All Products

65-2405RKSS S2 Series LEL Transmitter/Detector/XP Stainless Steel J-Box, 4 - 20 mA, Specify Calibration by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

Part Number: M1049

Part Number: 34L-111-50

5911-0300 GDC-350 Gas Sensor Monitor, NEMA 1 Housing, O2 Sensor by Bacharach

Bacharach's all new GDC-350 full-featured fixed gas monitors provide superior operation - standalone or as part of a larger system utilizing the standard analog outputs. This state-of-the-art instrument can detect a wide range of gases including carbon monoxide (CO), oxygen (O2), combustible gases, refrigerants and total volatile organic compounds (TVOCs). The GDC-350 provides a unique two sensor interface, allowing for multiple gases to be detected with onboard or remote sensors. Sensors can be located integral to the unit or remotely allowing for sensors to be placed directly in areas where potential leaks can occur. Bacharach s proprietary calibration algorithms extend the amount of time required between calibrations, reducing maintenance costs and lowering the overall cost of ownership for non-critical applications.

The GDC-350 has all the features and functionality for any application. LED alarm indicators visually indicate when alarm conditions are met and an audible alarm alerts nearby personnel. An onboard alpha numeric display shows gas readings in real time for each sensor. Integral dry contact relays are available to drive external audible / visual alarms, activate fans, or connect to building management and control systems. Installation and maintenance is simple and easy, reducing overall system cost. A pre-wired plug-in option is available for out-of-the-box operation. Simply plug the unit into any standard AC outlet for immediate detection and protection.

98766-09 Traceable 300-Memory All Function Digital Stopwatch with Calibration by Digi-Sense

Three-line display on this multipurpose stopwatch/timer/chronograph shows running time, cumulative-split, and interval-split - simultaneously. Easily repeat functions of countdown alarm timing as a stopwatch. Set timer to count down at any time from 10 hours to 1 second. When zero is reached, the timer alarms and begins to count down again from the programmed time. The repeat cycle continues automatically, or until stopped.

Display always shows running time remaining to zero and cycles counted from 1 to 300. Stopwatch also includes pacer, stroke, and speed calculation functions. As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the week. O-ring sealed water- and shock-resistant ABS plastic case has nonskid rubber edges.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Recall up to 300 memories both during and after event timing
• Set time-of-day alarm
• Pacer function works great for physical education tests

Includes

One 3 V button cell, lanyard, and NIST-traceable calibration certificate with data.

08080-78 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, 25-125F, 1F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

pH630C pH/Temperature & Replaceable pH Electrode by Jenco

VisionPlus pH630 is a rugged, easy to use, IP67 rated pH tester with temperature readout. Key features include IP67 rated body, automatic temperature compensation, up to 3 point calibration and replaceable electrode module. Available in degrees Celsius and degrees Fahrenheit models.

This pH tester is RoHS compliant.

• Automatic temperature compensation
• 1, 2 or 3 point calibration
• Stores calibration data
• Replaceable electrode module
• High noise resistance
• Simultaneous display of pH and temperature
• Large temperature range
• Dedicated button for data hold
• Low battery indicator
• IP67 rated body for water-proof and dust-proof
• RoHS compliant

GrowControl™ SXHM Temp, pH, EC Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

3015-4790 (IATA) PGM-IR N20 Monitor by Bacharach

The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or elapsed time weighted average (TWA) with a resolution down to 1 ppm.

The unit self-calibrates in 4 minute intervals by drawing ambient air through its filter to provide a good "zero" baseline, enabling the monitor to be used in contaminated environments without affecting the readings of the target gas. Additional features include datalogging of up to 200 readings, and a leak check mode with "tick-rate" audible / visual alarms. The PGM-IR's probe helps to locate leaks in small or hard to reach places and provides up to 12 hours operation on a fully charged battery.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for precision low-level leak detection
• Detection and measurement of CFC, HFC and HCFC refrigerants, as well as CO2, N2O and SF6 gases
• Locates leaks in contaminated or high-ventilation areas - immune to changes in temperature and humidity
• Cut leak inspection times by 50%
• Instrument comes with battery pack, probe, charger and soft case with shoulder strap
• LCD screen displays real-time gas concentrations with an audible tick-rate to pinpoint source of leaks
• Locate leaks within display cases where traditional leak detectors cannot
• Applications include refrigerant gas detection, trace gas analysis and medical monitoring

Includes:

• Rechargeable battery pack
• 120 VAC charging adapter
• Soft case

6201-5107 IAM-100 Gas Detector, Remote Sensor/Faceplate, R410a 0-1000ppm, 110 VAC by Bacharach

The IAM-100 Gas Monitor from Bacharach offers exceptional continuos monitoring performance and flexibility at an economical price. By itself, or integrated into a comprehensive detection system, the IAM-100 is a scalable solution for detecting a variety of refrigerants, combustible gases and VOC gas leaks at the lowest possible cost.

Onboard LEDs illuminate when the sensor is in an alarm state while the unit's audible alarm alerts personnel in the area that levels have exceeded the desired limit. The audible alarm can be muted with the onboard silence switch. Integrated dual relays enable the IAM-100 to shut-off refrigerant or propane supply lines while the second relay can be used as a connection to a building BMS or BAS system.

