BW Solo, BW Technologies Monitors

BWS-A-B BW Solo Single-Gas Detector, (NH3) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A-B

PS-RH04S Replacement Hydrogen Sulfide (H2S) Sensor

BW Technologies provides a full range of gas detection systems, gas sensors, replacement parts, and accessories. The sensors produced by BW Technologies are some of the most accurate and reliable sensors on the market. The easy plug-in sensors are available with single or multigas detection capabilities. This specific product is a hydrogen sulfide plug-in replacement sensor and detects within the range of 0-500 ppm. It is for use with BW Technologies brand of gas detection instruments.

Gas detection for the new generation

 

Service and operation that is practical and easy Sensor options for specific job requirements Replacing the GasAlert Extreme and the ToxiPro®,the Honeywell BW™ Solo provides a range of new features as well as the benefits of the older detectors. The choice of the Honeywell BW™ Solo provides: Lower costs of ownership and operation Higher levels of safety Maximize compliance Connectivity for management

Compact Design

For any job, the Honeywell BW™ Solo offers both high levels of reliability and accuracy, as well as a compact size and lightweight design for use in any location.

Ease of Use

For any gas detection system to be effective, it must be easy to use in the field. The Honeywell BW™ Solo is designed to allow for quick change out of components, without the need for any tools. The door opens to change the sensor filters, and battery and sensor replacement is just as easy.

Full Range of Sensor Options

The Honeywell BW™ Solo can be used across all industries, including in the petrochemical, steel manufacturing, and in power plants. With the sensor options,this small, compact and easy to use detector is able to identify a full range of gases including hydrogen, nitrogen oxide, ozone, hydrogen cyanide, sulfur dioxide, and ammonia.

In addition, the sensor can be used for the detection of:

• Hydrogen sulfide
• Nitrogen dioxide
• Phosphine
• Chlorine dioxide
• Carbon monoxide
• Oxygen
• Chlorine
• Ethylene oxide

 

Introducing The 1-Series Sensor

The 1-Series sensor is a revolutionary, next-generation sensor that provides fast results in even the most challenging working environments. It offers a long duty cycle combined with proven reliability.

Design Benefits

The new design and shape of the 1-Series sensor provides a smaller, slimmer profile with a unique square design. With a height that is one-third of other sensors on the market, it offers rapid diffuses of gases for a fast, accurate reading.

Warranty and Sensor Life

In the past, sensors required constant downtime. To address this issue, the new Honeywell BW™ Solo provides up to five years of sensor life and a warranty of three years. Combining these two factors not only reduced downtime but helps to reduce the cost of operation of each sensor.

Reliability and Dependability in One

Designed and developed by the Honeywell company, City Technology, the 1-Series sensor is the latest in a long line of quality sensors developed in-house. City Technology was responsible for the development of the 40VW and the 40XLL oxygen sensors that are used in the popular Honeywell BW detection systems.

Used in All Environments

The 1-Series sensor is highly accurate and effective in all types of environments. As a handheld sensor, it offers accurate readings in temperature ranges from -40°C to 60°C. It can be used in hazardous environments and where humidity and transient pressure may be a factor.

Easy Sensor Replacement

Thanks to advanced design features, switching out the 1-Series sensor is simple. There is no need to expose the PCB (printed circuit board), making it easy to switch out sensors in the field and on the job.

Data Sharing Made Easy

For easy data sharing and optimal safety, the Honeywell BW™ Solo is fully compatible with the IntelliDox docking station system as well as the Honeywell SafetySuite Device Configurator software.

The IntelliDox Advantage

The use of the IntelliDox docking station system makes it easy to perform tests and transfer information. The detector is placed into the docking station, allowing for automatic transfer of data as well as the option to perform various actions.

The docking station provides the options to do a bump test, complete calibration, set bump reminders, change the set points, and to complete any firmware updates required.

IntelliDox can be used as a single dock, or it can be grouped with up to four other IntelliDox stations. Each independent docking station as a dedicated LCD screen, pump, and keypad, but shares calibration gas and power.

