BW Solo, BW Technologies Monitors

BWS1-E-B BW Solo Single-Gas Detector, (ETO) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-E-B

BW Technologies Replacement Hydrogen Fluoride (HF) sensor (4-Series)

Part Number: SR-HF-4S

BW Technologies BW Solo Replacement Back Shell - Black

Part Number: BWS-BC1B

Optimal Single-Gas Detection With Next-Generation Technology

 

Sensor options combined with a system that is easy to service and to operate in the field. The next-generation of single-gas detection is here with the Honeywell BW™ Solo. Replacing the GasAlert Extreme and the ToxiPro®this sensor offers: Increased worker safety Enhanced compliance New levels of protection Lower cost of purchase and operation

Practical to Use

Small and lightweight, the Honeywell BW™ Solo is convenient, functional, and easy to use in any work environment.

Low Cost, Long Life

The Honeywell BW™ Solo design allows for easy replacement of sensor filters, batteries, and sensors. Just pop off the panel door – no need for special tools.

Common and Exotic Gas Sensors

In power and petrochemical plants, as well as in manufacturing or other industrial environments, the Honeywell BW™ Solo offers the right sensor for the job. Both common and exotic gas sensors are included with the detector, including:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

Maximizing Safety With The 1-Series Sensor

The Honeywell BW™ Solo is the first portable, single-gas detector to come with the 1-Series sensor. This is a proven performer in even the most difficult conditions, and with next-generation technology, the 1-Series sensor is the right choice.

Faster Reading and Response

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂, with additional sensors for other gases soon available. It has a square design, about one-third of the size of other sensors, making it both effective as well as streamlined.

Exceptional Life

With typical exposure to gas, the 1-Series sensor can last up to five years without any need for replacement and downtime for the equipment. It also offers a three-year warranty, providing peace of mind with the purchase.

A Honeywell Company Product

The 1-Series sensor was designed and developed by the Honeywell company, City Technology. With over four decades of sensor manufacturing experience, they are also the company responsible for the 40xLL and the 40XV oxygen sensors used in the Honeywell BW.

Reliable Performance

Tired of nuisance alarms and unreliable readings? These are the thing of the past with the Honeywell BW™ Solo, which is proven in harsh, humid, and transient pressure environments, as well as in temperatures from -40°C to 60°C.

Keep Sensor Downtime Low

Need to change out the sensor? This is a simple, easy, and very quick task - just remove the old sensor and drop in the new, no need to expose the sensor printed circuit board or internal component.

Streamline Your Fleet and Centralize Data Management

Designed to be used with different technologies, the Honeywell BW™ Solo can be used with an IntelliDox docking statio and the Honeywell SafetySuite Device Configurator for maximum efficiency as well as fleet management.

The IntelliDox Advantage

The IntelliDox dock is designed to hold the detector and automatically transfer the data and test results. It can also be configured to perform any desired actions automatically, increasing efficiency. These actions include:

• Bump tests and reminders
• Calibration
• Modification of set points
• Firmware updates

 

Data about peak readings and alarms are transferred to a computer from the IntelliDox by Ethernet or USB connection. Grouping up to five IntelliDox still allows for individual use, while each dock has its own LCD screen, keypad, and pump. Grouped IntelliDox share calibration gas and power for ease of operation.

Centralize Compliance Made Simple

Utilizing Windows-based software, data can be exported and viewed on any Windows computer. The computer can also be used to configure the detector, upgrade firmware, and ensure full compliance across the fleet.

Utilize the Power of the Cloud

Choosing to subscribe to Honeywell SafetySuite Device Manager cloud-based system allows you to:

• Access information from any internet-connected device
• Receive immediate alarm notification via email or text
• Monitor the entire system through easy to navigate dashboards, even with multiple sites
• Obtain the reports you need
• Boost compliance across all workplaces

 

Managing The Detector From Your Smartphone The Honeywell Connected Worker portfolio integrates the Honeywell BW™ Solo, allowing wireless control of the detection for increased compliance, safety, and worker productivity.

