BW Technologies Monitors

Greater performance with more options for your gas detecting equipment fleet

With IntelliDox systems, you enjoy the benefits of smart docking technology with your Fleet Manager II software program. Compatible units can easily be managed and tracked automatically, to increase overall efficiency.

Instrument management made easy

It won't take long to install the new IntelliDox smart docking system. In fact, the entire installation process takes a couple of minutes or less. Because each module can be operated separately (with separate operating systems, pumps, and readout screens) you can multi-task. For example, it is possible to bump test 2 detectors while you perform calibration on 3 detectors.

Flexibility at your fingertips

Many of the IntelliDox parameters are simple to set, including the high and low alarm set points. This ensures that your gas detectors will never let you down during their entire service lives.

Network and track your data efficiently and conveniently

With both Ethernet and USB options, you can easily store bump testing and peak exposure data.

• Maintenance free detectors - new customizing options
• Track workers and control set points for alarms
• Add on to your docking system (up to 5 modules total)
• Fast and simple setup

Compatibility

BW Clip Series
GasAlertMicroClip Series
ConneX1

Unmatched Bump Testing Performance

Thanks to FastBump, it takes very little time to take care of all bump testing compliance issues. Efficient and economical system saves on test gas and optimizes the entire process

IntelliDoX Features:

• Bump tests, configuration, calibrating, and record-keeping support for compatible units. These settings are user updatable: Schedule Calibration Reminders and Bump Tests; Update Firmware; Gas level Reading Display During Alarm; Event Logs Transfer; Alarm Settings; Enable/Disable Non-compliance Indicator; Hibernation; Preferences for Time Display
• Simple Ethernet network connecting
• Gang as many as 5 modules - each unit has keypad and LCD screen for independent use
• Best FastBump test in the industry. Saves on gas and eliminates bottleneck issues
• No tools needed for setup
• No need for network access to configure or transfer data, thanks to USB port
• Span calibration and bump tests is automatic

IntelliDoX Specs

Size (One module): 5.4 in (13.8 cm) width - 14.2 in (36.2 cm) height - 4.3 in (10.9 cm) depth
Power supply: 12 volt / 8.33A ITE Power Supply
Weight: 4.2 pounds (1.91 kg)
Real-time clock: Date & time stamp
Communications method: Detector and docking module have 2-way (infrared) communication capabilities

External interface

• Ethernet port - 1
• USB port - 1

Menu navigation

• Adjust display settings
• Adjust date & time
• Configure gas inlets
• Review IntelliDoX module
• Password protection (optional)
• Configure UI display language: English, German, Portuguese, Spanish, French

Automatic tests

• Standard bump test: takes 10 seconds
• Fastbumpump: takes 40 seconds

Data Storage: 2 GB internal storage capacity

Pump

• Independent pump for each IntelliDoX module
• Flow Rate is 350 ml/min

Instrument Management System: Fleet Manager II (4.0 and higher)

Ratings: This device complies with the FCC Part 15 and ICES-003 Canadian EMI requirements. Operation is subject to these conditions: (1) Each device may not cause harmful interference, and (2) Each device must accept interference received (including any interference causing undesired operation).

Warranty: Full two years

Options and Accessories

Fully Portable Kit for IntelliDoX test station - comes with a Pelican case. Each kit contains: two docking modules, AC power adaptor, demand flow regulator, ethernet cable, tubing and more.

Multi-Inlet Key

You can configure a single IntelliDoX module to connect multiple calibration gases

A complete list of accessories and kits is available.

DUE TO PRODUCT IMPROVEMENT AND ONGOING RESEARCH, SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

Part Number: DX-MCLP

XT-XWHM-Y-UK GasAlertMax XT II 4 Gas Detector, Combustible (% LEL), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing, UK Version (United Kingdom) by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXWHMYUK

MCXL-XW00-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2) - Yellow Housing by BW Technologies

Do you require portable dual gas monitor equipment that measures oxygen and LEL (lower explosive limit) for maximum worker safety? Is cost very important? How about ease of use and convenience? You should check out all the features and price of the GasAlertMicroClip XL.

