Water Testing Kit

CWTK100 Cooling Water Test Kit 100 by AquaPhoenix

Properly monitoring and treating your cooling water system is vital to your daily operations. This cooling water test kit combines seven common test parameters into one, easy-to-use combination test kit. The Cooling Water Test Kit 100 is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness, Nitrite, Phosphonate and pH. Also included with this kit is the Myron L EP-10 conductivity meter. Test parameters and ranges can be modified based on your specific needs. Let us know how we can help customize this kit for you.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Nitrite (CAN): 1 drop = 50 ppm as NaNO2/5ml
• Phosphonate: 1 drop = 0.7 ppm as HEDP, 1 drop = 2 ppm as PBTC, 1 drop = 1.25 ppm as HPA
• pH Strips (100pk): 7.0-14.0
• Myron L EP-10: 0-10, 100, 1000, 10000 μM/ μS

BWTK100 Boiler Water Combination Test Kit by AquaPhoenix

This boiler water test kit combines five common test parameters into one, easy-to-use combination test kit for monitoring boiler systems. The Boiler Water Test Kit 100 is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness and Sulfite. Test parameters and ranges can be modified based on your specific needs. Let us know how we can help customize this kit to fit your needs.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Sulfite: 1 drop = 2 or 10 ppm as Na2SO3/25ml

BWTK200 Boiler Water Combination Test Kit by AquaPhoenix

The Boiler Water Test Kit 200 combines six common test parameters and two meters into one, easy-to-use combination test kit.. The kit is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness, Sulfite and Orthophosphate. We also added the Oakton pHTester 30 and Oakton ECTestr 11 in the foam lid. Test parameters and ranges can be modified based on your specific needs as can be the meters. Browse our product line and let us know how we can help customize this kit to fit your needs.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Sulfite: 1 drop = 2 or 10 ppm as Na2SO3/25ml
• Orthophosphate: 30 or 60 ppm as PO4
• Oakton pHTestr 30: Range -1.0 to 15.0 pH Resolution 0.01 pH
• Oakton EC Testr 11 Dual Range: 0 to 20.00 mS 0 to 2000 μS

7210000 EnviroGard Triazine Test Kit by Modern Water

Envirogard® is a rapid field enzyme immunoassay method for the analysis of water. It uses a coated tube technology to detect the analyte of concern.

Features:

• The first environmental immunoassay format to be made commercially available
• Broad screen for the triazine family of herbicides including atrazine
• Rapid field method for the analysis of drinking and environmental water samples
• Test up to six tubes at once
• Coated tube immunoassay

Test result type

• Qualitative and Semi-quantitative data

Samples per kit

• 20 tube test kit (tests up to 12 samples)

Assay range

• 0.1 ppb to 1.0 ppb
• LDD = 0.053 ppb (atrazine)

Sample methods

• Water and a variety of other matrices

Sampling time

• Sample-to-data in approximately 10 minutes

Specificity

The EnviroGard® Triazine Test Kit does not differentiate between atrazine and closely related compounds, but detects their presence to differing degrees. The chart below shows the approximate Lower Limits of Detection (LDD) for the cross-reacting compounds.

Basic Test Procedure

• Add 160 uL of calibrator, negative control or sample to the tube
• Add four drops of enzyme conjugate
• Incubate for five minutes
• Decant and wash four times
• Add four drops of substrate and chromogen
• Incubate for two minutes
• Add one drop of stop solution
• Read on photometer

Test kit components

• 20 antibody-coated test tubes
• One vial of negative control
• One vial of atrazine-enzyme conjugate
• One vial of 0.1 ppb atrazine calibrator
• One vial of 1.0 ppb atrazine calibrator
• One vial each substrate and chromagen
• One vial stop solution
• One test tube rack

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use for up to 8 hours
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Triazine EnviroGard® test kit (7210000)

Required test equipment

• Disposable-tip pipette which will measure 160 uL
• Timer
• Glass tubes or vials for calibrator preparation
• Tap or distilled water for rinsing tubes
• Marker pen
• Pipette that will measure 0.5mL

Other recommended materials

• Calculator
• Spectrophotometer

A00071 Atrazine 100 Test Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil, food or water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Tests up to 50 samples at once
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4670 for drinking water

Test result type

• Quantitative, semi-quantitative or qualitative depending on protocol selected

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• 0.04 to 5.0 ppb
• LDD = 0.1 ppb

