BW Solo, BW Technologies Monitors

BW Technologies Replacement PCB Carbon Monoxide (CO) - Standard

Part Number: BWS-ML-PCB1

Gas detection for the new generation

 

Service and operation that is practical and easy Sensor options for specific job requirements Replacing the GasAlert Extreme and the ToxiPro®,the Honeywell BW™ Solo provides a range of new features as well as the benefits of the older detectors. The choice of the Honeywell BW™ Solo provides: Lower costs of ownership and operation Higher levels of safety Maximize compliance Connectivity for management

Compact Design

For any job, the Honeywell BW™ Solo offers both high levels of reliability and accuracy, as well as a compact size and lightweight design for use in any location.

Ease of Use

For any gas detection system to be effective, it must be easy to use in the field. The Honeywell BW™ Solo is designed to allow for quick change out of components, without the need for any tools. The door opens to change the sensor filters, and battery and sensor replacement is just as easy.

Full Range of Sensor Options

The Honeywell BW™ Solo can be used across all industries, including in the petrochemical, steel manufacturing, and in power plants. With the sensor options,this small, compact and easy to use detector is able to identify a full range of gases including hydrogen, nitrogen oxide, ozone, hydrogen cyanide, sulfur dioxide, and ammonia.

In addition, the sensor can be used for the detection of:

• Hydrogen sulfide
• Nitrogen dioxide
• Phosphine
• Chlorine dioxide
• Carbon monoxide
• Oxygen
• Chlorine
• Ethylene oxide

 

Introducing The 1-Series Sensor

The 1-Series sensor is a revolutionary, next-generation sensor that provides fast results in even the most challenging working environments. It offers a long duty cycle combined with proven reliability.

Design Benefits

The new design and shape of the 1-Series sensor provides a smaller, slimmer profile with a unique square design. With a height that is one-third of other sensors on the market, it offers rapid diffuses of gases for a fast, accurate reading.

Warranty and Sensor Life

In the past, sensors required constant downtime. To address this issue, the new Honeywell BW™ Solo provides up to five years of sensor life and a warranty of three years. Combining these two factors not only reduced downtime but helps to reduce the cost of operation of each sensor.

Reliability and Dependability in One

Designed and developed by the Honeywell company, City Technology, the 1-Series sensor is the latest in a long line of quality sensors developed in-house. City Technology was responsible for the development of the 40VW and the 40XLL oxygen sensors that are used in the popular Honeywell BW detection systems.

Used in All Environments

The 1-Series sensor is highly accurate and effective in all types of environments. As a handheld sensor, it offers accurate readings in temperature ranges from -40°C to 60°C. It can be used in hazardous environments and where humidity and transient pressure may be a factor.

Easy Sensor Replacement

Thanks to advanced design features, switching out the 1-Series sensor is simple. There is no need to expose the PCB (printed circuit board), making it easy to switch out sensors in the field and on the job.

Data Sharing Made Easy

For easy data sharing and optimal safety, the Honeywell BW™ Solo is fully compatible with the IntelliDox docking station system as well as the Honeywell SafetySuite Device Configurator software.

The IntelliDox Advantage

The use of the IntelliDox docking station system makes it easy to perform tests and transfer information. The detector is placed into the docking station, allowing for automatic transfer of data as well as the option to perform various actions.

The docking station provides the options to do a bump test, complete calibration, set bump reminders, change the set points, and to complete any firmware updates required.

IntelliDox can be used as a single dock, or it can be grouped with up to four other IntelliDox stations. Each independent docking station as a dedicated LCD screen, pump, and keypad, but shares calibration gas and power.

Windows-Based Software

To provide full compliance, the Honeywell SafetySuite Device Configurator software allows easy access to data, with the ability to export data from the detectors. The software makes it convenient and configure system alarm set points and to ensure all systems are up to date on the latest firmware version.

Moving to the Cloud

Honeywell offers a cloud-based monitoring option as well with the Honeywell BW™ Solo. The Honeywell SafetySuite Device Manager offers the following:

• Immediate access to data and alarms on all detectors across the system in real-time.
• Increased versatility in data reporting
• Full communication in the form of emails and text messages as to any alarms
• One central storage area for all reports, making audits and investigations much easier.
• Additional compliance features to enhance your program.

 

Your Smartphone can now control the Honeywell BW™ Solo for maximum convenience and fast response. The wireless feature in the Honeywell Connected Worker portfolio boosts compliance, safety, as well as worksite productivity.

The Advantages of A Mobile App

For anyone working across multiple job sites, using a smartphone to control the Honeywell BW™ Solo allows for maximum productivity. The Device Configurator app is ideal for configuration and deployment of the detector and is effective at distances of up to six meters away. Our systems use Bluetooth Low Energy (BLE), so they are not a drain on your phone.

The app is an effective way to check and review any bump and calibration data. This feature allows for a certificate to be emailed to stakeholders from the app to indicate the gas, the readings, and who performed the calibration. The app also makes it handy to upgrade firmware as needed.

The Bluetooth Advantage

Even if you don't have IntelliDoxdocking stations, BLE allows for sharing of data with the software on your desktop. This is a low-cost way to manage data across the fleet.

