Gas Clip Technologies

MGC Multi Gas Clip Detector with Infrared Sensor by Gas Clip Technologies

Battery life for months instead of hours!

Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.

The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What s the secret of the MGC s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.

The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 6 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:

• 2 month battery life (continuous run time)
• 6 month calibration cycle
• Will work in inert environments, no need for oxygen
• Simple to use
• Bump/Calibration reminders
• Docking station compatible
• Programmable user ID
• Compact and lightweight
• Low maintenance cost
• 100% quality control testing

Single Gas Clip

The Single Gas Clip is one of the most advanced portable disposable personal gas monitoring systems in the world. Thanks to Gas Clip Technologies dedication to customer focused designs, the single gas clip has many user friendly features to improve reliability and convenience. The low-maintenance device performs a variety of automatic functions while protecting the user with its unmatched sensor technology. Continuing with its tradition of durable and reliable products, Gas Clip Technologies has produced one of the best single gas monitoring systems on the market.

Single Gas Clip Features

The Single Gas Clip includes numerous features to enhance user experience and reduce maintenance. One such feature is the automatic testing. The clip performs a full function self test at every activation. The same test is also performed every 20 hours. The self test will notify users if there and operability or functional problems with the device. The monitor will also notify users when it is time to perform a bump check. For the reminder, an icon will flash across the screen when the unit is powered on, and a TEST icon will stay fixed at the top of the screen until the user has performed the bump test.

In addition to the testing and reminding features, the Single Gas Clip also includes

• Bump check and calibration identification and confirmation
• User adjustable alarm specifications
• Real-time gas readings or time display capabilities
• A 50% larger battery capacity that competitors
• Docking capabilities with the Gas Clip Technologies Clip Dock
• Infrared communication technology for downloads, configurations, tests, and updates
• Personal 6 digit identification codes

Rugged and Extra Tough

From the hottest to the coldest climates, the Single Gas Clip is designed to withstand the elements. The ergonomically designed casing can withstand accidental drops and common worksite abuse. Its bright yellow outer coating is an added feature intended to be recognizable and distinguishable in the workplace. This helps to reduce the possibility that a user may leave the unit behind instead of bringing it with him. While the outer casing is built to last and can withstand the harshest environments, the entire unit is cost efficient and disposable at the end of its life.

Single Gas Clip Specifications

The portable disposal handheld unit is compact and lightweight. It has dimensions of 3.37 x 1.97 x 1.15 inches and weighs less than 3 ounces. The unit is cased in a durable hard outer casing to protect the internal circuitry. The unit is operable in a wide range of temperatures (generally about -40 to +122 degrees Fahrenheit) and humidity (5% to 95% non-condensing relative humidity). The unit features a triple alarm system with bright visual alarms, a very loud audible alarm at 95 decibels, and a vibrating alarm. This helps to ensure that despite the environmental conditions (loud worksite, bright worksite, hearing protection equipment, etc.) the user can be immediately notified of prospective dangers. Each Single Gas Clip comes with a 2 year warranty (from date of activation) and a 1 year shelf life.

MGC-S Multi Gas Clip Simple 4 Gas Detector with 2 Year Run Time & Infrared Combustible Sensor (H2S, CO, O2 & LEL) by Gas Clip Technologies

No charging ever! No calibration needed!

Detects H2S, CO, O2 & combustible gases (LEL)

Save time never having to charge or service your portable multi-gas detector! Reliably test for H2S, CO, O2 & combustible gases (LEL)) with this simple-to-use & simple-to-maintain detector. Just turn it on & have worry free assurance of protection against toxic gases 24/7 for two full years.

Gas Clip Technologies' continued development and refinement of advanced low-power photometric infrared technology for LEL measurement helps make gas detection simpler than ever in the newest member of their gas detector family - the Multi Gas Clip Simple. No charging ever. No calibrating needed. No Maintenance. It's SIMPLE!

• Runs for 2 years continuously with no charging
• No calibration necessary saving test gas & time
• LEL sensor (IR) detects accurately in oxygen-enriched or oxygen-deficient environments
• LEL sensor (IR) is immune to sensor poison
• Simple to use one button operation
• Low maintenance cost - GCT 100% Quality Tested
• Lightweight & durable - alligator clip clamps on tight
• Tests for H2S, CO, O2 & combustible gases (LEL)

GCT-IR-LINK GCT IR Link Comm Module (For all monitors) with USB Cable by Gas Clip Technologies

Gas Clip Technologies IR Link is an effective tool for communicating with all Gas Clip Technologies products. In conjunction with our instrument specific software, the IR Link can be used to both program and retrieve information from the instruments. The IR Link requires a USB port and respective software in order to properly operate.