Sample methods

• Methods exist for soil and a wide variety of commodities

Sampling time

• 'Sample-to-Data' in approximately 60 minutes

Specificity

Basic Test Procedure

• Add 200 μL of calibrator or prepared sample, 250μL enzyme conjugate and 500 μL antibody coupled magnetic particles.Vortex
• Incubate for 15 minutes
• Using the RaPID magnetic separator, decant and wash
• Add 500 μL colour solution
• Incubate for 20 minutes
• Stop the reaction and read colour at 450 nm
• Quantitive results and QC parameters are calculated and printed automatically using the RPA-II® spectrophotometer

Test kit components

• Antibody coated magnetic particles, enzyme conjugate, colour development, stop andwash reagents for analysis of 100 test tubes
• Standards for 0.1 1.0 and 5.0 ppb Atrazine
• Zero standard and 3.0 ppb control standard
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• Atrazine RaPID Assay (A00071)
• Atrazine sample diluent (100mL) (A00051)

Required test equipment

• Accessory kit (purchase) (6050100)
• Accessory kit (rental) (6997010)
• Accessory kit components: Magnetic separation rack (A00004), Repeator pipette (A00008), Adjustable volume pipette (A00176), Adjustable volume pipette (6000111), RPA-II analyser with printer (A00014), Vortex mixer (A00014), Digital timer (A00015)

7002000 EnSys TNT Explosives Soil Test Kit by Modern Water

EnSys® explosives kits are rapid field or laboratory colourimetric tests for the analysis of explosives in soil. The kits are based on a method developed by Dr. Thomas Jenkins at the US Army Corps of Engineers - CRREL.

Features:

• Detects TNT, DNT and related explosives
• Convenient and rapid testing in the field or laboratory
• Extractions can be performed simultaneously with analysis in singlicate
• TNT extracts can be used with EnSys RDX test
• Training available
• EPA SW-846 Method #8515

Test result type

• Quantitative data

Samples per kit

• 20 soil samples

Assay range

• Soil: 1 ppm to 30 ppm total TNT
• Higher sample concentrations can be quantified by sample extract dilution

Sample preparation

• Soil samples require prior extraction using the included extraction components
• Soil samples should be dried prior to analysis
• Soil sample extracts may be saved for use with the RDXsoil test kit

Sampling time

• 'Dirt-to-Data' in approximately 30 minutes
• Typically about ten samples can be run in about 40 minutes
• Soil extraction time is typically 2 - 10 minutes per sample plus test run time of approximately 2 minutes

Specificity

The EnSys® TNT test is specific for TNT and related explosive compounds and exhibits the following sensitivities. The TNT test does not measure RDX or HMX.

Basic Test Procedure

• Clean cuvettes and set spectrophotometer
• Extract soil sample: Weigh 10 grams of soil sample, Add sample to extraction jar, Measure 50mL acetone into 50mL tube, Pour acetone into extraction jar and shake for three minutes, Allow to settle for five minutes
• Draw 25mL liquid into the syringe from above the sediment layer in extraction jar
• Attach filter tip to syringe and transfer 25mL of sample extract into a cuvette.
• Place cuvette in spectrophotometer and record initial absorbance
• Add one drop of developer solution, cap and shake for three seconds.
• Remove stopper and place the'sample' cuvette in cell holder and read sample absorbance.
• NOTE: For analysis of samples containing DNT,and/or where DNT concentration is of concern, samples must be allowed to develop for 10 minutes before reading sample absorbance. This will not affect colour development for other nitroaromatics.
• Record data and calculate results.

Test kit components

• 20 weigh boats and wooden spatulas
• 20 extraction jars
• One 50mL graduated tube
• 20 - 30cc syringes and syringe filters
• 1 bulb pipette
• 1 TNT control vial and ampoule cracker
• Developer solution
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
• Store at ambient temperature 64° to 81°F (18° to 27°C)
• Operate the test at temperature greater than 40°F/4°C and less than 100°F/39°C (4°C)

Required test materials

• EnSys TNT explosives soil test kit (7002000)

Required test equipment

• EnSys TNT accessory kit (rental, includes HACH DR2800) (6999700)
• Acetone: hardware or laboratory grade (min 50mL per sample)

Other recommended materials

• Hach DR/2000, DR/2010 or DR/2800
• 2 matched hach cuvettes
• 2 cuvette stopper plugs
• Balance
• Tap or laboratory grade water for cuvette rinsing
• Marker pen, calculator
• Absorbent paper
• Liquid waste container
• PPE: Disposable gloves, eyewear

7020301 PCB EnviroGard 12T Soil Test Kit by Modern Water

Envirogard® is a rapid field enzyme immunoassay method for the analysis of soil remediation, assessment and industrial testing. It uses a coated tube technology to detect the analyte of concern.

