Ultrarae 3000

012-3022-010 RAE-Sep™ Benzene Separation Tubes for UltraRAE Series Monitor (10 Tubes / Box) by RAE Systems

Use these tubes with the UltraRAE 3000 to test for specific compounds, including benzene in oil refinery processes, butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 photoionization detector equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Key Features

• Available for benzene and butadiene
• Compatible with 9.8eV PID in the UltraRAE 3000
• Benzene snapshot in 60 seconds
• Full STEL reading in 15 minutes

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

012-3024-010 RAE-Sep™ Butadiene Separation Tubes for UltraRAE Series Monitor (10 Tubes / Box) by RAE Systems

Use these tubes with the UltraRAE 3000 to test for specific compounds, including benzene in oil refinery processes, butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 photoionization detector equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Key Features

• Available for benzene and butadiene
• Compatible with 9.8eV PID in the UltraRAE 3000
• Benzene snapshot in 60 seconds
• Full STEL reading in 15 minutes

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

025-2002-010 Humidity Filtering II Tube (10 Tubes / Box) by RAE Systems

The Humidity Filtering II Tube dries the sample gas entering pumped instruments. It is particularly suited for removing humidity effects on photoionization detectors (PIDs) while making VOC measurements, and typically lasts for about a half hour of continuous readings. The Humidity Filtering II Tube utilizes a solid adsorbent to remove moisture without impacting the detection and measurement of most VOCs.

Key Features

• Enables continuous reading of VOCs under extremely humid conditions for about one half hour (per tube) at room temperature
• Prevents drifting readings at high humidity when the sensor is dirty.
• Attaches to the Flex-I-Probe™ inlet with the same adapter used for ppbRAE 3000 VOC zeroing tubes.
• Especially useful for measuring chlorinated solvents and fuels under high humidity conditions as are often encountered during soil and water remediation.
• Can be used with other instruments having a built-in pump such as MiniRAE Lite, ppbRAE 3000, UltraRAE 3000, MultiRAE Lite, MultiRAE and MultiRAE Pro when humidity is an issue, when using a PID or making low-level LEL sensor measurements.
• Caution: Absorbs some compounds such as ammonia and slows the response of heavy compounds, especially at low concentrations or low temperatures.

Applications

• Soil and water remediation
• VOCs in landfill sites

059-D31D-000 UltraRAE 3000+ Portable Handheld Compound-Specific VOC Monitor - BLE, CSA, PID 9.8 eV lamp 1/2" with 10 RAE-Sep Tubes for Benzene, Rechargeable Li-Ion Battery, Universal Adapter, Monitor only by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

059-D310-200 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor - 9.8 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

059-D312-300 UltraRAE 3000+/9.8eV with 10 RAE-Sep&trade Tubes for Benzene/Rechargeable/Wireless Mesh/Accessory kit (No gas) by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

059-D312-000 UltraRAE 3000 Portable Handheld Monitor by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

059-D31D-200 UltraRAE 3000+ Portable Handheld Compound-Specific VOC Monitor - CSA, PID 9.8 eV lamp 1/2" with 10 RAE-Sep Tubes for Benzene, BLE Data Transmission, Rechargable Li-ion Battery, Benzene Cal Kit by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

012-3022-010 RAE-Sep™ Benzene Separation Tubes for UltraRAE Series Monitor (10 Tubes / Box) by RAE Systems

Use these tubes with the UltraRAE 3000 to test for specific compounds, including benzene in oil refinery processes, butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 photoionization detector equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Key Features

• Available for benzene and butadiene
• Compatible with 9.8eV PID in the UltraRAE 3000
• Benzene snapshot in 60 seconds
• Full STEL reading in 15 minutes

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

059-D310-200 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor - 9.8 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

029-0695-000 RAELink3 Mesh Modem Kit by RAE Systems

The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center's PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth® connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3.

RAELink3 Communication Kit

RAELink3 Communication Kit enables communication between a variety of RAE Systems' wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices.

