• Visual LED alerts with selectable high and low alarm levels

Applications

• Measure and analyze component cooling air velocities
• Test and evaluate ventilation air velocities in working, living, and storage areas
• Analyze and troubleshoot ventilation performance
• Monitor outdoor wind velocities

Includes

Data analysis software on CD, articulated screw-on mounting stand, one 3.6 V replaceable battery, and NIST-traceable certificate with data and uncertainties.

08009-26 ASTM Like Liquid-In-Glass Thermometer; 39C / Solvents Distillation, 100mm Immersion, 48 to 102C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

98766-04 Traceable® Digital Stopwatch with Calibration; 500-Memory by Digi-Sense

This stopwatch/timer/chronograph displays time of day, date, day of the week and features a time-of-day alarm. As a stopwatch the unit acts as a single action, time out, cumulative split, interval split, continuous roll-over timing timer. Additional features include countdown alarm, countdown then count up alarm, countdown repeat, pacer, and stroke functions.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Water-resistant to seal out moisture, dust, and fumes
• Also displays the fastest, slowest, and average lap time

Includes

One 3 V cell button battery, lanyard, and NIST-traceable calibration certificate with data.

18527-16 Miniature Type-J Thermocouple Female Connector, 2 Pin by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

90300-20 Calibrated Liquid-In-Glass Thermometer; 0 to 300F, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Nonmercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

94461-31 Traceable® Compact Two-Channel Digital Timer with Calibration by Digi-Sense

Compact size and two channels make this timer ideal for the lab. Set two channels independently in count-up or countdown mode. Distinctive alarm sound for each channel beeps for one minute after set time has elapsed. For repetitive tests, memory function automatically returns the display to the original set time.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Built-in stand, pocket clip, magnet, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

WD-20250-02 2 Input Data Logging Thermocouple Thermometer, Type K/J with NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

18528-02 Spade Lugs, Alumel, for Type K Thermocouples; 10/pk by Digi-Sense

• Maintain accuracy by choosing spade lugs that match the composition of your thermocouple wires
• Available in the most common reference materials
• Avoid confusion - each connector has the material abbreviation stamped into it
• Sold in packs of ten

98766-84 Traceable Thermohygrometer with Memory and Calibration by Digi-Sense

This precalibrated humidity and temperature meter is ideal for routine or round-the-clock measurements in quality-control and critical environments. Obtain minimum and maximum temperature and humidity readings in labs, hoods, clean rooms, coolers, stockrooms, incubators, environmental chambers, and chemical storage areas. Monitor conditions overnight, on weekends, or for any time period.

Unit continuously displays current conditions, simultaneously, from a range of 25 to 95% RH and 32 to 122°F (0 to 50°C). Obtain instant readings - the solid-state sensors show changes in less than 30 seconds. Display updates once per second.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Fulfills CLIA requirements for monitoring temperature and humidity
• Read and clear MIN/MAX temperature and humidity measurements
• Switch between °F and °C temperature readings

Includes

Hook and loop tape for versatile mounting, bench stand, two AA batteries, and NIST-traceable calibration certificate with data

03313-66 Traceable Fast-Response Thermohygrometer with Calibration; 5 to 95% RH, -40 to 220F by Digi-Sense

Thermohygrometers accurately measure humidity and temperature, and calculate dew point. Program high/low audible/visual alarms for temperature, humidity, and dew point. Choose from two models: universal or fast-response.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2005(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Audible alarm and flashing display actuate when high or low limits are exceeded

Includes

ABS plastic housing, probe with 4 1/2-ft cable, one 9 V battery, plastic carrying case and NIST-traceable calibration certificate with data.

WD-20250-46 Replacement Sensor for Temperature/RH Touch Screen Recorder by Digi-Sense

Accessories to support your 20250-40 Digi-Sense Temperature Humidty Touchscreen Recorder.