Windows-Based Software

To provide full compliance, the Honeywell SafetySuite Device Configurator software allows easy access to data, with the ability to export data from the detectors. The software makes it convenient and configure system alarm set points and to ensure all systems are up to date on the latest firmware version.

Moving to the Cloud

Honeywell offers a cloud-based monitoring option as well with the Honeywell BW™ Solo. The Honeywell SafetySuite Device Manager offers the following:

• Immediate access to data and alarms on all detectors across the system in real-time.
• Increased versatility in data reporting
• Full communication in the form of emails and text messages as to any alarms
• One central storage area for all reports, making audits and investigations much easier.
• Additional compliance features to enhance your program.

 

Your Smartphone can now control the Honeywell BW™ Solo for maximum convenience and fast response. The wireless feature in the Honeywell Connected Worker portfolio boosts compliance, safety, as well as worksite productivity.

The Advantages of A Mobile App

For anyone working across multiple job sites, using a smartphone to control the Honeywell BW™ Solo allows for maximum productivity. The Device Configurator app is ideal for configuration and deployment of the detector and is effective at distances of up to six meters away. Our systems use Bluetooth Low Energy (BLE), so they are not a drain on your phone.

The app is an effective way to check and review any bump and calibration data. This feature allows for a certificate to be emailed to stakeholders from the app to indicate the gas, the readings, and who performed the calibration. The app also makes it handy to upgrade firmware as needed.

The Bluetooth Advantage

Even if you don't have IntelliDoxdocking stations, BLE allows for sharing of data with the software on your desktop. This is a low-cost way to manage data across the fleet.

Safety Monitoring Made Easy

Loading the Safety Communicator app on smartphones allows for real-time reading of data without the need to dock the detector. When paired with the Honeywell apps, your smartphone becomes a monitoring system, providing immediate information on where workers are located and their safety.

Designed with Safety and Compliance in Mind

 

Single Button Control

No matter where you are working or if you are wearing safety equipment and gloves, operation of the Honeywell BW™ Solo is a one-button operation. The detector can be controlled through the software or with the push of a button, allowing for all alarms, set points and parameters to be easily controlled.

The button also allows for STEL or short-term exposure limit TWA time-weighted average results. Information on the highest concentration of the tested gas is also provided over the previous 24 hours.

Visible Safety

The IntelliFlash™ system allows for the green flashing light to show the detector ass been bump tested and is compliance with monitoring requirements. The noncompliance flash, which is a red blinking light, indicates the need for a battery replacement, a bump test, or if calibration is required. This is also used to signal a detected gas event.

Visual and Audible Alarms

With safety as a priority, the design of the Honeywell BW™ Solo includes red LED lights around the detector along with both ringing and vibrating alarms, ensuring the alarm is seen and heard in any working environment.

Practical and Convenient

 

Immediate Response

With the ability to assign the Honeywell BW™ Solo to workers or in specific locations, a gas event is easy to pinpoint.

Data and Recording

The Honeywell BW™ Solo is designed to allow peak readings of the highest gas level in the past 24 hours. These are not gas events or alarms, but the highest reading for early detection of possible issues.

Multiple Languages

As a global supplier of detection systems, the Honeywell BW™ Solo can be configured for readings in a number of different languages. These include English, Russian, French, Japanese, and Korean, among others.

Part Number: BWS-ML-Y

BW Technologies Replacement Ammonia (NH3) Sensor, Extended Range

Part Number: SRA204

BWS-E-Y BW Solo Single-Gas Detector, (ETO) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-E-Y

BWS-G-B BW Solo Single-Gas Detector, Ozone (O3) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-G-B

BWS-D-Y BW Solo Single-Gas Detector, (NO2) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-D-Y

A New Generation of Portable Gas Detection

 

A full selection of sensor options in an easy to service and operate detector. As a replacement for the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the next-generation in detectors for safety, compliance, and productivity. Adding this solution to your fleet will provide: Longer use cycles for lower cost Allow workers to connect Increase safety in any environment Increase compliance with an easy to use detector

 

Durable and Compact

Small and streamlined, the Honeywell BW™ Solo is easy to use, helping to ensure compliance in any workplace.