Gas Clip Technologies IR Link software provides users the ability to communicate and program the Single Gas Clip or SGC Plus units individually. In order to communicate with the instruments, an IR Link is required. Once installed, users will be able to change instrument settings, download unit event logs and upgrade firmware. Following is a full list of features offered by the IR Link software:

• High Alarm
• Low Alarm
• Calibration Interval
• Bump Interval
• User ID
• Self Test Interval
• Show Sensor Readings
• Hide Bump Due LED flashing
• Hide Clock
• Hibernate
• Save Event Log
• Model Number: GCT-IR-LINK

MGC-WMDOCK MGC Wall Mount Dock - Case, Regulator, Power Supply & USB Memory (For use with MGC Instruments) by Gas Clip Technologies

A New Option in Portable Gas Detection

Twice a day, every day... that's how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge.

A Long-Lasting Family Tradition

The MGC Pump follows in the long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.

The Secret to a Long Life

Like our MGC, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age- old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.

Ergonomic Design Makes for a Good Fit

The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it s easy to read.

Calibrate the MGC Pump Once Every 12 Months

Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 12 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.

• Runs 5 days continuously without recharging
• Tests for combustible gases (LEL), H2S, CO & O2
• Powerful but quiet pump draws from up to 75 feet
• 1 year calibration cycle saves test gas & time
• LEL sensor (IR) does not require oxygen to detect gas
• Low maintenance cost - IR is immune to sensor poison
• Simple to use one button operation
• Lightweight & durable - alligator clip clamps on tight

Single Gas Clip Plus

GGas Clip Technologies recently released their Single Gas Clip Plus. The Single Gas Clip Plus is the first and only portable handheld gas detection that comes standard with a hibernate mode. The hibernate mode is one of the latest advancements in personal monitoring technology designed to provide more convenient and cost efficient features for every day customers.

Exclusive Single Gas Clip Plus Features

The Single Gas Clip Plus can do it all. With the customer in mind, Gas Clip Technologies designed these features to save customers precious time and money. Some of these features include:

• Exclusive hibernate mode
• Status quo gas reading capabilities
• Adjustable alarm specifications
• A batter capacity that is 50% larger than competitors
• Two-way infrared communication for downloads, bump test, configurations, and updates
• Programmable 6 digit identification codes
• Bump check reminders
• Bump check and calibration confirmation and identification
• Docking capabilities

Hibernation and Extended Life

The hibernate mode of the Single Gas Clip Plus is one of the newest feature for this line of products. Gas Clip Technologies incorporated the feedback from its customers, and realized that customers needed a way to place their gas monitors in a rested state when not in use. Simply activate hibernate mode by syncing the unit with the infrared link or inserting the unit in the Clip Dock docking station. Because the unit hibernates and becomes inactive users can extend the life of their battery and their unit.

Cost Savings

With the extended life comes cost savings. With the Single Gas Clip Plus, users can extend the life of their monitor, and reduce the need to purchase replacement units. In the end, users will only pay for the time that is spent with the unit actually in use. Compare this to other models where the clip cannot hibernate. If the monitor only has a specified lifespan, the unit will reach that lifespan regardless of whether it is in use. Fortunately, the Single Gas Clip Plus does not operate this way. Users pay only for the time that they are actually using the clip.

Single Gas Clip Plus Specifications

The Gas Clip Plus is a handheld device with compact dimensions (3.37 x 1.97 x 1.95 inches) and is lightweight (2.7 ounces). The gas clip can operate in a wide range of temperature and relative humidity. The unit also features a triple alarm system with bright visual alarms, an ultra loud audio alarm of 95 decibels, and a vibrating alarm. The triple alarm system helps to ensure that the user and those nearby are properly notified of the potentially hazardous conditions regardless of their surroundings. The device has an operational life of two years and has comes available with a standard warranty.

