BW Solo, BW Technologies Monitors

BW Technologies Replacement Label Carbon Dioxide (CO2)

Part Number: BWS-B-LABEL

BW Technologies Replacement PCB Carbon Dioxide (CO2) - Standard

Part Number: BWS-BL-PCB1

BW Technologies Replacement PCB Chlorine (CL2) - Standard

Part Number: BWS-C-PCB1

BW Technologies Replacement PCB Nitrogen Dioxide (NO2) - Standard

Part Number: BWS-D-PCB1

BW Technologies Replacement PCB Ethylene Oxide (ETO) - Standard

Part Number: BWS-E-PCB1

BWS-G-B BW Solo Single-Gas Detector, Ozone (O3) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-G-B

BW Technologies Replacement Label Ozone (O3)

Part Number: BWS-G-LABEL

BW Technologies Replacement PCB Ozone (O3) - Standard

Part Number: BWS-G-PCB1

State-of-the-art Portable Single-Gas Detection

 

Practical, functional, and offers a complete line of sensor options. Replacing the ToxiPro®and the GasAlert Extreme, the next-generation Honeywell BW™ Solo builds on their proven reliable and practical operational use. The Solo offers: Cost-effective ownership Increased use for compliance Protection and safety for workers Connectivity for data transmission

Comfortable to Use

Small, compact, and lightweight, the Honeywell BW™ Solo is an easy detector to use in any type of environment, including hazardous locations.

Easy Maintenance and Service

In the field or on the go, the Honeywell BW™ Solo is designed to allow quick switching of sensors, sensor filters, or batteries. Just pop the door of the compartment open and make the necessary changes – no tools needed.

Sensor for Exotic and Standard Gases

Designed for use across diverse applications and industries, including power plants and petrochemical facilities, the Honeywell BW™ Solo is able to detect:

• Ammonia (NH₃)
• Carbon monoxide (CO)
• Oxygen (O₂)
• Nitrogen oxide (NO)
• Sulfur dioxide (SO₂)
• Ozone (O₃)
• Hydrogen (H2)
• Hydrogen sulfide (H₂S)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Chlorine dioxide (ClO₂)

 

Featuring The 1-Series Sensor for A New Level of Accuracy, Safety and Lower Costs for Single-Gas Detection

Designed for frequently monitored single-gas use, the 1-Series sensor provides fast, acute performance coupled with a long life, even when used in extreme environments.

When Speed is Critical – Fast CO, H₂S, and O₂ Response

Designed to be streamlined, the square sensor design and the lower height of the sensor makes it easier to work with and use in any space. At 1/3 the height of standard sensors, and with the unique square shape, fast responses and rapid gas diffusion is standard.

Best Warranty and Sensor Life

The 1-Series sensor offers a three-year warranty, and the sensor has a typical life cycle of up to five years, depending on the gas exposure. With increased uptime and lower costs of maintenance, this is an investment in your productivity and safety.

Developed by a Honeywell Company

City Technologies, a Honeywell company,developed the 1-Series sensor specifically for the Honeywell BW™ Solo. They are also the company that designed and manufactured the 40XV and the 40xLL long-life oxygen sensors used in our Honeywell BW detector. With 40 years of experience, these are reliable and proven sensors that are built with the highest quality control.

End Nuisance Alarms

Do your workers have to deal with nuisance alarms with existing sensors? The 1-Series sensor eliminates these nuisance alarms while increasing the accuracy of readings, helping to improve compliance. The sensors are designed to work in harsh environments, including temperatures between -40°C to 60°C with or without humidity and transient pressure factors.

Easy Sensor Replacement

Without the need to take the detector apart, or exposure the printed circuit board, switching out a sensor has never been easier. Just take out the existing sensor and replace it with the new one, no special tools or equipment necessary.

Fleet Management, Automation, and Data Centralization Features Save Time

The Honeywell BW™ Solo is designed to integrate with the IntelliDox and Honeywell SafetySuite Device Configurator software for data transfer and sensor control.

Docking with IntelliDox

The Honeywell IntelliDox is designed for easy docking and automatic transfer of data. In addition, the IntelliDox can also perform a range of different actions, including bump tests, bump reminders, adjust or set points, and firmware upgrades. The fleet management software automatically transfers peak readings, alarms, and other specified data when connected to USB or Ethernet.

Up to five IntelliDox can be grouped, or a single dock can be used in insolation. Each dock has a keypad, pump, LCD screen, and operator control. Grouped docks share calibration gas and power.

Boosting and Centralizing Compliance with Device Configurator

Serving several purposes, the ability to use the Device Configurator Windows-based software to export data from the detector to the computer allows for centralized management and configuration. This includes configuring alarm set points, updating firmware and exporting data from one centralized location.

Add the Cloud

Subscribing to the Honeywell HoneywellSafetySuite Device Manage allows your business to use cloud-based technology for compliance management, productivity, and safety. The advantages include:

• easy tracking and quick identification of compliance status and alarms with multiple detectors used across various sites
• Immediate and real-time text or email messages about alarms
• Reporting options
• Central data storage for easy access for reporting, audits or investigations
• Customized features to boost compliance

 

Manage Detectors from Your Smartphone Adding yet another layer of convenience, the Honeywell BW™ Solo can be used with the Connected Worker portfolio in a wireless version.

Control Through the App

The Device Configurator app allows for easy control of the detector once the Honeywell BW™ Solo is linked to your smartphone. This allows the phone app to configure, establish set alarm points, and manage actions from up to 6 meters away using BLE (Bluetooth Low Energy).

The app can be used to see readings, check calibration or bump data and details, and to have a record of past calibrations and results. The app can also consolidate data and mail a certificate to designated stakeholders, which can be verified at launch.

No Need for Docking Stations

The choice to use the app eliminates the need for the use ofIntelliDox docking stations. Instead, the Honeywell BW™ Solo uses BLE to transmit data to the desktop software. For fleet management, this is a cost-reduction option.

Remote Access from Anywhere

With the Safety Communicator app, data is immediately transferred to the monitoring software developed by Honeywell. This is a real-time transfer without the need for docking the detector, allowing for full access to all detector locations from any connected device, improving worker safety on any job.

Increase Compliance for Workers and Safety Managers

 

Gloves On? No Problem for Operation

Hazardous and difficult environments do not mean risking worker safety. The Honeywell BW™ Solo is controlled with the push of a button, even when wearing gloves. Both the one-button operation option and the use of the Honeywell SafetySuite Device Configurator allow for full configuration of the system in any location. This includes STEL or short-term exposure limits, TWA or time-weighted average measurements as well as peak gas detection data.

Visual Safety

Flashing green lights on the Honeywell BW™ Solo indicate compliance with the detector using the IntelliFlash™ feature. Green means compliance and correct monitoring and bump testing.

Flashing red means non-compliance, which can be a battery issue, gas event, or the need for a bump test.

Loud Alarms

Auditory and vibrating alarms, combined with highly visible red LED around the face of the detector, make it easy to see and hear any alarms.

Ease Of Configuration and Use Anywhere

 

Tracking Made Simple

Assigning detectors to workers or to locations makes tracking and monitoring easy and fast.

Rolling 24-Hour Peak Gas Readings

Having data on peak gas readings under the alarm set point over a rolling 24-hour period is essential to prevent potential problems. The Honeywell BW™ Solo provides this data to help make workplaces safer.

Multi-Language Capability

Used across the globe, the Honeywell BW™ Solo offers gas reading data in all major languages.

Part Number: BWS-G-Y

BW Technologies Replacement PCB Hydrogen Sulfide ext. range (H2S Ext) - Standard

Part Number: BWS-H-2-PCB1

BW Technologies Replacement Label Hydrogen Sulfide (H2S)

Part Number: BWS-H-LABEL

BWS-H2-B BW Solo Single-Gas Detector, (H2S ext range) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-H2-B

BWS-HC-B BW Solo Single-Gas Detector, (HCL) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-HC-B

BW Technologies Replacement PCB, Hydrogen Chloride (HCl), non-wireless

Part Number: BWS-HC-PCB1

BWS-HF-B BW Solo Single-Gas Detector, (HF) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-HF-B

BW Technologies Replacement Gas Label, Hydrogen Fluoride (HF)

Part Number: BWS-HF-LABEL

BW Technologies Replacement PCB, Hydrogen Fluoride (HF), non-wireless

Part Number: BWS-HF-PCB1

BWS-HF-Y BW Solo Single-Gas Detector, (HF) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-HF-Y

Introducing the Honeywell BW™ Solo, the next generation in compact single-gas detectors.