RAE Systems Compatible Monitors

• GammaRAE II R Personal Radiation Detector
• MiniRAE 3000, ppbRAE 3000 and UltraRAE 3000 Photoionization Detectors
• AreaRAE Steel

RAELink3 Communication Kit Includes

• RAELink3 modem equipped with GPS, Bluetooth, and long-range radio
• Rugged antenna
• Charging adapter and AC/DC adapter alkaline battery pack
• Hard transport case
• Quick reference guide and resource CD
• RS-232 cable (for connection to devices not equipped with Bluetooth)

Key Features

• GPS equipped for tracking and viewing sensors and personnel on a local mapping area
• Bluetooth-equipped for wireless connection option to monitors
• Long-range radio to transmit system information up to 2 miles (3 km) in urban setting
• Easily configure in the field to interface with other ProRAE Guardian networked monitors
• Programmable as a Host modem, to Repeater, to Remote modem as needed
• Backlit display with intuitive interface
• Radio strength indicator on LCD
• Weatherproof
• Shock resistant
• Up to 18 hours run time on single charge

Applications

• Incident Response
• Venue Protection
• Industrial Safety
• Perimeter Monitoring
• Confined Space Entry
• Pulp and Paper Industry
• Plant Turnarounds
• Marine and Offshore Wells

059-D311-200 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor - 9.8 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

059-D302-000 UltraRAE 3000+ Portable Handheld Compound-Specific VOC Monitor by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

029-0505-000 RAELink3 Kit by RAE Systems

The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center's PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth® connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3.

RAELink3 Communication Kit

RAELink3 Communication Kit enables communication between a variety of RAE Systems' wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices.

RAE Systems Compatible Monitors

• GammaRAE II R Personal Radiation Detector
• MiniRAE 3000, ppbRAE 3000 and UltraRAE 3000 Photoionization Detectors
• AreaRAE Steel

RAELink3 Communication Kit Includes

• RAELink3 modem equipped with GPS, Bluetooth, and long-range radio
• Rugged antenna
• Charging adapter and AC/DC adapter alkaline battery pack
• Hard transport case
• Quick reference guide and resource CD
• RS-232 cable (for connection to devices not equipped with Bluetooth)

Key Features

• GPS equipped for tracking and viewing sensors and personnel on a local mapping area
• Bluetooth-equipped for wireless connection option to monitors
• Long-range radio to transmit system information up to 2 miles (3 km) in urban setting
• Easily configure in the field to interface with other ProRAE Guardian networked monitors
• Programmable as a Host modem, to Repeater, to Remote modem as needed
• Backlit display with intuitive interface
• Radio strength indicator on LCD
• Weatherproof
• Shock resistant
• Up to 18 hours run time on single charge

Applications

• Incident Response
• Venue Protection
• Industrial Safety
• Perimeter Monitoring
• Confined Space Entry
• Pulp and Paper Industry
• Plant Turnarounds
• Marine and Offshore Wells

012-3024-010 RAE-Sep™ Butadiene Separation Tubes for UltraRAE Series Monitor (10 Tubes / Box) by RAE Systems

Use these tubes with the UltraRAE 3000 to test for specific compounds, including benzene in oil refinery processes, butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 photoionization detector equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Key Features

• Available for benzene and butadiene
• Compatible with 9.8eV PID in the UltraRAE 3000
• Benzene snapshot in 60 seconds
• Full STEL reading in 15 minutes

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

059-D311-200 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor - 9.8 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

029-0505-000 RAELink3 Kit by RAE Systems

The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center's PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth® connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3.

RAELink3 Communication Kit

RAELink3 Communication Kit enables communication between a variety of RAE Systems' wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices.

RAE Systems Compatible Monitors

• GammaRAE II R Personal Radiation Detector
• MiniRAE 3000, ppbRAE 3000 and UltraRAE 3000 Photoionization Detectors
• AreaRAE Steel

RAELink3 Communication Kit Includes

• RAELink3 modem equipped with GPS, Bluetooth, and long-range radio
• Rugged antenna
• Charging adapter and AC/DC adapter alkaline battery pack
• Hard transport case
• Quick reference guide and resource CD
• RS-232 cable (for connection to devices not equipped with Bluetooth)

Key Features

• GPS equipped for tracking and viewing sensors and personnel on a local mapping area
• Bluetooth-equipped for wireless connection option to monitors
• Long-range radio to transmit system information up to 2 miles (3 km) in urban setting
• Easily configure in the field to interface with other ProRAE Guardian networked monitors
• Programmable as a Host modem, to Repeater, to Remote modem as needed
• Backlit display with intuitive interface
• Radio strength indicator on LCD
• Weatherproof
• Shock resistant
• Up to 18 hours run time on single charge

Applications

• Incident Response
• Venue Protection
• Industrial Safety
• Perimeter Monitoring
• Confined Space Entry
• Pulp and Paper Industry
• Plant Turnarounds
• Marine and Offshore Wells

059-D302-300 UltraRAE 3000+/9.8eV with 10 RAE-Sep™ Tubes for Benzene/Alkaline/Wireless Mesh/Accessory kit (No gas or regulator) by RAE Systems

The UltraRAE 3000+ is one of the most advanced Compound-Specific Monitors on the market. Its Photoionization Detector's (PID) extended range of 0.01 to 10,000 ppm in VOC mode and 10 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

