Digi-Sense

17050-00 InnoCal NIST-Traceable Calibration; Tachometer by Digi-Sense

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Calibration service for contact tachometers (mechanical), non-contact tachometers (optical), and combination tachometers featuring both contact and non-contact options

WD-20250-60 1kV Handheld Insulation Tester by Digi-Sense

Feel secure with multiple safety features

• Safely measures insulation resistance of electrical devices such as cables or motor coils, as well as providing a means of measuring AC/DC voltages and circuit continuity
• View measurements clearly on large dual-line backlit LCD, plus check trends on analog bar graph
• Autorange feature automatically selects optimal measuring range
• Live circuit detection prevents testing if voltage is present
• Data Hold, test lock function, and flip stand allow hands-free operation
• Automatic discharge of stored voltage for added protection
• Sturdy, double-molded housing with CAT III-1000 V safety rating

Includes

Test leads, plastic carrying case, and six AA batteries.

WD-20250-24 Infrared Wand by Digi-Sense

The Digi-Sense Infrared Temperature Wand (Model 20250-24) is a noncontact measurement accessory to be used with the Digi-Sense Professional series of thermocouple thermometers (models 20250-17, -18, -19, -20).

WD-20250-38 Optional Tri-POD Stand for Meters by Digi-Sense

Use this tripod stand to mount select Digi-Sense test and measurement instruments for stationary measurement applications.

WD-20250-93 Thermistor Thermometer, NIST-Traceable Calibration by Digi-Sense

The Digi-Sense Professional Single-Input Thermometers offer fast response and laboratory accuracy. Features include automatic backlight, Max/Min readings, and automatic power-off. These thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications. Robust and reliable constructed to protects against knocks and jars. These thermometers produce a high degree of accuracy, with a rapid response time, and exceptional battery life of up to 3000 hours.

Digi-Sense instrument are fully tested and calibrated to NIST-traceable standards, saving you hundreds of dollars and extra waiting time to calibrate separately.

Key Features

• Reliable measurements, guaranteed!
• NIST-traceable certificate included
• Heavy duty construction to protect against knocks and jars.
• Super lager LCD for easy viewing of data
• Accepts a wide variety of probes
• Min, Max, and Avg readings, for quick analysis of the object
• Electronic Offset function allows compensation of probe errors

Includes

Protective rubber armor boot with built-in stand, one 9 V battery, and NIST-traceable calibration report with data supplied by InnoCal. Data logging models 20250-92, -94, and -96 also include a USB cable and software.

94460-00 Digi-Sense Traceable® Digital Timer with Calibration by Digi-Sense

Mini count down timer is easy to hold and large controls make it easy to use. Counts down from 100 minutes in 1-second intervals. A 30-second audible alarm sounds when time has elapsed. To save you time, the built-in memory stores the last timer setting.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Magnetic back, one 1.5 V button cell battery, and NIST-traceable calibration certificate with data.

17005-00 InnoCal NIST-Traceable Calibration; Psychrometer by Digi-Sense

Keeping humidity instruments calibrated helps you measure and regulate this variable more accurately. From humidity data loggers to thermohygrometers to high-accuracy handheld instruments, InnoCal offers humidity calibrations for nearly any brand or style of meter from 0 to 95% relative humidity (RH).

• Testing range from 5 to 95% RH
• Standard testing at three points: 30, 60, and 80% RH with one temperature point at ambient (22 to 25°C), with customized tests available upon request

InnoCal services all major brands of hygrometers including Vaisala, Cole-Parmer, Extech, Oakton, Fluke, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
• All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

Features

• NIST-Traceable calibration for psychrometers

WD-20250-05 12:1 IR Thermometer with Temperature Alarm and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

91210-31 Traceable® Two-Channel Thermocouple Thermometer with Offset and Calibration by Digi-Sense

This meter has adjustable offsets on the two channels allowing the user to adjust the thermometer exactly to a specific temperature, in-house calibration, or particular sensor for increased accuracy. Large LCD shows temperatures of probe 1, probe 2, or the difference (delta) of the two probes. Provided with rubberized case making the meter weather- and shockproof. Product features include max, Hold, T1, T2, delta (T1-T2), °F/°C selectable units, and on/off buttons. Accepts type K thermocouple probes with miniconnector.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Rubberized case, wrist strap, and built-in stand

Includes

Two beaded-wire type K probe, NIST-traceable calibration certificate with data, PVC protective casing with flip-out stand, and one 9 V battery.

WD-20250-62 GFCI Receptacle Tester by Digi-Sense

Fast and effortless way to test the safety of electrical socket outlets

• Inspect common faulty wiring issues in main socket installation
• Easily determine faults with bright light indicators
• For use in standard 110 to 125 VAC outlets

WD-20250-47 Extension Cable for Temperature/RH Touch Screen Recorder by Digi-Sense

Accessories to support your 20250-40 Digi-Sense Temperature Humidty Touchscreen Recorder.

• Provides 6 foot extension for the 20250-40 sensor.
• Link up to 3 extension cables together to extend sensor reach up to 18 feet.

WD-20250-12 Thermohygrometer with TSH/TEET, T/C Input and NIST Traceable Calibration by Digi-Sense

Ergonomic handheld thermohygrometers provide a fast and convenient way to accurately spot-check relative humidity and temperature in a wide range of environments and applications. When accuracy is a must in the field, in the lab, or on the process floor, these meters deliver dependable results every time!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlit LCD displays humidity, temperature, dew point, and wet bulb readings
• Feature Min/Max readings and Hold function
• User-selectable temperature readout in °C or °F
• Integrated humidity and thermistor (NTC) temperature sensor
• Auto power-off mode extends battery life
• External thermocouple type K input
• Target superheat mode (TSH) and target evaporator exit temperature (TEET) calculations provide more accurate balancing of airflow systems
• Dry bulb measurement

Applications

• HVAC
• Industrial
• Food industry
• Educational
• Laboratory
• R&D