Features:

• Convenient and rapid testing in the field or labatory
• Tests up to 10 samples at once
• Two detection levels of your choice are provided with each sample
• High level of accuracy
• EPA SW-846 Method #4020

Test result type

• Semi-quantitative or qualitative data
• Knowledge of specific aroclor(s) present will aid accuracy

Samples per kit

• Dependent on batch size and number of detection levels
• Each sample can be tested one at a time or in batches of two to ten samples

Assay range

• Soil: 0.5 ppm to 500 ppm with dilutions
• Wipes: 5.0 ug/100cm² to 5000 ug/100cm² with dilutions

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately)
• The sample extraction kit provides materials for 12 soil sample extractions with methanol

Sampling time

• Approximately two minutes per sample plus assay run time of approximately 30 minutes

Basic Test Procedure

• Transfer soil or wipe to extraction jar
• Cap and shake for one minute
• Filter extracted sample
• Pipette and dilute samples with dilution ampule
• Transfer 1 ml of buffer to glass buffer tubes
• Pipette and transfer sample to buffer tubes
• Fit antibody coated tubes on buffer tubes; invert and mix;return to antibody coated tube
• Incubate for 10 minutes
• Connect antibody coated and conjugate tubes; invert and mix, return to antibody coated tube
• Incubate five minutes
• Wash antibody coated tubes vigorously four times
• Using a repeater pipette at setting two and 5 mL tip,transfer 200 uL substrateA to each tube
• Add 200 uL substrate B to each tube and mix
• Inclubate for 2.5 minutes
• Add 200 uL STOP to each tube
• Read tubes in photometer.Record data

Test kit components

• 48 antibody coated tubes and PCB enzyme conjugate vials
• 48 glass buffer tubes
• Substrate and stop solution reagents
• PCB standard
• Pipette tips and bulb pipettes
• Buffer
• Amber vials
• Wash solution
• 12 ampule crackers

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
• Store at ambient temperature 64° to 81°F (18° to 27°C)
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not freeze test kit components

Required test materials

• PCB EnviroGard 12T accessory kit (6050400)
• PCB EnviroGard 12T accessory kit rental (Includes all equipment required to operate test and interpret results)(6997020)

Required test equipment

• PCB EnviroGard 12T soil test kit (7020301)
• PCB soil sample extraction kit (7020301EB)
• EnviroGard PCB wipe sample extraction kit (7020301WA)

Other recommended materials

• Absorbent paper
• Liquid waste container
• Disposable gloves
• Marker pen
• Liquid and solid waste containers

SD50970 QuickChek Atrazine (10 test kit) Requires QuickChek Reader by Modern Water

Atrazine is one of the most widely used herbicides in the United States and Australia. Since 2001 it is the most commonly detected pesticide in drinking water supplies in the United States.

Why test for atrazine?

Many research studies have associated long term exposure to atrazine with being toxic to wildlife, impairing the human immune system and causing birth defects. The US Environmental Protection Agency (EPA) has acknowledged the harmful effects and has limited its use to only be applied by a pesticide professional, with the exception for lawn care, turf and conifer trees.

In 2013, 73.7 million pounds of the chemical compound was applied in the United States and was used on more than half of all corn crops and up to 90% of sugar cane. High levels of contamination in water have been found especially in the Midwest and Southern United States making the requirement for a quick test kit to measure the amount of atrazine in water essential.

How can QuickChek Atrazine help you?

QuickChek™ Atrazine strip test produces results in just 10 minutes using the rapid enzyme immunoassay strip method and is ideal for detecting atrazine in both drinking water and environmental water samples. It has excellent analytical precision with a detection range from just 0.75 ppb to 10 ppb.

This innovative technology saves operators and laboratories both time and resources when compared to costly analytical instrumentation that can take over an hour to achieve results. This enables plant operators to take faster corrective action when atrazine levels spike due to storm water runoff.

Basic Test Procedure

• Prepare sample
• Add contents of dropper pipet to reagent well of cassette
• Incubate for 10 minutes
• Insert cassette into strip reader
• Select 'Read sample'
• Record email results

Test kit components

• 10 strip tests
• Test kit instructions
• Dropper pipette

Four result categories

• Below detection level
• Less than 1.0 ppb
• Less than 3.0 ppb
• ≥3.0 ppb and ≤10.0 ppb and higher
• Higher than 10.0 ppb

Four result categories

• Below detection level
• Less than 1.0 ppb
• Less than 3.0 ppb
• ≥3.0 ppb and ≤10.0 ppb and higher
• Higher than 10.0 ppb

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.

7085000 EnSys RDX Explosives Soil Test Kit with Extraction Jars by Modern Water

Ensys® explosives kits are rapid field or laboratory colourimetric tests for the analysis of explosives in soil. The kits are based on a method developed by Dr. Thomas Jenkins at the US Army Corps of Engineers - CRREL.