 

The Power of the Mobile App

The Device Configurator app puts the control of the Honeywell BW™ Solo right on your smartphone.

The app can be used in the configuration, alarm setup, firmware updates, and the control of the detector from up to 6 meters using Bluetooth Low Energy (BLE) technology.

The app allows you to review bump and calibration data, to see the last gas tested and who ran the test, as well as to see the actual readings. This information can be placed on a certificate and emailed to the necessary stakeholders, all from the app.

Send Data to a Desktop Without IntelliDox

The use of BLE allows the wireless transfer of data from the Honeywell BW™ Solo to a desktop without the need for a docking station. This is an ideal option for a larger fleet, eliminating the need for docking stations.

Worker Safety is First

The Honeywell Safety Communicator app allows access to vital information without the need for docking. This provides gas readings and other vital data to monitoring software in real-time. Safety and fleet managers can access this information from any internet-connected device from any remote location.

Working Towards Full Safety and Compliance Across the Workplace

 

Easy Field Operation

The Honeywell BW™ Solo is designed to work in all types of environments. This includes one-button operation of the detector, eliminating the need to remove safety gloves to complete the test. The Honeywell SafetySuite Device Configurator can also be used to control the detector and set all parameters. It also provides data on short-exposure limit (STEL) and time-weighted average (TWA) as well as the peak gas concentration in the last 24 hours.

Visual Safety or Non-Compliance Confirmation

Are you tired of trying to see if a detector is in compliance or not in compliance? The Honeywell BW™ Solo makes this easy with flashing green lights to indicate bump testing and correct monitoring.

Red flashing lights means the detector is not in compliance, which could indicate a battery replacement is needed or the system needs calibration, a bump test, or these has been a gas event.

Auditory Alarms

The load and audible alarm and vibration of the Honeywell BW™ Solo are coupled with a ring of red LEDs around the detector, making it easy to see if an alarm has been trigged in any environment.

Simplicity and Sophistication for Use and Configuration

 

Know your worker's location

The Honeywell BW™ Solo can be assigned to a specific worker or a location for immediate information on the use of the detector in the event of a gas event.

Peak Reading Data For A Rolling 24-Hours

Peak readings of specific gases that may not reach the alarm threshold are still important to record. The Honeywell BW™ Solo offers a 24-hour rolling peak reading, allowing for early detection of problem areas.

Multiple Language Display

The Honeywell BW™ Solo can be configured to display gas readings in real-time in major languages, including English, Spanish, French, Russian, Korean, Japanese, and many more.

Part Number: BWS-XL-Y

BWS-HC-Y BW Solo Single-Gas Detector, (HCL) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-HC-Y

SR-P04 Replacement Phosphine (PH3) Sensor

For the world s finest gas detection systems, BW Technologies is a global leader. The company produces a wide range of gas detection solutions that are capable of meeting the many unique needs of its customers. In addition to its gas detection products, the company produces accessories, sensors, and replacement parts. The replacement phosphine sensor is compatible with several BW Technologies gas detection models. To ensure compatibility, please consult the product s specification sheet.

BWS-A-B BW Solo Single-Gas Detector, (NH3) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A-B

BW Technologies Replacement Ammonia (NH3) Sensor, Extended Range

Part Number: SRA204

BW Technologies Replacement Label Ammonia (NH3)

Part Number: BWS-A-LABEL

BW Technologies Replacement Label Sulfur Dioxide (SO2)

Part Number: BWS-S-LABEL

BW Technologies Replacement Label Nitric Oxide (NO)

Part Number: BWS-N-LABEL

BWS1-G-Y BW Solo Single-Gas Detector, Ozone (O3) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-G-Y

BW Technologies Single Gas NO (50 ppm)

Part Number: CG2N5034

BWS1-BL-B BW Solo Single-Gas Detector, (CO2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms — choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-BL-B