• Dual detection mode for total benzene exposure assessment: 60-second snapshot or 15-minute STEL measurement
• High sensitivity to benzene provides a lower detection range for future benzene exposure limits
• Lower risk of false alarms through advanced speciation method
• Total VOC measurement mode with extended range of 0.01 to 10,000 ppm

FEATURES & BENEFITS

• Versatile VOC or Benzene-Specific modes
• Cost effective solution and low-cost RAE-Sep™ tubes
• Reflex PID Technology™
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• Built-in humidity sensor with Automatic temperature-controlled sampling time calculation
• See-through Sampling probe design for instant tubebreakthrough visibility
• Highly connectivity capability through multiple wireless module options
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools

APPLICATIONS

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

MONITOR ONLY INCLUDES:

• UltraRAE 3000+ Monitor, Model PGM-7360
• Wireless communication module built-in
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DCcharger and international plug kit
• Soft leather carrying case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

059-D310-000 UltraRAE 3000 Portable Handheld Compound-Specific VOC Monitor - 9.8 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The UltraRAE 3000 is the most advanced Compound-Specific Monitor on the market. Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications, from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Monitor only includes

• UltraRAE 3000 Monitor, Model PGM-7360
• Wireless communication module built-in
• Datalogging with ProRAE Studio II Package for Windows® XP, Windows® Vista, or Windows® 7
• Travel Charger
• RAE UV lamp and RAE-Sep™ Tubes
• Flex-I-Probe™ and short probe
• External filter
• Red rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Lithium-ion (Li-Ion) battery with universal AC/DC charger and international plug kit
• Operation CD-ROM
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with Accessories Kit

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional Calibration Kit

• Calibration gas, 34L, as specified
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response in VOC mode or 60 seconds in compound-specific mode
• Extended range up to 10,000 ppm (in VOC mode) with improved linearity
• Built-in humidity sensor
• Automatic temperature-controlled sampling time calculation
• Highly specific readings, combining a 9.8eV UV lamp and RAE-Sep™ benzene tube
• New sampling probe design provides instant tube-breakthrough visibility
• Versatile VOC or Benzene-Specific modes
• Real-time wireless built-in Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated RAE Systems Correction Factors list for more than 200 compounds
• Large graphic display
• Multi-language support
• Easy access to lamp, sensor and battery in seconds without tools
• Inexpensive analysis using low-cost RAE-Sep tubes

Application

• Confined space entry pre-screening during refinery and plant maintenance
• Hazardous material response
• Marine spill response
• Refinery down-stream monitoring
• Plant overhaul

029-0695-000 RAELink3 Mesh Modem Kit by RAE Systems

The RAELink3 modem allows integration of many RAE Systems gas and radiation monitors, and select third-party devices into a wireless detection system. Monitors linked with a RAELink3 modem can communicate sensor data and GPS coordinates to a command center's PC running ProRAE Guardian software up to 2 miles (3 km) away. Bluetooth® connectivity, a user-friendly display and easy-to-use menu simplify the configuration and use of the RAELink3.

RAELink3 Communication Kit

RAELink3 Communication Kit enables communication between a variety of RAE Systems' wireless monitors and ProRAE Guardian. Custom RAELink3 Communication Kits are also available for select third-party devices. Check the RAE Systems web site for the latest listing of compatible third-party devices.

RAE Systems Compatible Monitors

• GammaRAE II R Personal Radiation Detector
• MiniRAE 3000, ppbRAE 3000 and UltraRAE 3000 Photoionization Detectors
• AreaRAE Steel

RAELink3 Communication Kit Includes

• RAELink3 modem equipped with GPS, Bluetooth, and long-range radio
• Rugged antenna
• Charging adapter and AC/DC adapter alkaline battery pack
• Hard transport case
• Quick reference guide and resource CD
• RS-232 cable (for connection to devices not equipped with Bluetooth)

Key Features

• GPS equipped for tracking and viewing sensors and personnel on a local mapping area
• Bluetooth-equipped for wireless connection option to monitors
• Long-range radio to transmit system information up to 2 miles (3 km) in urban setting
• Easily configure in the field to interface with other ProRAE Guardian networked monitors
• Programmable as a Host modem, to Repeater, to Remote modem as needed
• Backlit display with intuitive interface
• Radio strength indicator on LCD
• Weatherproof
• Shock resistant
• Up to 18 hours run time on single charge

Applications

• Incident Response
• Venue Protection
• Industrial Safety
• Perimeter Monitoring
• Confined Space Entry
• Pulp and Paper Industry
• Plant Turnarounds
• Marine and Offshore Wells