Features:

• Detects RDX, HMX and related explosives
• Convenient and rapid testing in the field or laboratory
• Extractions can be performed simultaneously with analysis in singlicate
• Can test sample extract from EnSys TNT test
• Training recommended
• EPA SW-846 Method #8510 (proposed status final with 4th update)

Test result type

• Quantitative data

Samples per kit

• 20 soil samples

Assay range

• Soil: 1 ppm to 30 ppm total RDX
• Higher sample concentrations can be quantified by sample extract dilution

Sample preparation

• Soil samples require prior extraction using the included extraction components
• Soil samples should be dried prior to analysis
• Soil sample extracts from TNT soil test kit may be used

Sampling time

• 'Dirt-to-Data' in approximately 30 minutes
• Typically about six samples can be run in about one hour
• Soil extraction time is typically 2 - 10 minutes per sample plus test run time of approximately 20 minutes

Specificity

The Ensys® RDX test is specific for RDX, HMX and related explosive compounds and exhibits the following sensitivities. The RDX does not measure TNT, TNB or DNB.

Basic Test Procedure

• Clean cuvettes and set spectrophotometer
• Extract soil sample: Weigh 10 grams of soil sample, Add sample to extraction jar, Measure 50mL acetone into 50mL tube, Pour acetone into extraction jar and shake for three minutes, Allow to settle for five minutes
• Draw into syringe 5.5mL liquid from above the sediment layer in extraction jar
• Attach filter tip to syringe and transfer 5mL of sample extract into a 13mL tube
• NOTE: if nitrate/ nitrate interferents are present, attach an Alumina-A cartridge to the syringe and dispense through this
• Cut open an acetic acid bulb and add contents to the 13mL tube. Cap and shake
• Cut open a NitriVer pillow and add it to a 50mL reaction vial containing water
• Quickly pour acetic acid and sample into 13 mL zinc tube and cap. Invert twice and expose sample to zinc for EXACTLY 15 seconds
• With the filter attached to syringe and plunger removed, hold over reaction vial and pour zinc solution into it
• Rapidly filter the solution into the 50mL reaction vial, cap and shake for 30 seconds
• Incubate for 15 minutes for colour development and transfer contents to 30mL syringe barrel. Attach syringe filter and dispense into spectrophotometer cuvette
• Place cuvette in spectrophotometer and record absorbance
• Calculate results

Test kit components

• 20 weigh boats and wooden spatulas
• 20 extraction jars
• One 50mL graduated tube
• 20 - 50mL reaction vials with H2O
• 20 - 13mL zinc tube in foil pouches
• 20 - 10cc, 20cc and 30cc syringes
• 20 - 30mL tubes
• 20 NitriVer pillows
• 20 acetic acid bulb pipettes
• 60 syringe filters
• 1 bulb pipette
• 1 RDX control vial and ampoule cracker
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging.
• Store kits at room temperature (less than 80°F (27°C))
• Operate the test at temperature greater than 40°F/4°C and less than 100°F/39°C
• Do not expose the kits to direct sunlight

Required test materials

• EnSys RDX explosivessoil test kit (7085000)
• EnSys TNT explosives soil test kit (7002000)

Required test equipment

• Acetone: hardware or laboratory grade (min 50mL per sample)
• Alumina-A cartidges (if nitrate/nitrate interferents present) (6021200)

Other recommended materials

• Scissors
• Tap or laboratory grade water for cuvette rinsing
• Hach DR/2000, DR/2010 or DR/2800
• 2 matched hach cuvettes
• 2 cuvette stopper plugs
• Balance
• Marker pen, calculator
• Absorbent paper
• Liquid waste container
• PPE: Disposable gloves, eyewear

A00157 RaPID Assay PAHs 100 Test Tube Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Results available in approximately 60 minutes
• Tests up to 50 samples at once
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4035

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80+ samples)

Assay range

• Soil: 0.2 ppm to 5 ppm as Phenanthrene
• Water: 2.66ppb to 66.5ppb as Phenanthrene
• Range can be extended with additional dilutions
• Site specific calibration required to meet total PAH analysis

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions
• Water samples must be diluted three parts sample to one part methanol to prevent adsorptive loss

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes

Specificity

The total PAHs (sum of 16 PAH compounds) of the indicated contaminant types in soil samples are expressed below, at each of the three kit calibrator (standards) levels, in units comparable to results from GC method 8270 or HPLC method 8310.