Low Cost, Long Life, Easy Service

Thanks to a practical design, the Honeywell BW™ Solo is easy to work on in the field. Removing a door on the front is all that is needed to change out sensor filters, replace the battery, or change the sensor – without the need for any tools.

Range of Sensor Options

No matter where you may be working, the Honeywell BW™ Solo offers the sensor you need to measure both typical or less common types of hazards. Use this sensor for the detection of:

• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

It also provides detection for common gases such as Carbon monoxide (CO), Oxygen (O₂), Hydrogen (H₂) and Chlorine (Cl₂).

Getting To Know The 1-Series Sensor

Are you interested in increasing accuracy and lowering the cost of detection while also increasing worker safety? If you are, the 1-Series sensor offers reliability, long duty and life cycle, and a fast response for readings in any type of environment.

Detecting CO, O₂, and H₂S

The square design of the 1-Series sensor allows for fast diffusion of the gas in the sensor, all with a small, square design. More compact than other detectors, it is less than half the size of other sensors on the market.

3-Year Warranty with a 5-Year Sensor Life

Based on typical use, the 1-Series sensor offers up to a 5-year sensor life and the benefit of a full three-year warranty. This helps to extend the duty cycle of the sensors, reducing the cost of ownership while keeping equipment up and running.

Experienced Sensor Development by Honeywell

The 1-Series is designed and manufactured by City Technologies, which is a Honeywell company. City Technologies has over 4 decades of developing top sensors, including the 40xLL long-life and the 40XV oxygen sensors for the Honeywell BW.

Accurate Readings without Unnecessary Alarms

In temperatures from -40°C to 60°C, the 1-Series sensor provides a reliable source of highly accurate readings. It is also an effective detector in environments where transient pressure or high humidity is a problem for other detectors.

Simple Sensor Replacement

The design of the sensor eliminates the need to access the PCB (Printed Circuit Board) during sensor replacement. Just pop it open and switch out the sensor, all without the need for special tools.

Efficient Fleet Management and Centralized Data Collection

As a system, the use of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator make it easy to manage data from the entire fleet. At the same time, this also allows for greater safety, productivity, and compliance with industry standards.

Automate RecordKeeping, Testing, and Configuration

The use of IntelliDox technology and docking stations makes it easy to automatically transfer and store results from testing as well as complete specific tests and actions. The detector is placed in to dock to:

• Configure and change set points
• Bump test
• Set bump reminders
• Update firmware
• Calibrate the detector

 

With the use of fleet management software, all data, alarms, and peak readings are easily transferred to a company through a USB or Ethernet connection.

The IntelliDox can be used alone or combined with four other docks into a group. Each dock offers its own control of detectors, as well as a state-of-the-art LCD screen, pump, and individual keypad. Grouped docks share power and calibration gas for efficiency and operational ease.

Adding Device Configurator

The Device Configurator uses Windows-based software, allowing easy data transfer, deployment of firmware updates across the fleet, exporting of data as well as configuration of alarm set points from one central location.

Move to the Cloud

For enhanced control and management for the fleet, upgrade to the Honeywell SafetySuite Device Configurator manager that uses the cloud. This upgrade allows you to:

• See all detectors on one screen for immediate identification of alarms, compliance, and gas events.
• Automated text and email messages of any alarms across the system
• Multiple reporting options
• Centralize report storage and retrieval for audits or as needed
• Increased compliance across multiple sites

 

Make compliance easy through smartphone management of the detector. One easy way to boost compliance, safety, and efficiency is to choose the wireless version of the Honeywell BW™ Solo that integrates with the Honeywell Connected Worker portfolio.

 

The Advantages of the Mobile App

The Device Configurator is designed to work on a smartphone that has been paired with the HoneywellBW™ Solo. The app allows for configuration of the detector, development of set points and alarms, and even firmware updates using BLE or Bluetooth Low Energy technology.

