Gas Clip Technologies

DOCK-CHARGER Dock Charger Replacement by Gas Clip Technologies

std. 110v power supply (for all GCT Clip Docks)

GCT-IR-LINK GCT IR Link Comm Module (For all monitors) with USB Cable by Gas Clip Technologies

Gas Clip Technologies IR Link is an effective tool for communicating with all Gas Clip Technologies products. In conjunction with our instrument specific software, the IR Link can be used to both program and retrieve information from the instruments. The IR Link requires a USB port and respective software in order to properly operate.

Gas Clip Technologies IR Link software provides users the ability to communicate and program the Single Gas Clip or SGC Plus units individually. In order to communicate with the instruments, an IR Link is required. Once installed, users will be able to change instrument settings, download unit event logs and upgrade firmware. Following is a full list of features offered by the IR Link software:

• High Alarm
• Low Alarm
• Calibration Interval
• Bump Interval
• User ID
• Self Test Interval
• Show Sensor Readings
• Hide Bump Due LED flashing
• Hide Clock
• Hibernate
• Save Event Log
• Model Number: GCT-IR-LINK

MGC-DOCK-PUMP-ETH MGC Pump Clip Dock Ethernet by Gas Clip Technologies

Testing dock in portable case with gas compartment, regulator, gauge, charger & USB plus ethernet connection (for use with MGC Pump Infrared & MGC Pump Pellistor)

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.

DOCK-ETHCONV Dock Ethernet Conversion by Gas Clip Technologies

Conversion of any standard GCT Clip Dock to ethernet (for all GCT Clip Docks - GCT labor included)

MGC/MGC-S-DOCKCONV Dock Conversion by Gas Clip Technologies

Conversion of Multi Gas Clip Dock to MGC Simple Clip Dock or visa-versa (GCT labor included)

MGC-WMDOCK MGC Wall Mount Dock - Case, Regulator, Power Supply & USB Memory (For use with MGC Instruments) by Gas Clip Technologies

A New Option in Portable Gas Detection

Twice a day, every day... that's how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge.

A Long-Lasting Family Tradition

The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.

The Secret to a Long Life

Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age- old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.

Ergonomic Design Makes for a Good Fit

The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it s easy to read.

Calibrate the MGC Pump Once Every 12 Months

Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 12 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.

• Runs 5 days continuously without recharging
• Tests for combustible gases (LEL), H2S, CO & O2
• Powerful but quiet pump draws from up to 75 feet
• 1 year calibration cycle saves test gas & time
• LEL sensor (IR) does not require oxygen to detect gas
• Low maintenance cost - IR is immune to sensor poison
• Simple to use one button operation
• Lightweight & durable - alligator clip clamps on tight