$200 - $300

MW801 Standard Portable pH / Conductivity / TDS Combination Meter by Milwaukee

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!

The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements.

Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.

MFLStand Focus Lock Stand by Zarbeco

The MiScope FocusLock stand enables the use of Zarbeco's powerful FocusLock software with the MiScope Megapixel 2. Includes FocusLock Software (VTB-FL).

The MFLstand works with the MiScope-MP2 (including MiScope-MP2-IR; MiScope-MP2-UV; MiScope-MP2-WUVIR). MiScope 2 Megapixel is not included (must be purchased separately).

WD-35608-52 Conductivity/TDS Cell, Glass Body, Platinum Sensor, 3 ft Cable, K= 1.0 (Use with CON 400, CON 410, TDS 400, pH/CON 300 and pH/CON 510 meters) by Oakton

Feature built-in temperature compensation

• Ultem Cells with K = 1.0 have removable a probe guard for easy cleaning

Choose from three different cell constants:

• K = 1.0 for midrange conductivity measurements.
• K = 10.0 for high conductivity measurements (near or above 20 mS)
• K = 0.1 for low conductivity measurements (near or below 20 µS)

Each conductivity/TDS cell has a temperature range of 0 to 100°C.

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

Part Number: 34L-478

PH60-PW pH Tester Kit for Pure Water with LabSen 805 ATC pH Electrode by Apera

Discover the next level of precision, reliability, and portability with our top-rated professional PH60 tester, now paired with the Swiss LabSen 805 pH/temp. electrode. This powerful combination revolutionizes pH measurement, especially in challenging applications like distilled/drinking/RO/surface/boiler/storm/well/deionized water, etc. The electrode also works well in general water solutions. Elevate your pH measurement experience with our comprehensive test kit that leaves no detail unaddressed. This all-inclusive kit not only includes ready-to-use calibration buffer solutions (4.00/7.00/10.01) and soaking solution but also features the Apera CalPod Solution Organizer for optimizing your calibration process. All components are conveniently housed in a rugged carrying case, ensuring that you can effortlessly perform reliable pH measurements and calibrations wherever you go.

• PORTABILITY + RELIABILITY — The top-rated pH tester is now paired with the Swiss LabSen 805 pH electrode, allowing you to effortlessly take lab-grade pH measurement even in pure water such as istilled/drinking/RO/surface/boiler/storm/well/deionized water wherever you go.
• SWISS SENSOR TECH — Crafted with Swiss sensor technology and premium materials, the LabSen 805 pH electrode's triple ceramic junctions and special L membrane eliminate the common issue of jumping reading in pure water testing, ensuring you to quickly get stable results.
• ROBUST REFERENCE SYSTEM — LabSen 805 employs a Long-Life Reference System, outperforming ordinary Ag/AgCl systems by maintaining reference potential stability over time, which significantly extends the electrode's service life.
• INTELLIGENT METER BODY — The water-resistant meter body is featured with intelligent functions such as Automatic Calibration, Auto. Temperature Compensation, Reading Alarm Settings, Automatic Reading Lock, and more to meet your precision needs.
• COMPLETE TEST KIT — not only includes ready-to-use calibration buffer and soaking solutions, but also features the Apera CalPod Solution Organizer for optimizing your calibration process.

9251N D.O. & Temperature Handheld Polarographic Meter by Jenco

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

3840 VisionPlus 4-Wire Portable Conductivity/TDS/Temperature Meter by Jenco

VisionPlus EC3840 is an easy to use, IP67 rated portable conductivity meter with TDS, salinity and temperature readouts. Key features include a water-proof / dust-proof body, 4-wire conductivity cell, selectable cell constant and adjustable TDS coefficient.

• Simultaneous display of conductivity, salinity or TDS with temp. measurements
• Selectable cell constants for true wide range readings
• Adjustable TDS coefficient, reference temp., temp. coefficient for most flexible and accurate TDS readings
• Automatically finds the most suitable display range for your measurements
• Accepts 4-wire conductivity cell
• Uses one conductivity cell for conductivity, salinity and TDS measurements
• IP67 rated body for water-proof (up to 1 meter) and dust-proof operation
• Removable shock-resistant rubber boot

7707 GS300 Gas Sniffer by Wohler

The Wohler Gas Sniffer is a quick and highly sensitive measurement instrument for tightness control and leakage detection of gas tubes that contain combustible gases. Wohler delivers German technology for accurate and high-quality results. The Gas Sniffer notifies via vibration and acoustic signals in order to highlight also small leaks. The display shows a bar graph in order to present the current gas concentration proportionally. Here, the Gas Sniffer classifies the gas concentration level into one of twelve levels between 0 and 1200 ppm.

This tiny Gas Sniffer is the perfect all-round tool for controlling installations which contain liquefied or natural gas. The measurement results are reliable and professional and can thus be used by professionals in further processes. Craftsmen and industrial choose the right tool with this gas sniffer for inspecting gas tubes.

The Gas Sniffer comes with a short reaction time and an integrated flash light. The type of gas for measurement can be chosen. Due to its design it lies perfect in one's hand.

The Gas Sniffer enables its users to monitor industrial plants such as chemical plants or those in need for a high heat consumption using tubes with combustible gases. Craftsmen can use the Wohler GS 300 Gas Sniffer in order to inspect private properties and to make sure that home installations work properly and that there is no danger for occupants.

• Acoustic signal and vibration alarm to display even the smallest leaks
• Display of gas concentration via bar graph in twelve levels from 0 1,200 ppm
• Perfect tool to control natural gas, as well as liquefied gas installations
• Additional LED lighting turns on automatically in dark places, to search for leaks in hard to reach spots (flashlight function)

Additonal Information

• Wohler GS 300 Gas Sniffer
• 17" gooseneck probe
• 4 AA batteries
• Carrying case