 

Designed to be easy to use, simple to service, and to provide the sensor options you need. Replacing the GasAlert Extreme and the ToxiPro®, the Honeywell BW™ Solo offers all of their advantages plus it also: Assists with increased compliance Allows workers to stay connected Lowers the ownership costs Boosts worker safety and protection

Convenient Size

Small, lightweight, and compact, the Honeywell BW™ Solo is easy to use in any work environment, making it a favorite for workers.

Effective Single-Gas Detector

With the combination of the low cost and the long life of the Honeywell BW™ Solo, it is a very effective and reliable gas detector. Need to replace a sensor filter? Just open the door on the front. The same no-tools needed method can be used to change the sensor or the battery.

Single Gas Detection Options

The versatility and ease of sensor switch out on the Honeywell BW™ Solo makes it the ideal detector across any industry. It can be used in the manufacturing and petrochemical industries, as well as in power plants and steel mills to detect the following:

• Ammonia (NH₃)
• Hydrogen sulfide (H₂S)
• Hydrogen (H₂)
• Hydrogen cyanide (HCN)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Oxygen (O₂)
• Sulfur dioxide (SO₂)
• Nitrogen oxide (NO)
• Nitrogen dioxide (NO₂)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)

 

Increase worker safety with the 1-Series sensor for lower operating costs, higher reading accuracy, and faster response.

When fast response, long life, and the ability to provide dependable results in critical, look no further than the 1-Series sensor for common gases.

Oxygen, Hydrogen Sulfide, and Carbon Monoxide

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂. With the unique square design that allows for rapid gas diffusion, it offers fast response times with a streamlined, low-profile sensor. At just a third of the height of other sensors, it is much easier to work with.

Sensor Life and Warranty

Based on typical use and gas exposure, the 1-Series sensor can last up to five years, lowering the cost of ownership while also limited downtime. It also comes with a three-year warranty, protecting your investment.

Developed by Honeywell

City Technology, a company with over 40 years in the sensor industry, is a Honeywell company. By utilizing this experienced in-house company, we are able to offer the next-generation in reliability and quality. City Technology is the company responsible for the 40XV and 40xLL oxygen sensor used with our Honeywell BW detector.

Stop Nuisance Alarms

Designed to provide accurate readings in temperatures from -40°C to 60°C, as well as in environments where humidity and transient pressure are a concern, the Honeywell BW™ Solo is accurate and dependable.

Designed to Use in the Field

Practically designed, workers can easily change out the sensor in the field without the need for any special equipment or exposing the printed circuit board to the environment. It is a simple step of removing the old sensor and replacing it with the new.

Automate, centralize,and streamline with fleet management options.

The Honeywell BW™ Solo, Honeywell SafetySuite Device Configurator software, and the IntelliDox can be used in different ways to boost productivity, compliance, and safety.

Using the docking station for testing, configuration and recordkeeping – fully automated

To use, simply place the Honeywell BW™ Solo into the docking station. The system automatically transfers data and completes any pre-selected actions. These actions include bump reminders and bump tests, modifying set points, updating firmware, or other types of options. The software used for fleet management also automatically sends all peak readings and alarms by USB or Ethernet to your computer.

The IntelliDox docks can also be grouped up to five docks. Each has its own pump, keypad, and LCD screen, but they can be configured to operate in sync or as standalone controls, sharing power, and calibration gas.

The Device Configurator

Device Configurator software is Windows-based and allows the user to see and to transfer detector information and data, manage alarm set points, set up firmware updates, and improve compliance, safety, and productivity.

Expanded access through the Cloud

Opting to use the subscription service of the cloud-based Honeywell SafetySuite Device Manager allows for:

• Complete visibility through a single dashboard for all alarms and compliance of detectors throughout the entire system, including in multiple sites and locations.
• Reporting options customized to your needs
• Notification by text or email of alarms in real-time
• Additional compliance benefits and features
• Single location storage for all data needed in audits, reporting or investigations

 

The ease of Smartphone control and detector management. Through apps in the Honeywell Connected Worker portfolio, the Honeywell BW™ Solo can be controlled through wireless technology.

On the Go Control

Downloading and pairing the Honeywell BW™ Solo with any smartphone allows for full control through the Device Configurator app. This app allows the user to setup, configure, and verify test data from distances of up to six meters away using Bluetooth Low Energy (BLE) technology.