The RaPIDAssay® PAH immunoassay test does not differentiate between phenanthrene and other polyaromatic hydrocarbons.The table below shows compounds at the limit of quantitation (LOQ) - an approximate concentration required to yield a positive result at the lowest standard.The IC50 is the concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Diluent zero, wash, enzyme conjugate, colour development, stop reagents and wash solution
• Standards for 2, 10 and 50 ppb as Phenanthrene
• Kit control as 25 ppb as Phenanthrene
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) is acceptable for day of use
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight

Required test materials

• PAH 100 test tube kit (A00157)
• Sample extraction kit(for soil samples only) (A00160EA)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-II RaPID analyser (6000081), Printer (6000082), Magnetic separation rack (A00004C), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

A00111 RaPID Assay Pentachlorophenol (PCP) 100 Tube Test Kit by Modern Water

RaPID Assay® is a rapid field or laboratory enzyme immunoassay method for the analysis of soil and water for remediation, assessment, and industrial testing.

Features:

• Rapid field testing procedure for analysis of soil and water samples
• Quantitative data results with excellent analytical precision
• Tests up to 50 samples at once
• Results available in approximately 60 minutes
• Magnetic particle immunoassay
• Training available
• EPA SW-846 method #4010

Test result type

• Quantitative, semi-quantitative or qualitative

Samples per kit

• 100 test kit (tests up to 80 samples)

Assay range

• Soil: 0.1 ppm to 10 ppm as pentachlorophenol
• Water: 0.1 to 10.0 ppb as pentachlorophenol
• Other applications are also available
• Range can be extended with additional dilutions

Sample preparation

• Soil samples require prior extraction using the sample extraction kit (sold separately).
• The sample extraction kit provides materials for 12 soil sample extractions with alkaline methanol.

Sampling time

• Soil extraction time is typically two minutes per sample plus assay run time of approximately 60 minutes.

Specificity

The PCP RaPID Assay® immunoassay test does not differentiate between PCP and other organochlorines. The table below shows compounds at the limit of quantitation (LOQ)- an approximate concentration required to yield a positive result at the lowest standard. The IC50 isthe concentration required to inhibit one-half of the colour produced by the negative control. It is also used to calculate cross-reactivity values to similar compounds.

Basic Test Procedure

• Add prepared sample, enzyme conjugate, and antibody coupled magnetic particles.Vortex
• Incubate for 30 minutes
• Separate using the RaPID magnetic separator. decant and wash
• Add colour solution and incubate for 20 minutes
• Stop the reaction and read colour at 450 nm
• Quantitive results and QC parameters are calculated and printed automatically using the RPA-1I spectrophotometer

Test kit components

• Antibody coated magnetic particles for analysis of 100 test tubes
• Zero standard, wash, enzyme conjugate, colour development and stop reagents
• Standards for 0.1, 2 and 10 ppb as PCP
• Kit control as 1.0 ppb as PCP
• Disposable test tubes
• Test kit instructions

Storage & precautions

• Shelf life is typically one year from date of manufacture, with specific kit expiration date information provided on product packaging
• Reagents must be stored at 39° to 46°F (4° to 8°C) when not in use
• Store at ambient temperature 64° to 81°F (18° to 27°C) for up to eight hours
• Kits must be brought to 64° to 81°F (18° to 27°C) before use
• Do not expose colour solution to direct sunlight
• Portable spectrophotometer battery should be charged prior to use

Required test materials

• PCP 100 tube test kit (A00111)
• Sample extraction kit (A00128EA)
• PCP sample diluent(as needed) (A00113)

Required test equipment

• RaPID Assay accessory kit which contains (6050100 (P)/6997010 (R)): RPA-I1 RaPID analyser (6000111), Magnetic separation rack (A00004), Repeator pipet (A00008), Adjustable volume pipet (A00176), Vortex mixer (A00014), Portable balance (A00131), Digital timer (A00015)
• Repeator pipet tips (A00009)
• Adjustable pipet tips (A00013)

Other recommended materials

• Latex gloves
• Liquid and solid waste containers
• Calculator
• Absorbant paper for blotting
• Marking pen

ATP Reagent shelf life is 1 year (refrigerated)

SX610 pH Pen Tester, Suitable for Test Tube pH Testing by Apera

The Apera Instruments SX610 pH Pen Tester is featured with reliable measuring performance with a single-button operation in a slim body. A cost-effective choice for your regular pH testing, including hydroponics, water treatment, education, pools & spas, and so on. The pH probe is replaceable and suitable for test tube measurements, which is especially good for educational use.

Easy Auto Calibration (1 point: 7.00 pH) with buffer recognition and 0 to 60°C Auto Temperature Compensation (ATC), ±0.1 pH/1.0°C accuracy with 0 to 14.0 pH measuring range. Intelligent functions: switch from °F to °C, automatic power-off, low battery alarm, pH probe invalidation reminder (remind you to replace the probe for better performance).