Is efficiency and compliance important? If so, the mobile app can be used to check data, see readings, and even find out who performed the calibration of the detector as well as information about the gas reading. This is automatically entered into the system, and a certificate can be mailed to those who require a copy.

No Docking Station Needed

The choice to use BLE technology eliminates the need for an IntelliDox. The data can be transferred wirelessly to a desktop computer for easy fleet management.

Monitoring Made Simple

Adding the Safety Communicator app to the smartphone allows for immediate transfer of data without the need for docking. The data is sent to Honeywell monitoring software, and it is available to managers in real-time through the app. For managers, this makes monitoring worker location and safety an efficient process.

Ensure Compliance Through Ease of Use

 

The Push of a Button

The easier any technology is to use in the field, the greater the levels of compliance. The Honeywell BW™ Solo is easy to operate with the push of a button, even when wearing gloves or protective gear. The single button or the Honeywell SafetySuite Device Configurator software makes it simple to set all parameters, alarms, and set points, as well as read short-term exposure limit, time-weighted average, and highest concentrations over the last 24 hours.

Visible Safety and Compliance

A quick glance is all it takes to ensure the Honeywell BW™ Solo is compliant. The IntelliFlash™ can be activated to flash green when the detector is monitoring accurately and has been bump tested.

Non-compliance results in a blinking red light, letting you know the detector has a low battery, there has been a gas event, or the system needs calibration or a bump test.

Getting Noticed

The use of flashing lights, audible alarms, and vibration makes it easy to notice if there is an issue or any danger in any type of environment.

Designed to be Practical

 

Easy Monitoring

The detectors can be linked to workers or locations, making it easy to find the problem area in a gas event.

Rolling 24-Hour Readings

Rolling 24-hour readings provide information on the peak gas reading, even without an alarm. This gives you the heads up for potential trouble spots in the system.

Worldwide Use

Used in countries around the world, the Honeywell BW™ Solo can display gas readings in all major languages.

Part Number: BWS-HL-Y

BWS-N-Y BW Solo Single-Gas Detector, (NO) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-N-Y

Safety And Compliance In New Single-Gas Detection Solutions

 

Increase your single-gas detection ability with equipment that is easy to service and operate. Replacing the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the new generation of detector, offering a full selection of sensor choices. Upgrading to the Honeywell BW™ Solo allows you to: Obtain compliance Connect workers Increase equipment life cycle while decreasing ownership cost Increase worker safety

 

Smaller Size

The smaller size and lightweight design make the Honeywell BW™ Solo a top choice for any workplace or environment.

Simplicity of Design

The Honeywell BW™ Solo is simple in its design, making it easy to change out sensor filters, batteries, and even the sensor anywhere in the field. No tools required, just pop open and door and complete the replacement.

A Full Range Of Sensor Options

Regardless of the workplace or the type of exotic or common gas detection required, the Honeywell BW™ Solo offers the right sensor of the job.

The detector can be used for:

• Carbon monoxide (CO)
• Chlorine dioxide (ClO₂)
• Chlorine (Cl₂)
• Oxygen (O₂)
• Ozone (O₃)
• Sulfur dioxide (SO₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Hydrogen sulfide (H₂S)
• Hydrogen (H₂)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Ammonia (NH₃)

 

Safer Workplaces And Greater Accuracy With the 1-Series Sensor

For frequent gas monitoring needs, the 1-Series sensor offers a durable, reliable sensor that offers a fast response as well as a long duty cycle. Using next-generation technology, this sensor offers more than just a basic detector while providing top performance in extreme environments.

When Detection Speed Matters

For rapid detection of O₂, H2S, and CO, the 1-Series sensor's square design and lower profile allows for rapid diffusion of the gas for faster detection and more accurate readings. As a small system, it is also streamlined and easy to work with, even in cramped locations.

Warranty Benefits

With typical use, the 1-Series sensor has a life cycle of up to five years, and it comes with a full three-year warranty. This means longer use, less downtime, and an increased ROI.

Developed In-House

The 1-Series sensor was developed by City Technologies, a Honeywell company. They are also the company that designed and developed the 40XV and the long life 40xLL oxygen sensor that are used in the Honeywell BW detectors.