Safety Monitoring Made Easy

Loading the Safety Communicator app on smartphones allows for real-time reading of data without the need to dock the detector. When paired with the Honeywell apps, your smartphone becomes a monitoring system, providing immediate information on where workers are located and their safety.

Designed with Safety and Compliance in Mind

 

Single Button Control

No matter where you are working or if you are wearing safety equipment and gloves, operation of the Honeywell BW™ Solo is a one-button operation. The detector can be controlled through the software or with the push of a button, allowing for all alarms, set points and parameters to be easily controlled.

The button also allows for STEL or short-term exposure limit TWA time-weighted average results. Information on the highest concentration of the tested gas is also provided over the previous 24 hours.

Visible Safety

The IntelliFlash™ system allows for the green flashing light to show the detector ass been bump tested and is compliance with monitoring requirements. The noncompliance flash, which is a red blinking light, indicates the need for a battery replacement, a bump test, or if calibration is required. This is also used to signal a detected gas event.

Visual and Audible Alarms

With safety as a priority, the design of the Honeywell BW™ Solo includes red LED lights around the detector along with both ringing and vibrating alarms, ensuring the alarm is seen and heard in any working environment.

Practical and Convenient

 

Immediate Response

With the ability to assign the Honeywell BW™ Solo to workers or in specific locations, a gas event is easy to pinpoint.

Data and Recording

The Honeywell BW™ Solo is designed to allow peak readings of the highest gas level in the past 24 hours. These are not gas events or alarms, but the highest reading for early detection of possible issues.

Multiple Languages

As a global supplier of detection systems, the Honeywell BW™ Solo can be configured for readings in a number of different languages. These include English, Russian, French, Japanese, and Korean, among others.

Part Number: BWS-ML-Y

BW Technologies Replacement PCB Nitric Oxide (NO) - Standard

Part Number: BWS-N-PCB1

BWS-N-Y BW Solo Single-Gas Detector, (NO) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-N-Y

BW Technologies BW Solo 4 Series Sealing Kit - 10 pcs

Part Number: BWS-ORING-4S-K1

BW Technologies Replacement Label Phosphine (PH3)

Part Number: BWS-P-LABEL

BW Technologies Replacement PCB Phosphine (PH3) - Standard

Part Number: BWS-P-PCB1

BWS-R-B BW Solo Single-Gas Detector, Hydrogen (H2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-R-B

BW Technologies Replacement PCB Hydrogen (H2) - Standard

Part Number: BWS-R-PCB1

BWS-R-Y BW Solo Single-Gas Detector, Hydrogen (H2) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-R-Y

BWS-S-B BW Solo Single-Gas Detector, (SO2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-S-B

BW Technologies Replacement PCB Sulfur Dioxide (SO2) - Standard

Part Number: BWS-S-PCB1

BW Technologies BW Solo Sensor Fixer Screw Kit - 25 pcs

Part Number: BWS-SCREW-K1

BWS-V-B BW Solo Single-Gas Detector, (ClO2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-V-B

BW Technologies Replacement Label Chlorine Dioxide (ClO2)

Part Number: BWS-V-LABEL

BW Technologies Replacement PCB Chlorine Dioxide (ClO2) - Standard

Part Number: BWS-V-PCB1

Cutting Edge portable detector for single-gas.

 

Offering a full range of sensor options, easy operation, and convenient service. The next-generation of gas detector to replace the ToxiPro® and the GasAlert Extreme, the Honeywell BW™ Solo offers all the standard options and additional features to: Protect workers Ensure wireless and connected options Increase compliance with ease of use Lower the cost of maintenance and ownership

 

Optimized for hazardous environments

Lightweight and streamlined, the small size of the Honeywell BW™ Solo makes it ideal for workers to use in any location.

Simplification of single-gas detection combined with low cost and long life

Replacing the sensor, a sensor filter, or a battery is easy with the Honeywell BW™ Solo. Just pop open the door on the detector and complete the necessary change, all without the need for special tools or equipment.

Full sensor range for gases of all types

In any type of industry, including production and manufacturing, petrochemical, or in power plants, the Honeywell BW™ Solo offers a sensor solution. This includes the ability to test for:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Phosphine (PH₃)
• Oxygen (O₂)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Nitrogen oxide (NO)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)

 

Featuring the 1-Series sensor, this single-gas detector has higher accuracy, lower cost of ownership, and increased safety for workers.

For commonly monitored single gases, the 1-Series sensor provides fast response, a long life cycle, and reliable performance you can count on.

Most fast response gas types available.

Currently, the 1-Series sensor provides rapid responses for the testing of CO, O₂, and H₂S, with increased capacity on the way. The sensor itself has a square design, which allows for more rapid gas diffusion and faster readings. The sensor is also about a third the height of other sensors, allowing a lighter and more streamlined detector design.

Exceptional warranty and sensor life.

Offering a three-year warranty and up to 5-years of sensor life with typical gas exposure, the 1-Series sensor has a low cost of ownership. In addition, decreased downtime and long sensor life make them a practical addition to your fleet.

The 1-Series sensor is developed by City Technology.