Gas Clip Technologies

Gas Clip Technologies was founded by the industry s most experienced professionals. Their goal is to provide the world with zero maintenance gas detection systems that are reliable and customizable for any workplace need.

SGC-DOCK Clip Dock-Case Includes Regulator, Power Supply, and USB Memory by Gas Clip Technologies

Gas Clip Technologies Clip Dock is an all in one docking station designed for maximum testing efficiency and portability. Housed in a rugged Pelican© case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.

Traditional docking stations are only designed to test one instrument at a time, resulting in time consuming testing periods as well as unnecessary usage of testing gas. Gas Clip Technologies has significantly improved both testing time and test gas usage with the Clip Dock; users can now test 4 instruments simultaneously saving both time and money. Each Clip Dock comes with the following standard features:

• Test 4 units at one time, up to 12 instruments in a minute
• Easy 1 button operation
• Robust rechargeable internal battery, hundreds of tests before recharging
• Internal gas cylinder regulator and pressure gauge
• 2 GB USB memory for bump test and event log storage
• Optional unit configuration and firmware updates via GCT Manager Software
• Rugged Pelican© case or Slim Dock case
• No computer required to operate
• Model Numbers: SGC-DOCK (Standard); SGC-DOCK-SLIM (Slim Dock)

Features:

Unit Configuration/Firmware Updates: In order to keep your fleet of gas detectors compliant with specific settings, we allow for the Clip Dock to program each unit during either bump testing or calibration. The programmable fields are as follows: User ID, Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock. For example, if your company or facility requires each detector on site to have specific alarm set points and a bump test interval, instead of programming each unit individually, the instruments can be group programmed while simultaneously bump testing (4 units at a time per dock) using our GCT Manager software. As firmware updates become available, we can program each Clip Dock to update units during bump testing and calibration. Facility safety standard compliance for single gas detectors is now easily achievable.

Event Data and Record Storage: In addition to performing tests, unit configurations and firmware updates, the Clip Dock also stores important information about both the docking station and units tested. All tests performed on the docking station can be accessed from either the USB directly or using the GCT Manager software. Each bump test and calibration event is recorded and logged by date, time and serial number. Along with the test records, the individual event logs from each unit are saved. At the time of the test, the detector transmits its event log to the memory. By default, the station will save the previous 10 event logs.

Slim Dock Case: Gas Clip Technologies offers a wall mount solution for our Clip Dock. Instead of being housed in a Pelican© case, we provide a slim cabinet type case that can be easily mounted on a wall. This option can be selected at the time of order or can be ordered separately to convert your existing Clip Dock to a Slim Dock. This option is a perfect fit for facilities or office environments.

Gas Clip Technologies GCT Manager software provides users the ability to communicate and program the Clip Dock or Slim Dock via IR Link or USB memory stick. In order to communicate with a Clip Dock system via infrared, an IR Link is required. Following is a full list of programmable features offered when communicating with the Clip Dock or Slim Dock using the GCT Manager Software via the IR Link:

• Docking Station Location
• Number of Event Logs
• Auto Power-Off Time
• Gas Cylinder Expiration Date
• Gas Cylinder Lot #
• Gas Cylinder Concentration
• Feature Administration Controls
• Station Test Logs
• Individual Instrument Logs
• Inventory Report
• All IR Link Software features

MGC-2 Multi Gas Clip 2 Gas Detector with Infrared Combustible Sensor (O2 & LEL) by Gas Clip Technologies

Battery life for months instead of hours!

Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.

The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What s the secret of the MGC s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.

The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 6 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:

• 2 month battery life (continuous run time)
• 6 month calibration cycle
• Will work in inert environments, no need for oxygen
• Simple to use
• Bump/Calibration reminders
• Docking station compatible
• Programmable user ID
• Compact and lightweight
• Low maintenance cost
• 100% quality control testing

MGC-2-P Multi Gas Clip 2 Gas Detector with Pellistor Combustible Sensor (O2 & LEL) by Gas Clip Technologies

Battery life for months instead of hours!

Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.

The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What s the secret of the MGC s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.

The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 6 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:

• 2 month battery life (continuous run time)
• 6 month calibration cycle
• Will work in inert environments, no need for oxygen
• Simple to use
• Bump/Calibration reminders
• Docking station compatible
• Programmable user ID
• Compact and lightweight
• Low maintenance cost
• 100% quality control testing