No Nuisance Alarms

Are you frustrated with false alarms with your current detectors? The 1-Series sensor is highly reliable and accurate and can be used in areas with high humidity and transient pressures, as well as temperatures of -40°C to 60°C.

Easy Switching on the Job

Replacing a sensor has never been easier. With no need for specialized tools of complicated processes, just remove the old sensor and replace it with the sensor of your choice.

Greater Fleet Management Efficiency And Data Centralization

Streamlining data collection and management throughout the fleet provides greater efficiency while saving you time and money. Automated fleet management is simple with the Honeywell SafetySuite Device Configurator software and the IntelliDox.

Docking for Data Transfer and More

The IntelliDox makes it easy to simply put the detector in the dock to transfer test results and perform specific actions. These actions include changing set points, completing bump tests, turning on bump reminders, or calibration. It is an efficient way to update firmware for the Honeywell BW™ Solo. The software allows data to be sent to a storage computer over USB or Ethernet connection.

Grouping IntelliDox allows for up to five docks to be grouped together. Each can be used to control a specific detector independently, and all have a unique keypad, pump, cutting edge LCD screen, and operation options. Power and calibration gas are shared with the group for efficiency.

Manage Compliance in One Place

The Device Configurator operates on Windows-based software and allows for centralized import, viewing, and export of data across all detectors. It also allows for convenient configuration of set points, firmware update deployment, and compliance, safety, and productivity monitoring.

Adding Cloud Technology

For even greater versatility and access to data, plan to subscribe and upgrade to the Honeywell SafetySuite Device Manager that is a cloud-based service. This allows you to:

• See all detectors in the fleet in one easy to use interface
• Receive immediate text and email notifications of alarms
• Configure your reporting requirements
• Maximize compliance across the fleet
• Have all data in one convenient and accessible location

 

Additional benefits in linking your smartphone with the detector. As part of the Connected Worker portfolio offered by Honeywell, wireless technology makes managing the detector even easier.

Setup, Configuration, and Verification with an App

The Device Configurator app can be used to configure the Honeywell BW™ Solo detector with ease. This includes setting up the detector, choosing alarm set points, and setting up specific actions. Using BLE or Bluetooth Low Energy technology, this can all be done from up to six meters away.

The app is also handy to check calibration and bump data, and to access information on which worker performed the calibration, when the calibration was done, and what gas was tested. Additionally, it can email a certificate as needed or even manage firmware updates.

No Docking Station? No Problem

It is possible to easily and conveniently access data from the Honeywell BW™ Solo using wireless BLE. This allows the detector to share information with the desktop software from all detectors in the fleet.

Staying Connected

The Honeywell Safety Communicator mobile app allows immediate and real-time access to data without the need for docking, as well as information on worker location and safety. From your smartphone app, all types of readings and data are sent to our monitoring software. Managers can access the data from remote locations as long as they have an internet connection.

Safety, Compliance and Peace of Mind

 

Full Control at the Push of a Button

Working in the field means working with gloves and safety gear, and the Honeywell BW™ Solo takes this into consideration with a one-button operation. Both the button and the Honeywell SafetySuite Device Configurator software can be used to configure and adjust the detector parameters with ease. Measuring for time-weighted average (TWA) and short-term exposure limit, as well as the highest gas levels in the past 24-hours, are also accessible.

Detector Compliance or Non-Compliance

With just a glance at the Honeywell BW™ Solo, workers can see if it is in compliance or is not in compliance. The flashing green lights on the IntelliFlash™ system means it is bump tested and correctly functioning. Blinking red lights signal a problem, including a low battery, calibration or bump testing needs or gas event has occurred.

Easy to Detect Alarms

For noisy work environments, the Honeywell BW™ Solo offers audible alarms, vibrating patterns and red lights around the detector to signal danger.

Usage and Configuration

 

Assigned Detectors

Assigning detectors to workers and locations ensures precise location of gas events and user information.

