$200 - $300

Part Number: DX-PS-UK

Weight: 3 lbs.

Part Number: 44L-414

WD-20250-58 1000A AC/DC Clamp Meter with NIST-Traceable Calibration by Digi-Sense

Reliably detect and measure the power quality running to your equipment to quickly find hidden issues. These meters feature durable, double-molded plastic housing and jaw.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Large backlit display provides easy-to-read measurements
• Autorange feature automatically selects optimal measuring range
• Low-battery indicator alert for when it s time for a fresh battery

400 A AC Clamp Meters (20250-55, -56)

• Diode testing, continuity check with a buzzer sound at 50 ?, and a measurement rate of 2 readings per second
• Built-in noncontact AC voltage detector
• CAT III-1000 V safety rating
• Improved measurement ease with data Hold function
• Model 20250-56 also measures DC current and capacitance, and features a peak Hold function that captures the peak AC current or voltage reading

1000 A AC Clamp Meters (20250-57, -58)

• Improve accuracy with True RMS check for load current and AC voltage, as well as continuity of contacts, fuses, circuits, and switches
• See power variations on analog bar graph display
• CAT III-600 V safety rating
• Model 20250-58 also features DC current measurement and True RMS for more accurate current readings

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads, temperature probe (models 20250-55, -56, and -58), carrying case, 9 V battery, and NIST-traceable calibration report supplied by InnoCal.

PENGTB Grower's Toolbox by Bluelab

The essential tools you need to easily measure your crop's nutrient solution.

These clever pens make it easy to measure the nutrient uptake (pH), the amount of food available (EC/ ppm) and the solution temperature (°C / °F), so you can create the best nutrient environment for your plants' growth.

With these tools and essentials in one value added pack, the Grower's Toolbox is a complete simple crop management system that helps you get it right, from the start.

Features

• Bluelab pH Pen
• Bluelab Conductivity Pen
• Bluelab Grow Book
• Bluelab pH & Conductivity Probe Care Kit
• Grower's Wall Chart

Part Number: 44L-473

Part Number: F10051VA

Part Number: CGQT342

MW803 pH/Conductivity/TDS/Temperature Tester with Replaceable Electrode by Milwaukee

The MW803 and MW804 are pocket testers with dual-level LCD that measure pH/ Conductivity/TDS/Temperature in one single tester!

The large display shows readings in an extended range from 0.00 to 14.00 pH and 0 to 3999 μS/cm, 0 to 2000 ppm (MW803), 0 to 20.00 mS/cm, 0 to 10.00 ppt (MW804) and simultaneously shows temperature from 0.0 to 50.0°C or 32.0 to 122.0°F. They have a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (β).

Ideal for quick and accurate measurements in swimming pools, aquariums and horticultural applications they can also be used in Industrial and Laboratory applications such as cooling towers, food processing, plating, drinking and waste water etc.

Part Number: 58L-467

Part Number: 58L-432

94460-17 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 2 SS Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Durable stainless steel probes withstand both low and high temperatures and are ideal for measuring temperatures of air, liquids, and semi-solids. Sensor stem measures 6.25"L x 1/8" dia.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Measure air/gas, liquids, or semisolids

Includes

Stainless steel probes with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

Part Number: 58L-479

Part Number: 34L-457S

Part Number: 58L-437

791JC Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type J by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations