BW Technologies Monitors

Part Number: MC2FPCB1

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet. Note: The SR-X2V is a direct replacement for the SR-X10 and SR-X10-C1 sensors. It can be used in any instrument that uses those sensors. If you are replacing your O2 sensor this is the best choice because it is an upgraded and more reliable design.

Max XT (internal pump included)

The Max XT confined space kit (CSK) includes:

Part Number: XTXWHMYNACS

Part Number: HOSE175

Part Number: CG2X18.034

BWC2-M BW Clip 2 Year Single Gas Detector, Carbon Monoxide (CO), Low - 35 ppm / High - 200 ppm by BW Technologies

Carbon Monoxide (CO) is one of the most dangerous gases you can encounter, because it is colorless and odorless. You cannot afford to take chances with your well-being and that is why the BWC2-M is a popular choice for portable CO detection today. The BWC2-M is built to give you a full 24 months of dependable and reliable service, and it is one of the easiest gas monitors to use and maintain. It never needs batteries or a new sensor. Low alarm level is 35 ppm and at 200ppm you receive a high alarm (default settings).

Your two year gas monitor can last for as long as three years. For example, if it is in storage for three months, its life is extended by three more months.

Do you use a MicroDock system or Fleet Manager II software? Your BWC2-M will be a welcome addition. Plus, when used with IntelliDoX systems, you receive these benefits:

• Adjustable parameters and alarms
• Rapid bump tests
• Easy recordkeeping
• 5 sensors testing

Technology from BW Clip

Configuring the BWC2-M

Why Buy the BWC2-M?

• Very light and will not weigh you down
• Affordably priced
• No maintenance works by pushing a button
• Loud 95 decibel alarm
• Can record the last 35 gas readings and bump tests
• Very tough - can withstand low temperatures and wet conditions
• The BWC2-M is smart. In fact, it tests its own sensor and battery

Part Number: BWC2M

BW Technologies Sample Probe and Hydrophobic and Particulate Filters

This portable accessory by BW Technologies is easy to use when on the job site. Use this accessory for pick hole sampling or when attempting to sample gas in hard to reach spaces. This particular sample probe has the added benefit of utilizing hydrophobic and particulate filters which help to moisture and debris from entering the detector and damaging its internal circuitry. For a list of BW Technologies accessories that are compatible with your gas detector, please see your product's specifications sheet.

Part Number: GAPROB11

Part Number: SRWMP75

BW Technologies Replacement Carbon Monoxide Sensor

BW Technologies designs, develops, and manufacturers a wide range of replacement sensors for BW Technologies products. The BW sensors are reliable, dependable, and compatible with a variety of BW Technologies instruments. This plug in replacement carbon monoxide sensor detects carbon monoxide gases in a range of 0 to 1000 Ppm. To determine which sensor type is compatible with your BW Technologies device, consult your product specification sheet.

Part Number: SRM04SC

BW Technologies Hydrophobic Pump Filter Replacement (Kit of 100)

For BW Technologies products utilizing a hydrophobic pump, BW Technologies also manufactures a Hydrophobic Pump Filter Replacement Kit. The replacement filters easily fit into the gas detection device and effectively protect the pump and the device from dust, debris, and moisture. This specific kit is available with 100 replacement filters at a very low cost. To determine if this replacement kit is compatible with your BW Technologies device, please consult your device's product specification sheet.

Part Number: XTRFH100

Part Number: GAXTSS

MCXL-XWHM-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing by BW Technologies

Do you require a portable and simple to operate gas monitor that can detect and measure (O2) oxygen, (CO) carbon monoxide, and (H2S) hydrogen sulfide? Maybe you need to be sure that lower explosive limits (LEL) levels are monitored constantly for safety. The 4 gas GasAlertMicroClip XL may be the perfect monitor for your needs. Unlike the XT, which has battery power for as much as 10 hours per charge, the XL has enhanced battery life which will last for 18 hours on a charge. This is an excellent feature for workers that have to put in long hours.

Thanks to IntelliFlash™ technology, it is very easy to check for compliance. And the XL will perform well in the coldest of environments and the hottest temperatures. Training your workers is a breeze as they only need to learn how to use one button. Simple operation keeps workers from being distracted on the job and this leads to greater efficiency and fewer accidents. You can use the XL with the latest Fleet Manager II programs and MicroDock II calibration and auto test systems.