Peak Readings on 24-Hour Rolling Basis

High gas levels that do not reach alarm parameters are still critical to track. The Honeywell BW™ Solo provides data for a rolling 24-hours, including peak gas readings for early detection of problems.

Language Options

Designed for use around the world, the Honeywell BW™ Solo provides gas readings in all major languages, including Japanese, Russian, English, Korean, Spanish, and French.

Part Number: BWS-A-Y

BWS-C-B BW Solo Single-Gas Detector, (Cl2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-C-B

BWS-A2-Y BW Solo Single-Gas Detector, (NH3 ext range) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A2-Y

BWS-R-Y BW Solo Single-Gas Detector, Hydrogen (H2) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-R-Y

BWS-A2-B BW Solo Single-Gas Detector, (NH3 ext range) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-A2-B

BWS-E-B BW Solo Single-Gas Detector, (ETO) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-E-B

BWS-M2-Y BW Solo Single-Gas Detector, (CO-H2 resistant) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-M2-Y

BWS-M2-B BW Solo Single-Gas Detector, (CO-H2 resistant) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-M2-B

Custom gas detection that performs well in all environments

 

The IntelliDoX smart docking system is designed to compliment your Fleet Manager II program. In fact, it enhances the fleet managing process, making it more reliable, productive, and efficient.

Take instrument management to the next level

IntelliDox lets you manage up to five gas detectors at once. Set up and installation are fast (less than 2 minutes). You'll save time and trouble with tasks like bump tests and calibrating. Because each module contains its own pump, screen, and operating system, you can multi-task with your fleet. In fact, it's possible to calibrate and bump test at the same time.

Flexibility combined with convenience

Keep your detectors working to your specs and needs. It's easy to change alarm settings whenever you want to. Many other parameters are simple and easy to set.

Fast and simple record-keeping and data backup

Do you need to transfer gas detection info to your data backup system or to a computer? You can use Ethernet or any USB device.

• Track worker compliance and change alarm settings
• Expand your fleet management to as many as 5 modules
• Simple and efficient setup - saves time and headaches
• Customized maintenance-free detection made easy

 

Compatible Detectors

BW Clip Series
ConneX1
GasAlertMicroClip Series

Bump Testing with Greater Efficiency

FastBump is one of the most efficient ways to bump test your detectors. It lets you enjoy all the standard bump test features and use test gas in the most efficient manner, optimizing the entire process while saving gas.

IntelliDoX Features:

• Simplified record keeping, calibration, configuration, bump testing. Update settings for these functions: Calibration Reminders & Bump test scheduling; Alarm settings; Preferences for time display; Can show gas reading with Alarm; Transfer event log data; Enable or disable non-compliance Indicator; Update detector firmware; Detect hibernation
• Industry's leading FastBump testing - no more bottlenecks and you avoid wasting expensive purge gas
• Dock as many as five modules together, each unit has LCD screen and keypad for independent operation
• You don't have to connect to the network for retrieving data or module configuration - just use the USB port
• Ethernet port allows for fast network connection
• Simple "no tools required" setup
• Bump tests and span calibration are easy

 

IntelliDoX Docking System Specs

Size (w x h x d): 5.4" x 14.2" x 4.3" (13.8 cm x 36.2 cm 10.9 cm) (one docking module)
Weight: 4.2 pounds (1.91 kg)
Power supply: 12 V / 8.33A ITE
Real-time clock: Time and date stamp
Communications method: Detector unit and module can communicate back and forth via infrared 2-way system

External interface

• 1 Ethernet port
• 1 USB port

 

Menu navigation

• Adjust display settings
• Review IntelliDoX module
• Password protect (if desired)
• Configuration for gas inlets
• Adjust time & date
• Configure UI display language: English, Portuguese, French, German, and Spanish

 

Automatic tests

• FastBump: 10 seconds
• Standard bump: 40 seconds

 

Data Storage: 2 GB (internal storage capacity)

Pump

• Each IntelliDoX module comes with its own pump
• Flow Rate = 350 ml/min

 

Instrument Management System: version 4.0 or newer Fleet Manager II

Ratings: Each IntelliDox Docking module complies with the FCC Part 15 and ICES 003Canadian EMI requirements. Operation is subject to these 2 conditions: (1) Must not cause harmful interference, and (2) This device must accept any interference including that which may cause undesired operation.