BWS1-D-B BW Solo Single-Gas Detector, (NO2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-D-B

BWS1-M2-Y BW Solo Single-Gas Detector, (CO-H2 resistant) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-M2-Y

BWS1-S-B BW Solo Single-Gas Detector, (SO2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-S-B

BWS1-V-Y BW Solo Single-Gas Detector, (ClO2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-V-Y

BWS1-Z-B BW Solo Single-Gas Detector, (HCN) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-Z-B

PS-RS04 Replacement Sulfur Dioxide (SO2) Sensor

BW Technologies is a worldwide leader in gas detection solutions. The company produces a wide range of products, replacement parts, and accessories. The replacement plug-in sensors are convenient, accurate, and reliable. The replacement sulfur dioxide sensor conveniently plugs into the gas detection device. Only a screwdriver is needed for full installation. This sensor is suitable for a variety of BW Technologies gas detection devices. To determine compatibility, please consult the product specifications sheet.

SR-G04 Replacement Ozone Sensor

Regular maintenance and inspection is critical to ensuring the long life of gas detection systems. Certain parts of gas detection instruments need to be regularly cleaned or replaced. Critical to maintaining the integrity of an instrument is the appropriate replacement of gas sensors. BW Technologies produces a variety of gas sensors to meet the gas detection needs of their clients. The BW Technologies replacement ozone sensor is a convenient plug in sensor that can be easily installed with minimal tools.

BWS1-HL-B BW Solo Single-Gas Detector, (H2S) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-HL-B

Making single-gas detection portable and effective with next-generation capabilities.

 

Easy to service, easy to operate, and all the sensor options required. As a replacement for the GasAlert Extreme and the ToxiPro®, the Honeywell BW™ Solo provides all of the features of these top gas detectors as well as: Longer life for greater return on investment Increased compliance Making it easy for workers to be connected Boosting safety and protection on the job

 

Manageable and Lightweight

Featuring a low, lightweight profile and a practical design, the Honeywell BW™ Solo is ideal in any working environment.

Making simple detector service a priority

To avoid having to disassemble the detector to replace a sensor filter, sensor, or battery, the Honeywell BW™ Solo offers a simple service solution. Just pop open the appropriate door on the detector for easy replacement.

Beyond hydrogen, oxygen, and carbon monoxide detection

In any workplace, including steel manufacturing and power plants, the Honeywell BW™ Solo offers a range of sensors including:

• Ammonia (NH₃)
• Ozone (O₃)
• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

Increasing worker safety with the 1-Series sensor, the first in a single-gas detector.

As a next-generation detector, the Honeywell BW™ Solo uses the 1-Series sensor for fast response, accuracy, reliability, and a long life in any type of environment.

Adding to the gas types CO, H₂S, and O₂

Currently, the 1-Series sensor provides fast response for CO, H₂S, and O₂, with additional gas types coming onboard shortly. The design is smaller, about a third of the height of traditional sensors, and features a compact, square design for rapid gas diffusion and response times.

Extraordinary life and warranty.

With the 1-Series sensor, expect up to 5 years of sensor life with typical gas detection use, and the benefits of a 3-year warranty. With limited downtime and extended duty cycle, you have peace of mind in knowing this reduces the cost of ownership.

Developed by City Technologies – a Honeywell company.

The 1-Series sensor is developed by City Technologies, the Honeywell company responsible for the development of the 40XV and the 40xLL oxygen sensors used in the Honeywell BW detector. In addition to 40 years of experience, they provide quality and exacting standards to their sensor development.

Accuracy and performance.

Nuisance alarms creating problems? Adding the 1-Series sensor eliminates these false alarms while providing accurate readings in environments with transient pressure, high humidity, and temperatures from -40°C to 60°C.

Sensor switch-out without a hassle.

The design of the 1-Series sensor means there is no need to open the housing to expose the printed circuit board or interior circuitry to replace a sensor. It is as simple as taking out the old and dropping in the new.