City Technology is a Honeywell company and developed both the 40VX and the 40xLL oxygen sensors used in the Honeywell BW detector. With forty plus years of sensor development expertise, this company is known for reliable sensors and quality products.

No more false alarm issues.

The 1-Series sensor provides highly accurate readings in the most demanding types of environments. This includes temperatures of -40°C to 60°C with or without factors such as transient pressure and high humidity levels.

Fast switch-out of the sensor.

Replacing a sensor has never been easier or safer. Simply take out the old sensor and put in the new, no need to expose the printed circuit board or internal components.

Offering the benefit and time saving of centralized data and automation for fleet management.

The Honeywell BW™ Solo is designed to be used with the IntelliDox and the Honeywell SafetySuite Device Configurator software for maximum flexibility and versatility.

The IntelliDox advantage

The IntelliDox dock allows the Honeywell BW™ Solo to simply be put in place for automated transfer of data from test results and the completion of selected actions. These actions can include calibration, bump testing, setting bump reminders, changing alarm set points, or even completing a firmware update.  Through fleet management software and a USB or Ethernet connection, peak readings, alarms, and other data are automatically transferred to a computer.

Need to have options and capacity? The IntelliDox can be grouped up to five docks, each with its own pump, keypad and LCD screen. This allows independent operation while sharing both calibration gas as well as power.

Centralize compliance monitoring with Device Configurator

Device Configurator is Windows-based, which allows this software to operate on any Windows computer. It will enable the user to view, update firmware, set alarm points, and so much more. Boost productivity, compliance, and safety across the organization.

Increased access with cloud-based software

For a greater range of features and increased access to data, choose the Honeywell SafetySuite Device Manager cloud-based subscription. This provides you with:

• An easy to use and see dashboard to immediately verify compliance or know when and where alarms occur.
• Reporting options for your needs.
• Centralized storage of data needed for investigations and audits.
• Real-time notification of alarms by text or email.
• Enhanced compliance features.

 

Increase ease of operation through smartphone detector management. The Honeywell BW™ Solo offers a wireless option that is compatible with the Honeywell Connected Worker portfolio for increased productivity, safety, and compliance.

An app for all tasks.

The Device Configurator app can be used once the Honeywell BW™ Solo is paired with the smartphone. The app provides full control of the detector, including firmware upgrades and detector setup and configuration. Using BLE (Bluetooth Low Energy), these actions can be done at up to 6 meters away, including data verification.

No docking station required.

For any company, the ability to wirelessly share the detector's gas data from the Honeywell BW™ Solo through to the computer using BLE makes it easy to manage the fleet, all without the need for docking stations.

Enhancing worker safety from remote locations.

To see data without the need for the Honeywell BW™ Solo to be docked is critical for worker safety. The use of the Honeywell Safety Communicator app sends data to the Honeywell monitoring software, which allows access from your internet-connected device in real-time from any location.

Compliance you can trust for workers and safety managers.

 

Operation in any location

The Honeywell BW™ Solo can be controlled by the Honeywell SafetySuite Device Configurator software, or it can be manually controlled with one-button operation. This is easy to do even when wearing gloves, which leads to increased use and greater compliance. It also provides measurements for time-weighted average (TWA), short-term exposure limits (STEL), and 24-hour high gas concentration readings.

Options to check for compliance

The Honeywell BW™ Solo allows the option to see the IntelliFlash™ to show the detector is in compliance. Flashing green lights are positive for compliance, showing the detector has been bump tested and is correctly monitoring.

It is also possible to check for noncompliance. This setting will flash red if the detector requires a bump test, needs calibration, has experienced a gas event, or if the battery is low.

Having both options to choose makes it more effective for your specific workplace and procedures.

Visual and auditory alarms

To clearly display a gas event, the Honeywell BW™ Solo will vibrate as well as produce a loud, audible alarm. The detector also has a ring of LED red lights, a clear visual of an alarm in noisy spaces.

Designed to be practical and effective.

 

Tracking detectors and workers

Assigning detector to specific locations or workers makes it easy to locate where the detector is and who is using it in a gas event.

Peak readings over a rolling 24-hours

To determine the highest gas readings over a rolling 24-hour period provides for early detection of problems before a gas event occurs. This helps to prevent alarms and keeps the workplace safer.

Language options in the display

The easy-to-read display screen can be configured to provide information in major languages for use in any location around the world.

Part Number: BWS-V-Y

BWS-XL-B BW Solo Single-Gas Detector, (O2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-XL-B

BW Technologies Replacement PCB Oxygen (O2) - Standard

Part Number: BWS-XL-PCB1

BWS-Z-B BW Solo Single-Gas Detector, (HCN) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-Z-B

BW Technologies Replacement PCB Hydrogen Cyanide (HCN) - Standard

Part Number: BWS-Z-PCB1

BW Technologies Replacement PCB Ammonia (NH3) - Wireless

Part Number: BWS1-A-PCB1

BW Technologies Replacement PCB Carbon Dioxide (CO2) - Wireless

Part Number: BWS1-BL-PCB1

BWS1-C-B BW Solo Single-Gas Detector, (Cl2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-C-B