Warranty: Full 24 month (2-year warranty)

Options and Accessories

Fully portable IntelliDoX test station (in a Pelican case). Every kit contains -two docking modules, AC power adaptor, demand flow regulator, tubing, Ethernet cable and more.

Multi-Inlet Key

Lets you configure single IntelliDoX modules to connect multiple calibration gas

A list of all the accessories & kits is available.

DUE TO ONGOING PRODUCT IMPROVEMENT AND RESEARCH, SPECS CAN CHANGE WITHOUT NOTICE.

Part Number: DX-SOLO

BW Technologies Calibration Gas Regulator (0.5 LPM)

Part Number: REG0.5

SR-A04 Replacement Ammonia (NH3) Sensor

BW Technologies is a global leader in gas detection solutions. The company offers a wide range of products, accessories, replacement parts, and sensors. The replacement sensors are made with the highest safety standards in mind. The sensors are economical and convenient to install. The replacement ammonia sensor is a plug-in style sensor that easily fits into compatible BW Technologies instruments. To ensure compatibility, please consult your product specification sheet.

BW Technologies IntelliDoX Enabler Kit, NA Version (North America)

Part Number: DXENBLNA

Optimal Single-Gas Detection With Next-Generation Technology

 

Sensor options combined with a system that is easy to service and to operate in the field. The next-generation of single-gas detection is here with the Honeywell BW™ Solo. Replacing the GasAlert Extreme and the ToxiPro®this sensor offers: Increased worker safety Enhanced compliance New levels of protection Lower cost of purchase and operation

Practical to Use

Small and lightweight, the Honeywell BW™ Solo is convenient, functional, and easy to use in any work environment.

Low Cost, Long Life

The Honeywell BW™ Solo design allows for easy replacement of sensor filters, batteries, and sensors. Just pop off the panel door – no need for special tools.

Common and Exotic Gas Sensors

In power and petrochemical plants, as well as in manufacturing or other industrial environments, the Honeywell BW™ Solo offers the right sensor for the job. Both common and exotic gas sensors are included with the detector, including:

• Hydrogen sulfide (H₂S)
• Carbon monoxide (CO)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Oxygen (O₂)
• Ozone (O₃)
• Phosphine (PH₃)
• Ammonia (NH₃)
• Chlorine (Cl₂)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

Maximizing Safety With The 1-Series Sensor

The Honeywell BW™ Solo is the first portable, single-gas detector to come with the 1-Series sensor. This is a proven performer in even the most difficult conditions, and with next-generation technology, the 1-Series sensor is the right choice.

Faster Reading and Response

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂, with additional sensors for other gases soon available. It has a square design, about one-third of the size of other sensors, making it both effective as well as streamlined.

Exceptional Life

With typical exposure to gas, the 1-Series sensor can last up to five years without any need for replacement and downtime for the equipment. It also offers a three-year warranty, providing peace of mind with the purchase.

A Honeywell Company Product

The 1-Series sensor was designed and developed by the Honeywell company, City Technology. With over four decades of sensor manufacturing experience, they are also the company responsible for the 40xLL and the 40XV oxygen sensors used in the Honeywell BW.

Reliable Performance

Tired of nuisance alarms and unreliable readings? These are the thing of the past with the Honeywell BW™ Solo, which is proven in harsh, humid, and transient pressure environments, as well as in temperatures from -40°C to 60°C.

Keep Sensor Downtime Low

Need to change out the sensor? This is a simple, easy, and very quick task - just remove the old sensor and drop in the new, no need to expose the sensor printed circuit board or internal component.

Streamline Your Fleet and Centralize Data Management

Designed to be used with different technologies, the Honeywell BW™ Solo can be used with an IntelliDox docking statio and the Honeywell SafetySuite Device Configurator for maximum efficiency as well as fleet management.

