Jenco

3321 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

pH6810NK VisionPlus pH/mV/Temp. Meter Kit by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

Includes:

• PH6810N: Meter
• 6810NP: PH/Temp/Ref. Electrode
• pH6810F: Soft pouch with pH4, pH7 capsules & bottles

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot

6231M pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

765PTAF Thermocouple Panel Thermometer, Type PTA, Range -58°F to 199.9°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

6303C-pH Programmable Transmitter/Controller, LCD Display, 1/4 DIN by Jenco

The model 6303 is a precise instrument for the measurement and control of pH. It can also be used to measure but not control temperature and mV. A built-in micro- controller stores, calculates and compensates for all the parameters relating to pH determinations, such as the temperature characteristics of the pH electrode, pH electrode offset voltage and pH electrode slope deviations, etc.

77A-RTD Thermocouple/RTD 2-Wire Transmitter, Type RTD, Ambient Temperature Range -40 to 85 °C by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available