Maybe you have heard of the GasAlertMicroClip XT or you might even be using some of them. The GasAlertMicroClip XL has all the great functions and benefits of the XT with one addition. It is made to provide longer battery life. In fact, it is 8 hours longer than the XT model (18 hrs). This is an important feature for long shifts and cold environments.

Compliance checking is simple and easy because the GasAlertMicroClip XL uses the latest IntelliFlash™ technology. In addition, a gas monitor that is simple to wear and lightweight, allows for working without distractions. And, training is very quick and simple because you only have to operate a single button. All throughout the shift, the GasAlertMicroClip works, monitoring O2 and LEL.

If you use the MicroDock II or Fleet Manager II you are in luck. The GasAlertMicroClip XL is specifically designed to work with them. You can even use XL and XT models together.

Why Include GasAlertMicroClip XL in Your Fleet?

• Light and easy to carry around it weighs just 6.7 ounces
• Full 2 year warranty (including the sensors)
• Works in temps as low as -4F
• Affordable can save you money over time
• Water resistant
• Easy and quick compliance verification
• Automatic instrument calibration
• Checks its own vital functions on start up
• Continuous O2 monitoring
• Checks LEL (lower explosive limit)
• Resistant to concussion and impacts
• Supports Spanish, English, German, French, and Portuguese
• IP 66 compliant

GasAlertMicroClip XL Comes with:

• Lithium polymer battery
• AC charger
• Stainless steel alligator clip
• Test hose and calibration cap
• Operating manual with CD

Part Number: MCXLXW00YNA

QT-CK-DL Deluxe Confined Space Kit for the Gas Alert Quattro

This confined space kit contains the following:

• 0.5 LPM Regulator (this is the piece that attaches to the calibration gas cylinder and allows the gas to flow from the cylinder)
• Calibration cap with 1 ft hose (This item is used for calibration and also bump checks. It snaps onto the front of the instrument over the sensor ports)
• Sampling Probe for getting into those hard to reach spaces
• IR Connectivity Kit with Fleet Manager software for downloading datalogging information and changing instrument settings
• Manual Aspirator Kit for taking remote air samples. Operation is fast and easy, simply snap one end on the instrument and drop the tubing into the confined space. Then just squeeze the bulb repeatedly to draw the air sample back to the monitor.
• Custom cut foam insert keeps everything neat and in it's place
• Durable carrying case

Note: Calibration gas must be ordered separately. If your Quattro is the most popular version containing four gases - CO,H2S,O2,LEL then you will need to order part number CG-Q34-4. If your Quattro is a different configuration please see the calibration gas page to find your correct cylinder.

BWC2-H BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High - 15 ppm by BW Technologies

Are you looking for a cost effective and reliable H2S detector to keep workers safe and compliant? The BW Clip BWC2-H is one of the easiest to operate and most dependable portable gas detectors on the market today. In fact, it is designed to deliver maintenance free operation for an entire two years. It is simple to use and there is no need to calibrate. It never needs new batteries or battery charging, and the sensor never needs replacing. It provides a low level alarm at 10 ppm and high level at 15 ppm.

Click for sound

1:49

MicroDock II and Fleet Manager II compatible and the BW Clip BWC2-H will fit right in with your IntelliDoX instrument management system, and you'll enjoy a host of benefits from BW clip units with IntelliDoX technology, such as:

• Testing for 5 units at one time
• Extremely fast bump tests (fastest in the industry)
• Parameter and alarm set point adjustment
• Email notices and easy recordkeeping

BW Clip includes:

• Self test function thanks to Reflex Technology™ your gas sensor will test itself every day to ensure safety, instill worker confidence, and limit downtime.
• Dual reservoir design with Surecell™ technology, you have much faster response time and performance than standard electromechanical sensors. In addition, you'll receive excellent performance in the harshest of work environments.