The IntelliDox Advantage

The IntelliDox dock is designed to hold the detector and automatically transfer the data and test results. It can also be configured to perform any desired actions automatically, increasing efficiency. These actions include:

• Bump tests and reminders
• Calibration
• Modification of set points
• Firmware updates

 

Data about peak readings and alarms are transferred to a computer from the IntelliDox by Ethernet or USB connection. Grouping up to five IntelliDox still allows for individual use, while each dock has its own LCD screen, keypad, and pump. Grouped IntelliDox share calibration gas and power for ease of operation.

Centralize Compliance Made Simple

Utilizing Windows-based software, data can be exported and viewed on any Windows computer. The computer can also be used to configure the detector, upgrade firmware, and ensure full compliance across the fleet.

Utilize the Power of the Cloud

Choosing to subscribe to Honeywell SafetySuite Device Manager cloud-based system allows you to:

• Access information from any internet-connected device
• Receive immediate alarm notification via email or text
• Monitor the entire system through easy to navigate dashboards, even with multiple sites
• Obtain the reports you need
• Boost compliance across all workplaces

 

Managing The Detector From Your Smartphone The Honeywell Connected Worker portfolio integrates the Honeywell BW™ Solo, allowing wireless control of the detection for increased compliance, safety, and worker productivity.

 

The Power of the Mobile App

The Device Configurator app puts the control of the Honeywell BW™ Solo right on your smartphone.

The app can be used in the configuration, alarm setup, firmware updates, and the control of the detector from up to 6 meters using Bluetooth Low Energy (BLE) technology.

The app allows you to review bump and calibration data, to see the last gas tested and who ran the test, as well as to see the actual readings. This information can be placed on a certificate and emailed to the necessary stakeholders, all from the app.

Send Data to a Desktop Without IntelliDox

The use of BLE allows the wireless transfer of data from the Honeywell BW™ Solo to a desktop without the need for a docking station. This is an ideal option for a larger fleet, eliminating the need for docking stations.

Worker Safety is First

The Honeywell Safety Communicator app allows access to vital information without the need for docking. This provides gas readings and other vital data to monitoring software in real-time. Safety and fleet managers can access this information from any internet-connected device from any remote location.

Working Towards Full Safety and Compliance Across the Workplace

 

Easy Field Operation

The Honeywell BW™ Solo is designed to work in all types of environments. This includes one-button operation of the detector, eliminating the need to remove safety gloves to complete the test. The Honeywell SafetySuite Device Configurator can also be used to control the detector and set all parameters. It also provides data on short-exposure limit (STEL) and time-weighted average (TWA) as well as the peak gas concentration in the last 24 hours.

Visual Safety or Non-Compliance Confirmation

Are you tired of trying to see if a detector is in compliance or not in compliance? The Honeywell BW™ Solo makes this easy with flashing green lights to indicate bump testing and correct monitoring.

Red flashing lights means the detector is not in compliance, which could indicate a battery replacement is needed or the system needs calibration, a bump test, or these has been a gas event.

Auditory Alarms

The load and audible alarm and vibration of the Honeywell BW™ Solo are coupled with a ring of red LEDs around the detector, making it easy to see if an alarm has been trigged in any environment.

Simplicity and Sophistication for Use and Configuration

 

Know your worker's location

The Honeywell BW™ Solo can be assigned to a specific worker or a location for immediate information on the use of the detector in the event of a gas event.

Peak Reading Data For A Rolling 24-Hours

Peak readings of specific gases that may not reach the alarm threshold are still important to record. The Honeywell BW™ Solo offers a 24-hour rolling peak reading, allowing for early detection of problem areas.

Multiple Language Display

The Honeywell BW™ Solo can be configured to display gas readings in real-time in major languages, including English, Spanish, French, Russian, Korean, Japanese, and many more.

Part Number: BWS-XL-Y

BWS-N-B BW Solo Single-Gas Detector, (NO) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-N-B

BW Technologies Calibration Hose, Tygon (1 ft./0.3 m)

Part Number: C2HOSE11