$100 - $150

*Please note we can only ship RKI products to customers within the United States

Part Number: NI-UHPP103

025-2002-010 Humidity Filtering II Tube (10 Tubes / Box) by RAE Systems

The Humidity Filtering II Tube dries the sample gas entering pumped instruments. It is particularly suited for removing humidity effects on photoionization detectors (PIDs) while making VOC measurements, and typically lasts for about a half hour of continuous readings. The Humidity Filtering II Tube utilizes a solid adsorbent to remove moisture without impacting the detection and measurement of most VOCs.

Key Features

• Enables continuous reading of VOCs under extremely humid conditions for about one half hour (per tube) at room temperature
• Prevents drifting readings at high humidity when the sensor is dirty.
• Attaches to the Flex-I-Probe™ inlet with the same adapter used for ppbRAE 3000 VOC zeroing tubes.
• Especially useful for measuring chlorinated solvents and fuels under high humidity conditions as are often encountered during soil and water remediation.
• Can be used with other instruments having a built-in pump such as MiniRAE Lite, ppbRAE 3000, UltraRAE 3000, MultiRAE Lite, MultiRAE and MultiRAE Pro when humidity is an issue, when using a PID or making low-level LEL sensor measurements.
• Caution: Absorbs some compounds such as ammonia and slows the response of heavy compounds, especially at low concentrations or low temperatures.

Applications

• Soil and water remediation
• VOCs in landfill sites

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 510

WD-17106-20 InnoCal NIST-Traceable Calibration; pH Meter, Handheld/Benchtop by Oakton

Regulatory and quality agencies like FDA and EPA have strict guidelines for the determination and control of pH. Maintain your compliance with the help of InnoCal. We can calibrate new instrument purchases from Cole-Parmer, recalibrate your existing instruments, and provide maintenance and repair services.

InnoCal's metrologists can service most any brand of pH, conductivity, or dissolved oxygen meter including Oakton Instruments, accumet, Fisher Brand, Mettler-Toledo, YSI, WTW, Horiba, Hanna Instruments, Thermo Scientific Orion, VWR SympHony, and others.

Calibrations are performed on any handheld or benchtop pH meter with a BNC connection. The calibration contains five test points for pH (2, 4, 7, 10, 12) and five test points in millivolts across the range. If included, the automatic temperature compensation (ATC) probe will also be tested.

• Five electrical pH and mV test points

Part Number: CGBUMPH25

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 511

Part Number: GABMAX5

Part Number: 103L-161-19

Part Number: 103L-161-18

*Please note we can only ship RKI products to customers within the United States