• Lightweight weighs in at 190 grams (6.7 ounces)
• Inexpensive can save on equipment costs
• Very little training time required
• Easy compliance verification with IntelliFlash™
• Comfortable enough to wear all day long
• Automatic calibration
• Continuous gas readings
• When you start up the XL, it tests its sensor, battery situation, and the alarms.
• Built-in impact resistant cover
• Supports English, Spanish, French, Portuguese, and German
• IP 66 and EMC Directive 2004/108/EC compliant
• 2 year warranty

Testing Capabilities

1. Moderate danger low level alarm sounds

2. Danger is significant high level alarm

3. Short term exposure limit has been reached (STEL) maximum short period exposure

4. Time weighted average limit maximum amount of exposure for an eight hour day (TWA)

The XL Comes with:

• Clip
• Battery
• AC charger
• Test hose and cap for calibration
• CD and manual

Part Number: MCXLXWHMYNA

M5-XWAY-R-P-D-Y-N-00 GasAlertMicro 5 Detector %LEL, O2, H2S, CO, NH3 - NiMH Battery, Pump and Datalogging by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XWAYRPDYN00

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

BW Technologies Test Cap and Hose Replacement (1 foot or .3 meters)

For customization and maintenance, BW Technologies manufactures a variety of replacement parts and accessories. The product offerings are cost effective solutions that help to extend the life of the device and preserve the integrity of the equipment. The BW Technologies Test Cap and Hose Replacement contain a hose that is approximately 1 foot in length (or .3 meters) and a secure cap. To ensure compatibility, please consult your device's specification sheet.

Part Number: MCTC1

GasAlertMicroClip X3 Detector by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: CGBUMPB

• Single Gas monitor which detects one of the following gases: CO, H2S, O2, SO2, PH3, CL2, NH3, NO2, HCN, ETO, CLO2, O3, NO

• Multiple language and datalogging option
• Rugged, IP-66/67 highly water-resistant design
• Built-in concussion-proof boot
• Continuous LCD shows real-time gas concentration with backlight in low light (auto and on demand); in alarm (auto)
• LOW, HIGH, TWA and STEL alarms with adjustable set points
• Provides 95 dB tone and bright LED indication on alarm (typical)
• Internal vibrating alarm
• Compact (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and Lightweight (2.9 oz. / 82 g)
• 2-year battery life (typical) with replaceable 3V camera battery
• Simple auto-zero and calibration procedure
• Full function self-test of: sensor, battery, and circuitry integrity

How easy is the Gas Alert Extreme to use?

Alligator Clip

Highly Water Resistant

Durable

Calibration

BW Technologies Metallic Sintered Particulate Filter

Accessories made by BW Technologies are guaranteed to be reliable and effective. The company produces a wide variety of replacement parts and accessories to fit most needs for their products. The BW Technologies Metallic Sintered Particulate Filter is a durable sintered cylinder filter that prevents dirt and debris from damaging, entering, and clogging the pump. This filter is compatible with a range of BW Technologies products. Please consult your product specifications sheet to determine if this filter is compatible with your device.

Part Number: GAMFILTER

XT-SS-K1 Quad Sensor Screens (Kit of 10)

Part Number: HU-PG5

XT-XWHM-Y-NA GasAlertMax XT II 4 Gas Detector %LEL, O2, H2S, CO Yellow by BW Technologies

GasAlertMax XT II is the safest and most economical choice for multi-gas detection systems. Utilizing the most advanced technology on the market, the GasAlertMax accurately and reliably monitors up to four hazardous conditions, and offers a simple user friendly device for easy operation. Its standard safety features and compatibility with other instruments ensure that the gas detector is the best instrument for gas monitoring compliance.

GasAlertMax XT II specifications

The lightweight and portable unit is approximately 11.5 ounces, and features the latest technology allowing for a compact design. With an operational temperature range of -4 to 122 degrees Fahrenheit, the monitor is designed to function effectively in many harsh conditions. The cautionary yellow outer shell helps to ensure that the gas detector is carried with the user not left onsite. Additionally, the durable casing is resistant to water and features a built-in concussion proof boot.

Triple alarm system

The GasAlertMax XT II features a triple alarm system designed to alert users of potentially hazardous conditions. When the gas sensors detect specified levels of H2S, CO, O2, or combustible gases, the instrument will begin the triple alarm alert and notify users and those nearby. The device indicates these dangers with a vibrating alarm, an ultra bright visual alarm, and an audible alarm of over 95 decibels. The alarms are also designed to alert users of administrative needs such as battery replacement.

