All Products

M015-0003-000 UNI 321 Maintenance-Free Single Gas Detector, MP102 (2 Years), O2, Measuring Range: 30% ppm, Resolution: 0.1% ppm by mPower Electronics

The UNI 321 is a disposable or maintenance-free version of UNI single gas detector. It detects hydrogen sulfide (H₂S) or carbon monoxide (CO) in a selection of models with operating lives of 24 months (MP102) or 36 months (MP103). The detectors have large LCDs providing maximum readability in the field. Six bright red LEDs allow for quick alarm notification. Constructed of strong and durable material, the UNI 321 is designed to be comfortable, yet drop-resistant. The UNI detectors can easily be bump tested and calibrated using the CaliCase System.

Features, Functions and Benefits

• Simple GO, NO-GO!
• No Maintenance needed for life of instrument (except when used under extreme conditions)
• Low cost of ownership
• Large Display shows remaining operating time or alarm condition (For concentration display use UNI MP100)
• Durable Housing
• Solid stainless-steel Alligator Clip
• 50% larger single-cell Battery
• Daily functional Self-Test
• 50 Event Datalogging
• Docking Station for calibration and event download
• UL Classification Class 123, Groups ABCDEFG

AQ600 Standard Portable Dissolved Oxygen Meter Kit by Milwaukee

The AQ600 is a Portable Dissolved Oxygen meter ideal for use in school laboratories. Dissolved Oxygen measurements are also very important in fish farms and ponds, where Oxygen levels are continuously monitored to obtain optimal reproduction.

The AQ600 calibrates easily in 2 points (at 100% saturated air and in 0 Oxygen solution) and has Automatic Temperature Compensation which guarantees the highest accuracy. The low battery warning, easy to replace screw on cap membranes make this meter very simple to operate.

AQ600 is supplied complete with a MA840 D.O. polarographic probe with 3 m cable, calibration screwdriver, 2 spare membranes, MA7040 (20 mL) electrolyte solution, battery and instructions.

Includes

• MW600 DO Meter
• Membrane Electrolyte Refill Solution 230ml bottle
• 5 Extra Membranes
• Protective Case
• 9 Volt Battery & Testing Manual

BPU1K401 Peristaltic Pump 1400ml for IntelliDose by Bluelab

The Bluelab Peristaltic Pump 1400ml was designed with improved pump performance and ease of maintenance in mind

• Peristaltic Pump for Bluelab IntelliDose Controllers that doses up to 1400ml per minute
• Requires no tools to replace the squeeze tube
• The spring-loaded roller block design enhances both performance and squeeze tube life

Why Peristaltic Pumps?

• Affordable commercial dosing volume
• Two dose rates (sizes) available - 450ml and 1400ml
• Designed to maximize squeeze tube life
• Provides constant adjustment while the inside of the tube wears
• Adjusting to tolerances and any other deviations that may exist in the tubing
• Integrated brackets keep hoses tidy

6300-2002 MGS-150 Gas Transmitter, H2S: 0 - 200 ppm, IP66 Housing by Bacharach

MGS-150 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, and toxic gases. It comes standard with user-selectable analog and digital outputs that can be set for 4-20 mA, 0-5V, 1-5V, 0-10V, or 2-10V; allowing them to connect directly to most BMS, SCADA or control systems. Alarm indicators include an onboard alarm LED and audible buzzer, in addition to an alarm relay for connection to external audible/visual alarms or a BMS system. The product's alarm threshold value is pre-set to factory defaults but is also field programmable. A variety of housing options are available (shown below), from standard IP41 enclosures to IP66 water resistant housings, which allow the MGS-150 Series gas sensors to be placed in the toughest of conditions.

Ideal for Commercial and Industrial Refrigeration, Food Storage and Food Processing Facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.

Features & Benefits:

• Infrared, semiconductor and electrochemical sensor options to meet almost any gas detection need - at the most affordable cost.
• User-selectable analog outputs: 4-20 mA, 0-5V, 0-10V, 1-5V, 2-10V featuring 12/24 VAC/VDC operation.
• Fast-response sensors detect leaks quickly, which protect personnel and minimize refrigerant gas usage and environmental impact.
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustible gases & VOCs.
• Robust design and remote sensor options allow units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount, for placement in the toughest of environments.

2813-4505-002 EC 28i Intrinsically Safe Transmitter with Sensor, Ammonia (NH3), 0-500 ppm, Display by GfG

Features

• Full-featured smart transmitter for oxygen or a wide range of toxic gas measurement
• Non-intrusive AutoCal calibration adjustment
• Increased safety design to reduce installation cost in potentially hazardous locations
• Intrinsically safe (i) EX-Proof version
• BVS 04 ATEX E 132 X (electrical ex-protection) II 1G EEx ia IIC T4 C 0158
• Available in two configurations: Blind (no display), Display
• Barriers are required
• EX- conduit is not required
• Reduced installation costs

8326590 X-am 5100 Single-Gas Detector, H2O2 (US) by Draeger

For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Draeger X-am 5100 portable single-gas detector ensures safe handling of HF, HCl, H₂O₂ or hydrazine – thanks to proven Draeger sensor technology and a device design which is perfectly customized to reactive gases.