The meter comes with a complete kit of premixed calibration solutions (7.00 pH), storage solutions (3M KCL), CR2032 lithium batteries all in a portable carrying case. IP57 waterproof and dustproof floats on water, so you don't have to worry if it falls into the water by accident.

CE-Certified with a 2 year warranty for the meter and 6-months for the probe.

• Easy SINGLE-Button Operation, Smallest Pen-Style design with replaceable probe (good for test tube measurements)
• AUTO Calibration with auto buffer recognition; Auto Temperature Compensation (ATC) ensures accuracy in variant temperatures (0-60°C)
• COMPLETE KIT with READY-TO-USE calibration solution, KCl storage solution, and batteries in a portable carrying case
• Intelligent functions: temperature unit switch from F to C, automatic power-off, low battery alarm, and pH probe invalidation reminder
• AUTO RECOGNITION and REMINDER of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement

PH60F Premium pH Pocket Tester for Surface Testing by Apera

The Apera Instruments PH60F Pocket pH Tester simply tests ph level for skin, fabrics, paper, and other surface in an ACCURATE, QUICK, & REILABLE manner (Also works great for regular aqueous solution's pH testing). The flat probe has a Triple-Junction structure that prevents clogging, and is replaceable.

Up to 3 points (4.00, 7.00, 10.01) of Auto Calibration with auto buffer recognition and 0 to 50°C Auto Temperature Compensation (ATC), ±0.01 pH, 0.5°C accuracy with -2.00 to 16.00 pH measuring range, auto recognition and reminders of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement (auto hold function available).

Equipped with a large clear LCD with 3 backlit color (blue for measuring mode, green for calibration mode, red for heads-up) supports dual display of temp./pH value and indications of completed calibrations (where L/M/H indicate 3 points of calibrations) and stable readings (with a smiley face).

Unique High/Low Value Heads-Up function: the screen will turn red if measurement is higher/lower than a preset value, instantly reminding you of any results that need your attention.

Great value---Comes with a complete kit of premixed calibration solutions (4.00 and 7.00), soaking solutions (3M KCL), calibration bottles, AAA batteries, and a lanyard all in a portable carrying case.

Easy menu setting, customizing your tester's functions according to your needs. Smart self-diagnosis, warning of out-of-range measurement and incorrect calibrations. IP67 waterproof and dustproof, floating on water so you don't have to worry if it falls into water by accident. 2000 hours' continuous operation (without backlit) powered by AAA batteries (with low power warning and auto power off in 8 min if no operation).

The meter is CE certified and comes with a 2-YEAR Warranty (6 months for the probe). The company designs and manufactures scientific analytical instruments like meters and sensors for pH, conductivity, turbidity, and dissolved oxygen for over 25 years, and meets ISO 9001:2008 Standards.

• Easy-to-install Replaceable FLAT sensor, Triple-Junction structure prevents clogging, designed for Skin, Fabrics, Paper, and other flat surface pH testing, also works great for micro-volume and regular liquid pH measurement
• Easy Auto Calibration with auto buffer recognition (1 to 3 points); Auto Temperature Compensation (ATC)
• Unique High/Low Value HEADS-UP function, instantly reminding you of any results that need your attention with a red backlight
• LARGE CLEAR LCD with 3 backlit color (indicating 3 different modes), DUAL display of temp./pH, and REMINDERS of completed calibrations and stable readings
• COMPLETE Kit with READY-TO-USE calibration buffer solutions, calibration bottles, storage solutions, AAA batteries, and a lanyard all in a portable carrying case

TK6245-Z Boiler Water Combination Kit by AquaPhoenix

This Boiler Water Combination Test Kit combines 5 common test parameters into one, easy-to-use combination test kit. The kit is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions. Test parameters and ranges can be modified based on your specific needs.

Alkalinity, 1 drop = 10 ppm as CaCO3
Chloride, 1 drop = 10 ppm as Cl
Hardness, 1 drop = 2 or 10 ppm as CaCO3
Sulfite, 1 drop = 10 ppm as Na2SO3
Orthophosphate, 0 to 80 ppm as PO4

WCTK300 Water Conditioning Technician Kit by AquaPhoenix

The technicians kit is a complete field test kit designed for the water conditioning technician. This kit has reagents and equipment to test the incoming water and the effluent from the softener. Test include P & T Alkalinity, Hardness, Sulfide, Nitrate, Iron, Chlorine, pH and Conductivity / TDS. All of the items are housed in a durable and compact plastic case with a compartment to securely hold each item.

Kit Contains
Alkalinity, P&T Test, 1 drop = 10 ppm as CaCO3
Hardness Test, 1 drop = 1 gpg as CaCO3 and 1 drop =0.5 ppm as CaCO3
Iron Test, 0.5-10.0 ppm
pH, Wide Range Test, 5.0-10.0 pH
Chlorine, Free, Total and Combined Test, 0.2-3.0 ppm
Sulfide Test, 0.2-20.0 ppm
Nitrate Nitrogen Tablet Kit, 0-15 ppm
Conductivity Pen Meter

AZF848519 Microtox® FX Test System by Modern Water

Microtox® FX is a simple, rapid, extremely responsive, portable water quality test system. Designed for acute toxicity screening and adenosine triphosphate (ATP) testing, Microtox® FX uses bioluminescence technology to screen for contamination in instances of drinking water emergencies and chemical spills into water systems. Microtox® FX is the portable toxicity analyser used with the Microtox® technology

The Microtox® FX instrument has a combined detection capability that provides a very sensitive and rapid test to detect two of the most probable classes of agents; pathogens and toxic chemicals, that may accidently or intentionally contaminate drinking water or wastewater. Microtox® FX's acute toxicity and ATP detection capabilities make it the ideal instrument for rapidly and accurately assessing if the quality of drinking water, from the source to the tap, has been affected by an incident.

• Biological early warning system sensitive to more than 2,700 simple and complex chemicals
• Fast - Reliable results available in 5 minutes after initial sample preparation
• Test results highly correlated with other widely accepted toxicity test methods
• Excellent correlation with HPC test methods
• Fully portable - lightweight with sturdy field carrying case
• Battery life of up to 8 - 10 hours with typical use
• Compatible with widely available ATP test kits*
• Manufactured in a certified ISO 13485 quality system with 100% lot traceability

Microtox® FX is designed for use in any sample location throughout the water distribution or industrial waste water system. It is particularly suited to remote sites such as reservoirs, storage tanks, ocean or lake going vessels or in any hard to reach place.

Chemical contamination of drinking water and wastewater

Microtox® FX is the portable version of the industry-leading Microtox® Model 500 (M500) laboratory analyser. The Microtox® FX test is fast, simple to conduct, uses small sample sizes and is very cost effective. Results correlate well with those from other toxicity bioassays such as fish, daphnia and shrimp. Microtox® FX is used extensively in the measurement of toxicity of "fit for use" water and wastewater treatment effluent. It is also used as an early screening tool for relative toxicity as part of a test battery.

Microtox® FX test systems are uniquely suited for drinking water surveillance where supplies are monitored regularly and at strategic points. It can quickly reveal any changes in the level of toxicity of drinking water making it the ideal solution for major events. Microtox® has been deployed during the Summer Olympics beginning in 1984.

In industrial and municipal wastewater, Microtox® FX helps assure compliance with NPDES toxicity limits, measures toxicity in influent streams and determines treatment efficiency.

Microbial contamination of drinking water

Microtox® FX can rapidly estimate the microbial concentration of a drinking water sample to a level of 100 cfu/mL without additional filtration or incubation steps. The data is available in minutes and is highly correlated with standard heterotrophic plate count methods.

Microtox® FX is extremely responsive and has been designed for use in a wide variety of applications where it is crucial to rapidly determine the biomass of a sample.

Applications

• Drinking water monitoring
• Emergency response: Biological contamination
• Emergency response: Chemical toxicity
• Hazardous waste
• Industrial effluent
• Industrial process water
• Municipal effluent
• Recreational water
• Soil
• Sediments
• Storm water

Process explained

The Microtox® FX system performs a dual function; toxicity testing and determination of microbial contamination. The Microtox® FX test system uses a strain of naturally occurring luminescent bacteria called Aliivibrio fischeri to provide acute toxicity detection. The bacteria emit light as a natural part of their metabolism. Exposure to a toxic substance causes disruption of the respiratory process of the bacteria resulting in reduced light output. The Microtox® FX photometer measures the light levels before and after addition of the sample, and the reduction in light output is a measure of the toxicity of the sample.

All organisms contain ATP as their main energy source and the amount of ATP in a sample is directly proportional to the biomass of the sample.

ATP reacts with luciferin/luciferase, the enzyme system present in firefly tails, to produce light. In the reaction, each molecule of ATP produces one photon of light; the light output of this reaction can be accurately measured using the very sensitive Microtox® FX instrument.

Includes:

• Microtox FX Analyzer, w/Case
• Microtox SOLO Reagent: 50 vials
• Microtox Diluent: 1L
• Microtox Osmotic Adjusting Solution
• Adjustable Volume Pipette, 10-100 uL
• Adjustable Volume Pipette 100-1000 uL
• 10-100 uL Pipette Tips
• 100-1000 uL Pipette tips
• Disposable Glass Cuvettes (400)
• Cuvette Racks: set of 5
• Digital Lab Timer
• User Manual (USB)

AZF848522 Microtox® FX Test System, No SOLO by Modern Water

Microtox® FX is a simple, rapid, extremely responsive, portable water quality test system. Designed for acute toxicity screening and adenosine triphosphate (ATP) testing, Microtox® FX uses bioluminescence technology to screen for contamination in instances of drinking water emergencies and chemical spills into water systems. Microtox® FX is the portable toxicity analyser used with the Microtox® technology

The Microtox® FX instrument has a combined detection capability that provides a very sensitive and rapid test to detect two of the most probable classes of agents; pathogens and toxic chemicals, that may accidently or intentionally contaminate drinking water or wastewater. Microtox® FX's acute toxicity and ATP detection capabilities make it the ideal instrument for rapidly and accurately assessing if the quality of drinking water, from the source to the tap, has been affected by an incident.

• Biological early warning system sensitive to more than 2,700 simple and complex chemicals
• Fast - Reliable results available in 5 minutes after initial sample preparation
• Test results highly correlated with other widely accepted toxicity test methods
• Excellent correlation with HPC test methods
• Fully portable - lightweight with sturdy field carrying case
• Battery life of up to 8 - 10 hours with typical use
• Compatible with widely available ATP test kits*
• Manufactured in a certified ISO 13485 quality system with 100% lot traceability

Microtox® FX is designed for use in any sample location throughout the water distribution or industrial waste water system. It is particularly suited to remote sites such as reservoirs, storage tanks, ocean or lake going vessels or in any hard to reach place.

Chemical contamination of drinking water and wastewater

Microtox® FX is the portable version of the industry-leading Microtox® Model 500 (M500) laboratory analyser. The Microtox® FX test is fast, simple to conduct, uses small sample sizes and is very cost effective. Results correlate well with those from other toxicity bioassays such as fish, daphnia and shrimp. Microtox® FX is used extensively in the measurement of toxicity of "fit for use" water and wastewater treatment effluent. It is also used as an early screening tool for relative toxicity as part of a test battery.

Microtox® FX test systems are uniquely suited for drinking water surveillance where supplies are monitored regularly and at strategic points. It can quickly reveal any changes in the level of toxicity of drinking water making it the ideal solution for major events. Microtox® has been deployed during the Summer Olympics beginning in 1984.

In industrial and municipal wastewater, Microtox® FX helps assure compliance with NPDES toxicity limits, measures toxicity in influent streams and determines treatment efficiency.

Microbial contamination of drinking water

Microtox® FX can rapidly estimate the microbial concentration of a drinking water sample to a level of 100 cfu/mL without additional filtration or incubation steps. The data is available in minutes and is highly correlated with standard heterotrophic plate count methods.

Microtox® FX is extremely responsive and has been designed for use in a wide variety of applications where it is crucial to rapidly determine the biomass of a sample.

Applications

• Drinking water monitoring
• Emergency response: Biological contamination
• Emergency response: Chemical toxicity
• Hazardous waste
• Industrial effluent
• Industrial process water
• Municipal effluent
• Recreational water
• Soil
• Sediments
• Storm water

Process explained

The Microtox® FX system performs a dual function; toxicity testing and determination of microbial contamination. The Microtox® FX test system uses a strain of naturally occurring luminescent bacteria called Aliivibrio fischeri to provide acute toxicity detection. The bacteria emit light as a natural part of their metabolism. Exposure to a toxic substance causes disruption of the respiratory process of the bacteria resulting in reduced light output. The Microtox® FX photometer measures the light levels before and after addition of the sample, and the reduction in light output is a measure of the toxicity of the sample.

All organisms contain ATP as their main energy source and the amount of ATP in a sample is directly proportional to the biomass of the sample.

ATP reacts with luciferin/luciferase, the enzyme system present in firefly tails, to produce light. In the reaction, each molecule of ATP produces one photon of light; the light output of this reaction can be accurately measured using the very sensitive Microtox® FX instrument.

Includes:

• Microtox FX Analyzer, w/Case
• Microtox Diluent: 1L
• Microtox Osmotic Adjusting Solution
• Adjustable Volume Pipette, 10-100 uL
• Adjustable Volume Pipette 100-1000 uL
• 10-100 uL Pipette Tips
• 100-1000 uL Pipette tips
• Disposable Glass Cuvettes (400)
• Cuvette Racks: set of 5
• Digital Lab Timer
• User Manual (USB)

TK0159-Z Phosphonate Test Kit, 100 tests per kit by AquaPhoenix

EndPoint ID Drop Count Test Kit, Phosphonate

• 1 drop = 0.7 ppm as HEDP / 10 mL
• 1 drop = 2 ppm as PBTC / 10 mL

100 tests per kit

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information