Standard features includes:

• Lightweight and compact
• Maintenance free (one push button) operation
• 3 function alarm flashes, vibrates and loud 95 decibel sound
• Self testing battery, electronics, and sensor
• Low operating costs
• Rated for extreme temperatures and environments
• Logs last 35 H2S events and bump tests

Configuration Options:

• Flashing red noncompliance indicator - enable bump test due or gas event
• Set both low and high alarm set points prior to activation
• Gas reading can be given with alarm
• Bump test reminder can be set by user
• Display can include the current time of day

Part Number: BWC2H

BW Technologies Metallic Sintered Particulate Filter

Accessories made by BW Technologies are guaranteed to be reliable and effective. The company produces a wide variety of replacement parts and accessories to fit most needs for their products. The BW Technologies Metallic Sintered Particulate Filter is a durable sintered cylinder filter that prevents dirt and debris from damaging, entering, and clogging the pump. This filter is compatible with a range of BW Technologies products. Please consult your product specifications sheet to determine if this filter is compatible with your device.

Part Number: GAMFILTER

BW Technologies Auxiliary Filter Kit (Complete with Filter Adaptor and 5 Filters)

To ensure proper maintenance and operation of BW Technologies gas detection device, users will need to perform regular inspections and maintenance. Depending on the frequency of use, filters and screens may need to be replaced. A filter replacement kit is ideal to have on hand so that after inspection, a user can immediately replace the filters if needed. Clean filters help to protect the device and its internal circuitry from dust, debris, and moisture. This particular kit includes a filter adaptor and 5 filters. A clean filter is critical to extending the life of any gas detection instrument.

Part Number: MCAFK1

GasAlertMicroClip X3 4-Gas Detector, O2/LEL/H2S/CO, Black, North America by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-XWHM-B-NA

BW Technologies Neck Strap with Safety Release

The durable and tough BW Technologies Neck Strap comes with an added safety feature. When on site, the neck strap works to maintain the hands free nature of your portable device. Simply slip the device onto the strip and wear near your mouth or nose. In the event that the neck strap becomes caught in other equipment or is dangerously constricted, the safety release breaks away from the strap. The strap is adjustable and made with a durable industrial strength black cord.

Part Number: GANS1

MC2-X000-B-NA GasAlertMicroClip Extreme Detector Oxygen (O2) - Black Housing by BW Technologies

When purchasing a gas and atmospheric detection device, buyers should evaluate their needs to determine the most appropriate device on the market. At BW Technologies by Honeywell, safety and reliability are top priorities. After years of research and development in gas and hazardous atmosphere detection, BW Technologies has introduced the GasAlertMicroClip XT into the gas monitoring market. Its sleek design and affordable price point place this gas detection system at the top of the market.

When looking for a safe, affordable, and reliable gas monitoring system, look no further than the GasAlertMicroClip XT. The compact and portable design offers the most affordable protection in gas monitoring systems. Using the latest technology, and intuitive user friendly features, users are able to work confidently with knowledge that the GasAlertMicroClip XT will appropriately alert them to possible gas hazards.

Simple design and portability

At approximately 6 ounces, BW Technologies by Honeywell has introduced a safe, reliable, and highly portable gas detection unit. The slender and compact design is met with a bright yellow casing to help ensure that the device is not left behind on the worksite. The casing also helps to make the device water resistant and includes a built in concussion proof boot. In line with its simple design, the GasAlertMicroClip XT features a one button design that is both tamper-proof and intuitive.

Standard features

The exclusive IntelliFlash feature alerts users and those nearby that the GasAlertMicroClip XT is operating and functional. The LCD screen also consistently displays real time gas concentration levels. Like many products developed by BW Technologies, the MicroClip features a standard triple alarm system designed to alert users visually, audibly, and with vibrations. This multifaceted alarm system ensures that users and those nearby are well alerted of possible dangers regardless of visual or hearing impairments, including loud worksites.

Optional features and accessories

The GasAlertMicroClip XT also allows for users to customize certain features. Features such as alarm settings, display settings, test and calibration settings, start-up options, sensors, overrides, and measurements can be manually altered by the user. The MicroClip is compatible with the MicroDock II automatic test and calibration system. Additional accessories can be purchased including auxiliary filter kits, IR connectivity kits, and five unit cradle charges. By allowing users to customize various features and options, BW Technologies is ensuring that its gas detectors will continue to provide value to its buyers for many years.