Step up to automated fleet management and centralized data.

Combining the Honeywell BW™ Solo with the IntelliDox and the Honeywell SafetySuite Device Configurator software allows for optimal management of data and detectors.

The IntelliDox advantage for automation, configuration, and data centralization.

The IntelliDox dock allows the detector to be placed in position and automatically transfer data and complete requested actions. These actions include setting bump reminders, doing bump tests, calibrating the detector, or change set points. Connecting to a USB or Ethernet connection allows fleet management software to automatically transfer data to a computer for centralization.

The IntelliDox can also be grouped. Each continues to function as an independent system with an LCD, keypad, and pump, but shares both power and gas for calibration.

The Device Configurator software advantage.

Windows-based, the Device Configurator software allows for easy access to data, configuration of set points for alarms, fleet firmware updates, and other actions that improve productivity, safety, and compliance.

Immediate notification through the cloud.

Using the subscription service for the Honeywell SafetySuite Device Manager in the cloud allows your company to:

• Monitor all gas detectors in real-time through one easy to use dashboard. This includes multiple detectors across multiple sites.
• Customize reports
• Provide easy, centralized data for audits, investigations, and review
• Real-time notification of alarms via text or email
• Added compliance features

 

Further simplification and convenience with smartphone apps for detector management. Wireless control of the detector is possible and easy through the Connected Workers portfolio and your smartphone.

The advantage of using the mobile app.

The Honeywell BW™ Solo can be paired or linked with any smartphone, allowing the Device Configurator app to be a control for the detector. This allows the user to configure, set up the detector, determine alarm set points, and update firmware using Bluetooth Low Energy (BLE) at a distance of up to 6 meters away.

The app can be used to read the last calibration or bump data, when it occurred, and who it was completed by. It can also provide a certificate that can be mailed to required stakeholders for requirements for launch.

Eliminates the needs for docking stations.

For fleets, using a wireless option with the Honeywell BW™ Solo eliminates the need to have docking stations to transmit data. Using BLE, the app can read information and transfer it to the desktop software for centralized data management and reporting.

Increasing worker safety monitoring for remote safety managers.

The Safety Communicator app from Honeywell allows the safety manager or designated managers to see vital data without the need for docking. When the app and detector are paired through a smartphone, data is transferred in real-time to the monitoring software, where it is accessible by any internet-connected device.

Combining worker safety and increased compliance.

 

Practical one-button control and operation.

Using the Honeywell BW™ Solo is easy in any environment, even when wearing gloves. A single button is used for manual operation of the detector, or it can be configured with the Honeywell SafetySuite Device Configurator software. Both options allow for latching alarms, configuring set points, and adjusting parameters. It provides measurements for STEL (short-term exposure levels), TWA (time-weighted average) as well as peak gas readings over 24 hours.

Options for compliance or out of compliance determination

For at a glance confirmation of the detector being in or out of compliance, the IntelliFlash™ system allows for either option. A green flashing light signals the detector is correctly monitoring and has had a bump test.

With the noncompliance flash activated, a red light indicates the need for a battery replacement, calibration, bump test, or if there has been a detected gas event.

Combining auditory and visual alarms

In addition to a loud, distinct alarm with the Honeywell BW™ Solo, there is also the additional red LED lights around the display. The detector also vibrates, making it easy to see and hear in any location.

Simple to set up and to operate.

 

Know locations

By assigning the detector to an employee or a location, gas events are easy to pinpoint.

The peak 24-hour rolling reading advantage

Peak gas levels that are below the alarm settings are recorded with the Honeywell BW™ Solo. These are set on a rolling 24-hour basis, allowing early detection of potential safety issues.

Language options around the world

For international use, the gas readings on the detector can be displayed in all major languages.

Part Number: BWS-C-Y

BWS1-ML-B BW Solo Single-Gas Detector, (CO) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-ML-B