With the app, it is easy to check data, including calibration and bump data, as well as see who performed the calibration, what gas was used, and the readings. In addition, the app can create a certificate and mail it to the required stakeholders, just verify it is available during the launch.

Eliminate Docking Requirements

Using the wireless technology offered with the Honeywell BW™ Solo eliminates the needs for the added equipment and costs of docking stations. The app transmits the data directly to the desktop software, all using BLE.

Enhance Monitoring Ability

The Safety Communicator app by Honeywell also allows data to be shared with monitoring software. This is also a technology that does not require docking, providing real-time information to be accessed by any remote device with an internet connection. Safety managers can easily keep track of workers and safety issues.

Making Safety and Compliance a Reality

 

Control at the Push of a Button

The Honeywell BW™ Solo can be controlled by the Honeywell SafetySuite Device Configurator software, or it can be manually controlled with a simply one-button operation. This makes it easy to use in any workplace, even when wearing gloves, which increases both compliance and safety.

Information at a Glance

The use of Honeywell IntelliFlash™ allows for quick visual confirmation the detector is either in compliance or not in compliance. Activating the IntelliFlash™ provides a green flashing light when the system is in compliance, and a red blinking light if it is not.

Out of compliance can be caused by battery issues, a gas event, or if the detector needs bump testing or calibration.

Loud Auditory Alarms and Visual Signals

If there is an alarm on the Honeywell BW™ Solo, it is loud and visual. With both vibration and auditory alarms, as well as red lights around the detector, even noisy environments become safer.

Making Operation Easy

 

Know the position of detectors and workers

Assigning and pairing detectors with locations or workers allows for immediate understanding of where the detector is located.

Peak Readings over 24 Hours

Offer a rolling 24-hour peak reading measurement; it is possible to find trouble issues before they become problematic. The peak reading is often well below the alarm set point, but it is critical to detect problems early.

Language Capabilities

For use in all areas of the world, the Honeywell BW™ Solo can be configured to provide readings in all major languages.

Part Number: BWS-HL-B

BW Technologies Replacement PCB Hydrogen Sulfide (H2S) - Standard

Part Number: BWS-HL-PCB1

A New Generation of Portable Gas Detection

 

A full selection of sensor options in an easy to service and operate detector. As a replacement for the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the next-generation in detectors for safety, compliance, and productivity. Adding this solution to your fleet will provide: Longer use cycles for lower cost Allow workers to connect Increase safety in any environment Increase compliance with an easy to use detector

 

Durable and Compact

Small and streamlined, the Honeywell BW™ Solo is easy to use, helping to ensure compliance in any workplace.

Low Cost, Long Life, Easy Service

Thanks to a practical design, the Honeywell BW™ Solo is easy to work on in the field. Removing a door on the front is all that is needed to change out sensor filters, replace the battery, or change the sensor – without the need for any tools.

Range of Sensor Options

No matter where you may be working, the Honeywell BW™ Solo offers the sensor you need to measure both typical or less common types of hazards. Use this sensor for the detection of:

• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

It also provides detection for common gases such as Carbon monoxide (CO), Oxygen (O₂), Hydrogen (H₂) and Chlorine (Cl₂).

Getting To Know The 1-Series Sensor

Are you interested in increasing accuracy and lowering the cost of detection while also increasing worker safety? If you are, the 1-Series sensor offers reliability, long duty and life cycle, and a fast response for readings in any type of environment.

Detecting CO, O₂, and H₂S

The square design of the 1-Series sensor allows for fast diffusion of the gas in the sensor, all with a small, square design. More compact than other detectors, it is less than half the size of other sensors on the market.

3-Year Warranty with a 5-Year Sensor Life

Based on typical use, the 1-Series sensor offers up to a 5-year sensor life and the benefit of a full three-year warranty. This helps to extend the duty cycle of the sensors, reducing the cost of ownership while keeping equipment up and running.

Experienced Sensor Development by Honeywell

The 1-Series is designed and manufactured by City Technologies, which is a Honeywell company. City Technologies has over 4 decades of developing top sensors, including the 40xLL long-life and the 40XV oxygen sensors for the Honeywell BW.

Accurate Readings without Unnecessary Alarms

In temperatures from -40°C to 60°C, the 1-Series sensor provides a reliable source of highly accurate readings. It is also an effective detector in environments where transient pressure or high humidity is a problem for other detectors.