Specifications

The GasAlertMicroClip XT monitors H2S, CO, O2, and combustible gases at varying measurement ranges. The device is compact at 4.4 inches long by 2.4 inches wide and 1 inch thick and features wide angle alarm bars that indicate alerts from all angles. On activation, the unit will automatically test audible and visual alarms, sensors, battery, and circuitry. The typical batter life is up to 10 hours with a 4 hour recharge time frame. As a testament to its commitment to safety and excellence, BW Technologies by Honeywell also offers a standard 2 year warranty that covers the sensors in addition to the unit.

Part Number: MC2X000BNA

GAXT-D-DL-B GasAlert Extreme Detector NO2 Black by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTDDLB

Part Number: MC2FPCB1

M5IR-XWBY-R-D-D-Y-N-00 GasAlertMicro 5 IR Detector CO2 (IR), %LEL, O2, H2S, CO - NiMH Battery and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5IRXWBYRDDYN00

Part Number: 2302D0833

Making portable single-gas detection simple and efficient.

Compact and accurate

The Honeywell BW™ Solo is extremely user-friendly with a lightweight profile and compact design, coupled with reliability and accuracy.

Low-cost operation over a longer life cycle

Struggling to change out sensors or replace batteries? This is no longer a concern with the Honeywell BW™ Solo. Just pop off the compartment lid to change the sensor filter, with the battery and sensor also easy to replace.

Sensors for standard and exotic gas

Whether you need to test a single gas in a petrochemical plant or a steel manufacturing facility, the Honeywell BW™ Solo offers the right sensor for the job. In addition to oxygen, hydrogen, ammonia, and sulfur dioxide, the detector has sensors for:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

A single-gas detector using the revolutionary 1-Series sensor for increased safety, accuracy and cost-savings.

Ideal for monitoring the most monitored gases, the next-generation 1-Series sensor is designed to continue to provide accuracy and reliability even in harsh and challenging environments.

Standard Gases – Fast Response

The 1-Series sensor offers a rapid diffusion square design and a height that is just a third of other sensors on the market. In a compact package, it is able to detect CO, H₂S, and O₂, with more gas types on the way.

Reduced cost of ownership with a 3-year warranty and 5-year sensor life.

With typical gas detection use, the 1-Series sensor performs for up to 5-years, eliminating the cost of replacement and downtime issues with other sensors. Coupled with a 3-year warranty, this provides confidence in investing in this technology.

Developed by Honeywell

As one of the Honeywell companies, City Technology developed the 1-Series sensor for quality and performance. City Technologies has 4 decades in the industry and produced the 40XXV and the 40xLL oxygen sensors that are used in the BW detectors by Honeywell.

Accuracy and reliability

Easy sensor replacement

Need to change out sensors in the field? With the 1-Series sensor, it is as simple as taking out the old and putting in the new, no breakdown or reassembly required.

Managing Data and Automating Fleet Management Made Easy

Combining the Honeywell BW™ Solo with the Honeywell SafetySuite Device Configurator software and the IntelliDox maximizes compliance, productivity, and safety.

Managing data, configurating and recordkeeping with IntelliDox

The IntelliDox docking station allows easy data transfer with automated actions to transfer test results, complete bump tests, set bump reminders, complete calibration, and modifying set points as well as managing firmware updates. The software also provides transfer of all data, including peak readings and alarms, using an Ethernet or USB connection.

Multiple detectors are no problem. The IntelliDox docks can be grouped in numbers up to five, each with its own LCD screen, pump, and keypad, while sharing power and calibration gas for increased efficiency.

Concise compliance monitoring with Device Configurator

Device Configurator is Windows-based software that allows you to configure alarms, view and transfer data, and to manage all firmware updates from your computer - leading to increased compliance across all sites.

Moving to the Cloud

Yet another option to consider is the use of the cloud-based subscription offered through the Honeywell SafetySuite Device Manager. This allows you to use the cloud to:

• Customize and use specific features to streamline compliance
• Create reports as needed
• Receive email or text messages of alarms in real-time
• Have the ability to see all detectors across multiple sites in a user-friendly dashboard, allowing for immediate response to potential or real concerns

An app for detector setup, configuration and verification of test data.

