Microtox Analyzer

OilView® Quick-Check Analyzer

Because fast answers are often critical to your maintenance needs, the OilView® in-shop oil analysis system provides useful and fast results to help you solve lubricant related problems quickly.

The OilView® Quick-Check Analyzer is easy to use. Test results are available in 1 minute and are easily interpreted. The knowledge you gain quickly translates to longer equipment life and condition based intervals between oil changes.

With the OilView® Quick-Check, your staff develops valuable in-house experience and saves time and money.

OilView® helps you make informed decisions by providing data in three critical categories: oil degradation, oil contamination, and machine wear.

Data management capabilities such as reporting and trending are available with included PC software. A PC is not required to perform tests.

The OilView® Quick-Check Analyzer includes:

• Oil Analyzer
• 1 Oil Sensor Grid
• Oil Sample Pump
• Carrying Case
• 1 year warranty on hardware
• One set of calibration fluids, 220 and 300
• Communication Cable
• PC software (not required for operation)

Features:

• Easy to use
• Provides fast information on contamination, degradation, and equipment wear
• Helps you make timelydecisions about lubricant problems

707 Carbon Monoxide Analyzer by Test Products International

Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use.

Test flue gasses at home or office spaces for the presence and location of CO leaks. With a protective rubber boot, the new 707 fits comfortably in your hand and operates with the push of a button.

The TPI 707 Carbon Monoxide Analyzer is a state of the art, easy to use analyzer designed to display carbon monoxide levels in and around appliances and work / living spaces. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up if the date of calibration is one year or older.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensor in your analyzer is warranted for two years. This warranty does not cover a sensor damaged through misuse of the analyzer.

Features

• Clear and fast response with advance pump driven technology
• Peak Hold to capture peak CO reading
• Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
• Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
• 1 ppm sensitivity
• Measures up to 10,000ppm
• Push on fittings are fast and easy to use
• Large easy to read backlit display
• Advanced electrochemical sensor is field replaceable and calibrateable
• Protective rubber boot and soft carrying case with shoulder strap is included
• Pump driven
• Pump flow block indicator
• Auto zero

Applications

• Ambient CO safety checks
• Checking flue gasses at home or office spaces for the presence and location of carbon monoxide

TPI 707 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 707 Instrument
• Rubber Boot (A765)
• Soft Carrying Case (A787)
• Flue Sampling Probe (A69)
• In-Line Filter assembly installed on Flue probw (A794)
• Mini Pump Protection Filter Assembly and spare filters (A763)
• Exhaust Spigot (removable) (A764)
• Instruction Manual

TPI 707 Flue Gas Analyzer has the following options available:

• Infrared printer (A740)
• Spare In-Line Filter (A794F is a package of 5 filters)
• Spare Water Block Filter (A794W is a package of 1 filter).

706 High CO Analyzer by Test Products International

Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button.

The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

The 706 is utilizes an advanced long life electrochemical sensor that can be field calibrated and has a low replacement cost.

Features include IR printer port to print hard copy of data, 10 storage locations, Flow block indication, peak reading for test period as well as date and time.

Features

• Pump driven for fast response
• Store function to save up to 50 readings
• Will not shut off if 15 ppm CO is present for increased safety
• Push on fittings for fast and easy use
• Optional A740 IR printer available for hard copies of test results
• Large easy to read backlit display

Applications

• Check forklift exhaust gases for the presence and location of carbon monoxide

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Range: 0 ~ 9,999ppm <10,000ppm: 1.000 ~ 9.999%
• 1 ppm sensitivity
• Pump driven
• Auto zero

6309PDTF pH/Temp/DO Analyzer Meter by Jenco

• Graphic LCD with manual backlight displays pH, dissolved oxygen,temperature, relay status and transmitter current mA output simultaneously.
• Automatic buffer recognition of US and European buffer sets.Calibration data is stored in memory and is ready for use on power up.
• Isolated and reversible 4-20 mA current output for pH/ dissolved oxygen allows it to be used as a proportional output.
• 5 programmable on/off relays: 2 for pH, 2 for dissolved oxygen and 1 for temperature.
• RS-485 output for remote access via an compatible computer allows multiple units to be connected and ganged together.
• Password protection.
• IP65 watertight case.