Simple Sensor Replacement

The design of the sensor eliminates the need to access the PCB (Printed Circuit Board) during sensor replacement. Just pop it open and switch out the sensor, all without the need for special tools.

Efficient Fleet Management and Centralized Data Collection

As a system, the use of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator make it easy to manage data from the entire fleet. At the same time, this also allows for greater safety, productivity, and compliance with industry standards.

Automate RecordKeeping, Testing, and Configuration

The use of IntelliDox technology and docking stations makes it easy to automatically transfer and store results from testing as well as complete specific tests and actions. The detector is placed in to dock to:

• Configure and change set points
• Bump test
• Set bump reminders
• Update firmware
• Calibrate the detector

 

With the use of fleet management software, all data, alarms, and peak readings are easily transferred to a company through a USB or Ethernet connection.

The IntelliDox can be used alone or combined with four other docks into a group. Each dock offers its own control of detectors, as well as a state-of-the-art LCD screen, pump, and individual keypad. Grouped docks share power and calibration gas for efficiency and operational ease.

Adding Device Configurator

The Device Configurator uses Windows-based software, allowing easy data transfer, deployment of firmware updates across the fleet, exporting of data as well as configuration of alarm set points from one central location.

Move to the Cloud

For enhanced control and management for the fleet, upgrade to the Honeywell SafetySuite Device Configurator manager that uses the cloud. This upgrade allows you to:

• See all detectors on one screen for immediate identification of alarms, compliance, and gas events.
• Automated text and email messages of any alarms across the system
• Multiple reporting options
• Centralize report storage and retrieval for audits or as needed
• Increased compliance across multiple sites

 

Make compliance easy through smartphone management of the detector. One easy way to boost compliance, safety, and efficiency is to choose the wireless version of the Honeywell BW™ Solo that integrates with the Honeywell Connected Worker portfolio.

 

The Advantages of the Mobile App

The Device Configurator is designed to work on a smartphone that has been paired with the HoneywellBW™ Solo. The app allows for configuration of the detector, development of set points and alarms, and even firmware updates using BLE or Bluetooth Low Energy technology.

Is efficiency and compliance important? If so, the mobile app can be used to check data, see readings, and even find out who performed the calibration of the detector as well as information about the gas reading. This is automatically entered into the system, and a certificate can be mailed to those who require a copy.

No Docking Station Needed

The choice to use BLE technology eliminates the need for an IntelliDox. The data can be transferred wirelessly to a desktop computer for easy fleet management.

Monitoring Made Simple

Adding the Safety Communicator app to the smartphone allows for immediate transfer of data without the need for docking. The data is sent to Honeywell monitoring software, and it is available to managers in real-time through the app. For managers, this makes monitoring worker location and safety an efficient process.

Ensure Compliance Through Ease of Use

 

The Push of a Button

The easier any technology is to use in the field, the greater the levels of compliance. The Honeywell BW™ Solo is easy to operate with the push of a button, even when wearing gloves or protective gear. The single button or the Honeywell SafetySuite Device Configurator software makes it simple to set all parameters, alarms, and set points, as well as read short-term exposure limit, time-weighted average, and highest concentrations over the last 24 hours.

Visible Safety and Compliance

A quick glance is all it takes to ensure the Honeywell BW™ Solo is compliant. The IntelliFlash™ can be activated to flash green when the detector is monitoring accurately and has been bump tested.

Non-compliance results in a blinking red light, letting you know the detector has a low battery, there has been a gas event, or the system needs calibration or a bump test.

Getting Noticed

The use of flashing lights, audible alarms, and vibration makes it easy to notice if there is an issue or any danger in any type of environment.

Designed to be Practical

 

Easy Monitoring

The detectors can be linked to workers or locations, making it easy to find the problem area in a gas event.

Rolling 24-Hour Readings

Rolling 24-hour readings provide information on the peak gas reading, even without an alarm. This gives you the heads up for potential trouble spots in the system.

Worldwide Use

Used in countries around the world, the Honeywell BW™ Solo can display gas readings in all major languages.

Part Number: BWS-HL-Y

BWS-M2-B BW Solo Single-Gas Detector, (CO-H2 resistant) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-M2-B

BW Technologies Replacement PCB Carbon Monoxide-H2 resistant (CO-H) - Standard

Part Number: BWS-M2-PCB1

BWS-M2-Y BW Solo Single-Gas Detector, (CO-H2 resistant) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-M2-Y