Any smartphone can be linked to the Honeywell BW™ Solo, and with the use of the Device Configurator app, the Honeywell BW™ Solo can be configured, set points established, firmware updated and many more actions.

This is all done using Bluetooth Low Energy (BLE), which also provides the option to see bump data and calibration results, including who did the last calibration, when it was done, and what the readings were. This data can be entered into a certificate and sent to those requiring the data.

Decease equipment needs by skipping the docking station.

By choosing the wireless connection through the smartphone app, there is no need to have docking stations. The same BLE is used to transfer data from the detector to the desktop software, making it a practical solution for fleet management.

Make safety monitoring effective.

Using the Safety Communicator app allows the safety manager to track data from detectors without needed to be docked. Once paired with the smartphone, the app sends the required readings to a Honeywell monitoring software system, which is then accessed by internet-connected devices. This allows for complete tracking of worker location and safety issues.

Become compliance confident across the operation.

Easy to use detector

In any type of environment, the Honeywell BW™ Solo is designed for easy use. It can be controlled by a one-button system on the job or managed by the Honeywell SafetySuite Device Configurator software. In addition to configuring the detector, measurements on short-term exposure limits (STEL) and time-weighted average (TWA), along with peak gas detection readings, are all easy to access.

Visible compliance or out of compliance status

For easy visibility in any type of environment, the Honeywell BW™ Solo is equipped with the IntelliFlash™ system. This provides a blinking green light for compliance, meaning the detector is monitoring and has been bump tested.

Red flashing lights mean out of compliance. This may include a gas event, the requirement for calibration, or the need for a new battery. With both options available, you can choose the option best suited for the job.

Visual and Auditory Alarms

In addition to a loud, robust alarm, the detector also has LEDs around the detector that flash red during an alarm. The detector also vibrates, making it noticeable in any environment.

Practical Operation and Configuration

Keeping track made easy.

To quickly identify a worker or a location where a detector is used or in the event of an alarm, assign detectors throughout the workplace.

Rolling Peak Gas Readings

The Honeywell BW™ Solo is able to maintain a 24-hour rolling peak reading of the gas you want to detect. This allows control of sub-alarm levels that may be associated with problems.

Common Languages

The Honeywell BW™ Solo can be configured to display gas readings in major languages for use around the world.

Part Number: BWS1-HL-Y

Part Number: DOCK201L00N

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

BWS1-S-Y BW Solo Single-Gas Detector, (SO2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-S-Y

Part Number: SRWMP75

BW Technologies Manual Aspirator Pump Kit with Probe (1 foot or .3 meters)

The BW Technologies Manual Aspirator Pump Kit with Probe is approximately 1 foot in length (or .3 meters). The durable and tough plastic hose ensures that there is no leakage and protects the accuracy of the device's measurements. The unit features a manual aspirator pump complete with an easy grip rubber bulb. The bulb and aspirator are manufactured with the highest safety standards and are sealed to prevent inaccuracy caused by leakage.

Part Number: MCAS01

XT-XW00-Y-NA GasAlertMax XT II 2 Gas Detector %LEL, O2 Yellow by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXW00YNA

GAXT-Z-DL GasAlert Extreme Detector HCN Yellow by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTZDL

DOCK2-0-1C1P-00-G GasAlertMicroClip XT Docking Module (Charging with Power Supply) by BW Technologies

The BW Technologies GasAlertMicroClip XT Docking Module is an ideal and cost effective solution for bump tests and calibration. The lightweight and compact module easily fits on a desktop and includes a power supply for North American power outlets. This device is also an easy solution for maintaining compliance with safety standards and regulations. The unit operates with a 6V wall adaptor or 4 C-cell batteries. The device is compatible with the GasAlertMicroClip XT portable gas detection instrument.

Part Number: DOCK201C1P00G

BWS1-E-Y BW Solo Single-Gas Detector, (ETO) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-E-Y