YOUR ADVANTAGES AT A GLANCE

• Continuous, precise and reliable measurement
• A special device design with direct gas entry provides fast sensor response and precise measurement data by preventing gas adsorption on the device housing
• Lightweight and robust
• Slip-proof and compact design
• Triple alarm: visual (360°), audible (multi-tone), vibration
• Easy to use: two-button operation and user-friendly menus
• Highly resistant to impacts, vibrations and electromagnetic radiation
• Can be operated using replaceable alkaline batteries or a T4 NiMH rechargeable battery, which can be charged right in the device

WD-35415-00 DO 700 Meter with Probe and Probe Stand by Oakton

Compact size is ideal for laboratory dissolved oxygen measurement applications

DO 700 meter measures dissolved oxygen in mg/L, ppm, or % saturation with simultaneous temperature display in °F or °C. DO is measured from 0 to 20 mg/L (ppm) or from 0 to 200% saturation to meet the needs of a wide array of applications. Independent 100% and 0% calibration points provide accuracy over the entire range. Measurement accuracy can be increased by manual barometric pressure and salinity compensation - meter automatically calculates offset. Built-in automatic temperature compensation provides greater precision by correcting for temperature variations between 32 to 122°F (0 and 50°C).

Large LCD features annunciators to aid in meter use and troubleshooting. Large display size makes viewing measurements easier. Meter is encased in a compact 6-1/8" L x 6-7/8" W x 2-3/4" housing which takes up a minimum of bench space. Water-resistant membrane keypad and convenient pullout reference guide provide useful features for the lab. Additional features include datalogging capabilities up to 100 points, a built-in electrode stand for convenient measurement, and selectable °F/°C temperature measurement.

• Large brightly-lit LCD shows allows for easy viewing of measured values
• Low-maintenance galvanic probe requires no warm-up time
• Built-in memory stores up to 100 data points

Measuring Range: -200 to +600 °C

200MT-12 GMA 200 Series Control Panel with Red Strobe, 12 Channels, 5 Amp Power Supply by GfG

The GMA 200-MT is our most flexible and advanced gas detection system controller. The design of the GMA 200-MT ensures simple and clearly structured operation in industrial and commercial applications. The system can be configured for control of any combination of GfG gas transmitters for the measurement of an extremely wide range of toxic and combustible gases and vapors.

ATEX 94/9/EC Conformity

The GMA 200-MT provides full conformity with ATEX Directive 94/9/EC, "Equipment and protective systems intended for use in potentially Explosive Atmospheres - Fourth edition September 2012 - Update December 2013". Conformity with ATEX 94/9/EC is explicitly required if switching or control functions for explosion protection are intended via the gas warning system.

Flexible modular design

Each GMA 200-MT module can control up to 16 individual gas transmitters (sensors). GMA 200-MT systems are scalable, and easy to expand by adding additional controller and relay modules. Optional gateway modules allow control via remote or touchscreen computer interface.

Integrated relays

GMA 200-MT systems include comprehensive and fully programmable relays. Each controller is equipped with 8 internal relays. Menu-driven software allows easy assignment of measuring points to relays, single or multiple alarms per point, alarm thresholds, configuration of collective or group alarms, zoning, fault messages and voting functions.

Relay modules

Each GMA 200-RT relay module provides an additional 16 freely configurable relays. A total of four additional relay modules (for 64 additional relays) can be managed by the same GMA 200-MT system. Digital connection with the GMA 200-MT controller allows remote positioning of the relay module wherever it makes the most sense, substantially reducing cabling and installation costs. Relay modules are available with or without an integral display for readings and system information, making it easy to add a remote terminal wherever needed.

Optional Fieldbus-Gateways

Optional gateway modules allow integration of the GMA 200-MT system into existing company networks based on TCP/IP, Process Field Bus or Process Field Network protocols. Monitoring and system performance data are easily exported for viewing or analysis. A wifi interface can be added to the gateway to allow wireless connection with a touch screen Windows® computer or smart phone to display or access system information.

GMA 200 power options

GMA 200-MT power options include traditional voltage inputs (2 x 24 V DC, 20-30 V), as well as operation via a redundant, uninterruptible power supply (UPS), ensuring continued operation of the gas warning system even during a power outage.

LED indicator lights

The status of the GMA 200-MT system (including operation, fault, service, alarm and relay status) is shown via LEDs. Individual LED indicators identify the type and severity of the alarm condition, (FLT, AL1, AL2, AL3), and any relays activated by the condition, (R1 through R8).

Graphical display

Currently measured values are displayed on a backlit, graphical LCD. In the event of an alarm the display changes color from green to red, and highlights the affected channels.

Operation via keypad

Operation of the GMA 200 is through easy-to-use menus, and a simple 5 button interface for alarm acknowledgement, and viewing information on the status of the gas warning system, detectors and relays. The intuitive push-button controls make it easy to navigate through additional screens of information. The integrated display enables the reading of alarm levels through the controller LCD for easy hazard assessment.

Datalogging standard

Measured values, mean values, alarm events and faults are stored on a microSD memory card.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Advanced and flexible controllers for combustible, O2 and toxic gas
• Complete controller package available in 4-16 channel configurations
• Up to 16 analog inputs or 16 digital inputs
• Scalable system with fully programmable menu driven relays
• Flexible, reliable and economic
• Clearly structured, easy-to-use push-button interface
• Backlit graphic LCD changes color to indicate alarm
• Local display, stack light horn and strobe
• Easy-to-install wall mounted enclosure
• Terminal blocks for easy transmitter termination
• Modbus (RS485) output
• NEMA 4X housing

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

6742 Floating Tent, 42" X 42" with 60" Drop Down Walls by Pelsue

The Pelsue Floating Tent is designed as a portable shelter for situations where traditional tents aren't practical. This new tent design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment). If you are looking for shade or protection from inclement weather the Floating Tent has you covered. Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks. With roll up sides it functions as both an umbrella and a four sided tent depending on your needs. Like all Pelsue Tent products, the tent material is Fire/UV/Water resistant and made in America. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Four Roll down sides, can be set at 60", 30", or completely rolled up.
• Zippers at each corner for entry and exit.
• Velcro Clasps to hold each side up when not in use.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Rope for tying off all four corners with pockets for storage.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Mesh carrying case.