700 Portable Compliance-Level Combustion Emissions Analyzer by Enerac

Enerac brings you the model 700 The most accurate, reliable, rugged and affordable multi parameter, compliance level, portable combustion analyzer. The Enerac 700 is unmatched in versatility. It is designed to help you meet the challenges of a rapidly changing regulatory environment.

Compact/Rugged

The Enerac Model 700 is handheld, weighs 6 lbs and is easy to operate (no technical expertise is needed). The Model 700 units are rugged, made with a metal case and considered the workhorse of the industry withstanding years of use and abuse. No one makes a more affordable, accurate, rugged, reliable and sophisticated portable combustion emissions analyzer than Enerac. Enerac custom builds all units and can engineer sensor ranges and options to customer requirements for their respective application(s) at hand.

Versatile

The Enerac Model 700 is used for a vast array of applications. The most common applications are those related to combustion sources, such as Boilers, Burners, Engines, Turbines, Generators, Kilns, Dryers, Heaters, Ovens to name a few. The Enerac Model 700 is also of interest to Scientists and their respective combustion/emissions experiments typically found at the University research environment as well as in the private sector.

User Friendly

The Enerac Model 700 units have easy access for replacing sensors in the field. The back of the unit has easy thumb screws to pop off the back plate. Once the back plate is off, the sensors are easy to see and pop in and out. These sensors are field replaceable (the unit does not need to be sent back to the factory for sensor replacement). The Model 700 also has the ability to be field calibrated without having to send the unit back to the factory! Free factory tech support is always available if need be.

Compliance Level

The Enerac Model 700 is fully upgradeable (one can order new sensors and options to the same unit over time). The Model 700 also has a standard sample conditioning system (thermoelectric condenser also called a peltier cooler) necessary for the proper detection and measurement of both NO2 and/or SO2 gasses. The Model 700 also has proper control over the NO sensors tendency to drift over time with increasing ambient temperatures. The Enerac Model 700 s NO SEM sensor incorporates a proprietary temperature control system designed to automatically hold the nominal filter and sensor temperatures at < 30 degrees C. This ultimately prevents rising measurement data drift and maintains the actual lower readings of the NO (NOx). This in turn prevents one from overstating one s NO (NOx) emissions.

The Enerac Model 700 combines a high quality tubing (Viton hose with its specific dimensions and flow rate) along with an accurate and reliable conditioning system (peltier cooler) with the additional benefits of the extremely accurate SEM sensors. The result is a Compliance-Level Emissions Analyzer that produces reliable, accurate data in the palms of your hands.

The Enerac Model 700 is perfect for gathering extremely accurate and reliable data for internal needs as well as for the necessary emissions reporting requirements for local, district, county, state and federal agencies. The Model 700 Is perfect for S.C.A.Q.M.D. compliance requirements (and the other CA districts) EPA compli-ance tests (i.e. ctm 30, ASTM 6522, ctm 34, for CO, (NOx) requirements etc.), method 2 (stack gas velocity), and method 25B (Hydrocarbons).

Communications

The Enerac Model 700 comes with 500 internal storage buffers for storing collected data during a testing event. With Enerac s free Enercom software, one can use during the testing event or download the stored data at a later date. There is a serial port (RS 232 port), USB port and Blue tooth for communicating with your Enerac Model 700 and your computer.

Enerac Model 700 Base unit Includes

O2 (Oxygen), CO (Carbon Monoxide) SEM Sensor Dual Range (Dual range is not available if Combustible Sensor is Selected), Draft (not available with pitot tube/velocity option), Combustibles (not available with NDIR opt.), Stack & Ambient Temperature, Computes Efficiency, CO2 & Excess air.; with a 4&8 line 128 x 64 pixel dual display with backlight, Emissions Calculation, Auto Zero, RS-232 Port, USB port, Rechargeable Battery, AC Adapter, Built-In Printer, Storage (400 Complete Test Printouts), Blue Tooth, Enercom Software cd, Travel Case, in-line filter, roll of printer paper, manual, Calibration Certificate and a Two Year Warranty on the Unit and a Two Year Warranty (Pro-Rated) on the Sensors

*Please note we can only ship RKI products to customers within the United States