94460-45 Traceable® Temperature Controller with Timer and Calibration by Digi-Sense

Control heating elements, cooling blocks, hot plates, heating mantles, cooling systems, or incubators to ±1°C. Brilliant 1/2" H LCD displays the temperature and time; red LED shows on/off mode. Accuracy is traceable to NIST standards. Battery keeps settings safe from power outage for one year.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Program up to three pairs of on/off switchings per day
• Use manual override without disturbing temperature or time settings

Includes

Relay, 3 1/2 ft relay cable, 3 1/2-ft sensor cable with integral sensor, NIST-traceable calibration certificate with data, and two AAA batteries.

08006-06 Galileo Thermometer; 60 to 100°F (16 to 38°C), 24 in. by Digi-Sense

Colorful glass thermometer is based on Galileo's theory developed over 400 years ago: in liquid, a body of fixed mass becomes less buoyant as the liquid temperature rises, and more buoyant as the temperature decreases - due to changes in liquid density. As temperature changes, the multi-colored balls rise and fall within the liquid-filled thermostatic tube. Lowest sphere in the top group within the instrument indicates ambient temperature.

• Hand-crafted thermometers
• Non-mercury liquid
• Eleven floating spheres provide both Fahrenheit and Celsius readings
• Twenty-four inches tall

92000-02 Touchscreen 12 Channel Scanning Data Logging Benchtop Thermocouple Thermometer by Digi-Sense

This 12-channel scanning thermometer simultaneously monitors different temperature processes and provides real-time data on your PC with the supplied data acquisition software. The thermometer also functions as a data logger, storing readings in internal nonvolatile memory for later download to PC in CSV format.

Visible alarm alert you when a channel logs a temperature exceeding the high or low set point. Thermocouple temperature probes are sold separately.

• Each channel is independently programmable with thermocouple type and alarm conditions
• Large 5" full-color touchscreen LCD displays each channel simultaneously
• Log up to 320K data points in 10 log files
• Download or stream data to PC

Includes

data acquisition software, 10-ft (3-m) micro USB cable, 4 GB USB flash drive, cable holders, grid support bracket, and 5-ft (1.5-m) detachable power cord with universal plug adapters.

18525-26 Type T Hermetically Sealed Tip Insulated Thermocouple, 10ft L, 24 Awg by Digi-Sense

Do not subject type J exposed-junction probes to moisture as they will rust

• Each Probe is hermetically sealed and tested to 25psi
• Can be used for applications requiring an isolated junction.
• Response Time: 0.75 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped lead ends Custom designs or changes to this product are available upon request

20250-63 AC/DC Clamp Meter with Bluetooth® Connectivity by Digi-Sense

Using our free Digi-Sense D/S Meter app, this AC/DC clamp meter with Bluetooth® technology allows you to transmit data directly to your Android or iOS device. Now you can view data at a safe distance from dangerous equipment or hazardous locations and even use your smart device as a real-time secondary display for checking measurements, eliminating the need to write down readings on paper. The results are automatically stored in the app with a date-and-time stamp and can be saved as a CSV file and emailed for future reference, manipulation, or analysis to help determine trends and conditions over a long period of time. Use the app to attach photos and notes to the records creating a clear reference point for your work - ideal for record keeping at large sites.

The AC/DC clamp meter measures AC current to 1000 A AC, voltage (AC and DC), resistance, capacitance, frequency, temperature, duty cycle, and continuity. Special functions include auto ranging, data Hold, Max/Min readings, diode test, audible continuity check, over-range indication, low-battery indication, and auto power-off. The 1-3/16" (30 mm) jaw opening is ideal for use in small compartments or boxes with tightly arranged electrical wires. The meter also offers True RMS for more accurate current readings, and temperature measurement via a type K thermocouple.

The instrument is fully tested and calibrated to NIST-traceable standards for reliable measurements right out of the box, saving you time and money!

Key Features

• Get the most out of your data with our user-friendly mobile app
• Unlimited data storage based on smart device capacity
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Rugged double-molded housing provides increased durability
• Electronic overload protection prevents damage
• Large backlit LCD permits viewing in low-light conditions

Includes

Test leads, type K thermocouple, carrying case, 9 V battery, and NIST-traceable calibration.

09035-36 Irreversible 1 Point Temperature Label, 193°C/380°F; 50/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design