GasAlertMax XT II features

The GasAlertMax XT II has multi-language support features in English, French, Spanish, German, and Portuguese. The gas detector also has state of the art block detection with semi-conductor pressure sensor, and standard data and event logging. Accessories such as the belt holster, multi-unit cradle charger, and concussion proof boot are also available.

Upon activation, the unit will automatically test sensors, pumps, battery, and circuitry. For additional test and calibration, the GasAlertMax XT II is compatible with the MicroDock II automated test and calibration system and Fleet Manager II. Improving on its functionality, the unit is customizable. Users can change options for forced calibration and tests, safety locks, alarm setpoints, safe display mode, language choices, start-up message, and more.

The easy to read LCD screen displays continuous information about real-time gas concentrations and alarms. To maintain simplicity and ease of use, the GasAlertMax XT II also features a user and glove friendly one touch button for operation. The no-frills design has an added benefit of minimizing cost and user training. This simple, portable, and compact detector is the best instrument for confined spaces or potentially dangerous worksites.

Highest standards of reliability

The typical batter life ranges between 8 and 13 hours depending on the temperature. The durable and long lasting batteries can fully recharge in approximately 6 hours. The GasAlertMax XT II and its sensors feature a standard two year warranty. With safety and reliability as a top priority, BW Technologies has developed the multigas detector to utilize the most advanced technology on the market, while maintaining its simplicity and portability. When working in settings with possible gas exposure, users can be certain that the gas levels are being accurately and reliably monitored with the best technology available.

Part Number: XTXWHMYNA

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet.

Part Number: SRX10

GA24XT-H GasAlertClip Extreme 2 Year Single Gas Detector Hydrogen Sulfide (H2S) by BW Technologies

Ongoing product research enables BW Technologies to develop the most advanced workplace safety instruments in the industry. With incredible durability, accuracy, and reliability, the GasAlertClip Extreme is designed to monitor single gases in various settings and alert users of potentially unsafe situations. As technology advances, the standards of safety evolve. The GasAlertClip offers the very best of current technology at a low cost. This ensures that users and worksites can remain cost efficient with technology upgrades. Utilizing the most advanced technology, the highest safety standards, and cost efficiency, BW Technologies has created a single gas detector that is certain to meet the needs of the modern work environment.

Features

An accurate and reliable gas detection system is the most important safety instrument when working in mining, construction, fire and emergency services, confined spaces, and other potentially dangerous settings. The GasAlertClip Extreme is designed to withstand the harshest of environments and deliver consistently reliable alerts for up to 3 years. The durable outer casing protects the internal sensors from damage and renders the unit water resistant.

To ensure reliability and effectiveness, users can perform periodic self-tests of sensors, batteries, circuits, and alarms. The unit also performs a self-test upon activation and every 20 hours. Additionally, the battery is automatically tested every 2 hours to ensure the user can rely on the unit's warnings.

Maintenance free

The GasAlertClip Extreme also features maintenance free technology that is user friendly and easy to understand. The clip is available in both 2 year and 3 year versions. During the instrument's lifespan, the device will not require calibration tests, sensor replacement, batter replacement, or recharging of batteries. Users will find the GasAlertClip Extreme to be easy to use and with minimal training requirements. The various clips for different gases also feature color coded labels to distinguish between different gas detectors and LCD indicators. Users will also be able to manage alarm settings with ease and view information on the large LCD display such as the remaining life of the device and visual alarm bars.

Datalogging and alarms

Record keeping is a standard feature of the GasAlertClip Exteme. The clip will automatically record and transmit gas alarm events. This can provide valuable information to worksite managers assessing gas trends in various worksites. The alarm system includes visual alarms, vibrating alarms, and audible alarms of over 95 decibels. Workers with hearing or visual impairments or workers in loud settings will find the triple alarm system to be a valuable safety feature.

Compatibility and accessories

The GasAlertClip Extreme is compatible with a variety of test systems and accessories. The MicroDock II is a compatible automatic testing system. Accessories such as the concussion-proof boot, bulk packaging, and IR DataLink are also available. At 2.7 ounces and approximately 1 inch by 2 inches by 3 inches, the device is highly portable, lightweight, and comfortable to wear. The typical battery life is 2 or 3 years, depending on the version of the device, and the GasAlertClip Extreme is standard with a 2 to 3 year warranty from the date of activation.

Part Number: GA24XTH