The IAM-100 is an alarm threshold device. When the range of the sensor is exceeded, the detector will go into alarm. For example, a unit with a 1,000 ppm R-410a sensor will activate its alarm when the detected refrigerant meets or exceeds 1,000 ppm.

Features & Benefits:

• Real-time continuous gas detection that's scalable, reliable and affordable
• Ideal for commercial applications such as hotel rooms, apartments, dorms, hospitals, restaurant kitchens or battery charging rooms
• Detects refrigerants (at ?1,000 or ?10,000 ppm), TVOCs (at ?1,000 ppm), combustible gases and hydrocarbons (at ?5,000 ppm)
• Fast-responding, long-life sensors
• Integrated visual LED and audible alarms
• Two onboard relays to activate shut-off valves, exhaust fans, or connect to a BMS or fire panel
• Remote sensor with aesthetic faceplate available for discreet monitoring in decorative interiors

1418-116 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Nitrogen Dioxide (NO2), 0 - 30 ppm by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

8327613 Pac 6500 H2S (US) by Draeger

The robust Draeger Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H₂S, SO₂ or O₂ quickly and precisely. Quick sensor response times and a replaceable battery also ensure safety.

Strong performance for maximum safety

You can rely on the Draeger Pac 6500: the personal single-gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulfide, sulfide dioxide or oxygen with precision and reliability.

Powerful sensors with a very low t-90 response time ensure quick reactions. The Pac 6500 is versatile thanks to its wide measurement range. For example, the CO sensor measures concentrations from 1 to 1,999 ppm, and the H₂S sensor from 0.4 to 100 ppm.

Easy handling thanks to clear user guidance

The D-Light indicates whether functionality of the device has been tested and whether it is ready to use. The housing is also designed with your safety in mind: each sensor variant of the Draeger Pac 6500 features clearly visible color coding, thereby minimizing the chance of mistakes.

Robust design – even for the toughest conditions

The Pac 6500 is easily handled in even extreme conditions. Depending on the sensor, temperatures from -40 °C to 55 °C and air pressures between 700 and 1,300 mbar can be tolerated.

A membrane filter protects the sensor from foreign matter such as dust and liquids. The shock-proof, chemical-resistant housing meets the requirements specified in the IP68 standard rating.

User-friendly display with all important information

The large display clearly indicates the respective gas concentration. Other important information, such as the battery capacity, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

360° alarm with various functions

If the Draeger Pac 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic signal reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved at a later time, even if they have been acknowledged.

The Pac 6500 with oxygen sensor has two additional alarm thresholds in addition to the standard alarm threshold settings. This provides an additional level of safety as a pre-alarm, in addition to the main alarm, can be set for both oxygen enriched and oxygen deficient atmospheres.

Data logger and event logger for analyses and reports

The Draeger Pac 6500 logs concentrations and events along with the date and time. The data can be loaded on a PC via an interface and processed further there.

Economical operating costs

All versions of the Pac 6500 are equipped with extremely durable DraegerSensors and a powerful battery.

The Pac 6500 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, you can quickly and easily replace it yourself. The device is then ready to use again right away.

Fast function test saves time and money

Function tests and calibrations can be carried in the Draeger X-dock® calibration station. The automatic bump tests in the X-dock are a cost-efficient and convenient solution thanks to the short test duration and the extremely low consumption of test gas. The Pac 6500 is simply placed in the bump test station and automatically selects the correct setting.

721-005 Eagle 2 Portable Monitor for Sulfur Dioxide (SO2), 0 - 6.0 ppm by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

0563 0885 72 885-2 Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 885-2. Thanks to the 320 x 240-pixel detector, in combination with the high-quality Germanium optics, the testo 885-2 achieves an excellent image quality. This allows weak spots and problems to be reliably detected in industrial and building thermography. In combination with the Testo Super Resolution technology, the testo 885-2 records high-resolution thermal images in excellent quality (640 x 480 pixels). This means that even the smallest or very distant measurement objects can be thermographed very precisely.

• Detector size 320 x 240 pixels: With 76.800 temperature measurement points, the measurement objects are detected in outstanding image quality, extremely clearly and precisely.
• Super Resolution technology to 640 x 480 pixels Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexibility thanks to rotatable handle and fold-out, rotatable display
• Thermal sensitivity < 30 mK, Thanks to an excellent temperature resolution of < 30 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 30° lens With the standard wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Panorama image assistant For large measurement objects, the panorama image assistant allows the analysis and documentation of a total image stitched together from many individual images. There is no need to administer, view and compare several images.
• Site Recognition Technology For repetitive thermography of similar measurement objects, the Site Recognition technology offers the direct recognition, allocation and archiving of the measurement sites, as well as the automatic allocation and archiving of the the thermal images.
• High temperature up to 1200°C With the high temperature option, the measuring range can be flexibly extended up to 1200 °C.
• Special measurement mode for detecting areas with danger of mould
• Lens protection glass
• Auto focus
• Built-in digital camera with power LEDs
• Minimum focus distance 10 cm
• Voice recording using headset

The thermal imager testo 885-1 is delivered in a robust case incl.

• Pro software
• SD card
• USB cable
• Carrying strap
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery