Carbon Monoxide

770 Carbon Monoxide Monitor by Test Products International

The 770 CO Single Gas Monitor is a state-of- the-art Carbon Monoxide Instrument designed to measure Carbon Monoxide in ambient air and to perform a carbon monoxide build up test . It has a measurement range of 0 to 999 ppm (parts per million) and displays the readings in 1ppm increments.

The unit features a personal audible and visual alarm, which is factory set at 30ppm CO but can be changed in the field to keep current with government legislation.

Other features include: maximum reading hold, elapsed time and manual zero. The audible alarm may be switched on and off as required. Battery changing is made easy by use of a simple slide off battery compartment cover.

The detector uses an advanced electrochemical sensor that measures Carbon Monoxide and should not be used for any other purpose.

When the audible alarm is switched off a small 'double speaker' symbol will be displayed at the bottom left of the LCD. When the alarm setting is exceeded a 'warning' symbol is displayed at the bottom center of the screen and the red warning indicator is illuminated. As the battery level approaches 2 volts a 'BAT' warning symbol is displayed to indicate low battery level. When the battery level gets too low the unit will automatically switch off.

Features

• Measure CO from O to 999ppm
• Displays the max. CO reading in PPM since power on
• Displays in hours and minutes, time elapsed since power on
• Displays user set value of audible and visual alarm
• The audible alarm can be switched on and off by pressing the SEL button

Applications

• Ambient CO safety checks

707 Carbon Monoxide Analyzer by Test Products International

Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use.

Test flue gasses at home or office spaces for the presence and location of CO leaks. With a protective rubber boot, the new 707 fits comfortably in your hand and operates with the push of a button.

The TPI 707 Carbon Monoxide Analyzer is a state of the art, easy to use analyzer designed to display carbon monoxide levels in and around appliances and work / living spaces. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up if the date of calibration is one year or older.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensor in your analyzer is warranted for two years. This warranty does not cover a sensor damaged through misuse of the analyzer.

Features

• Clear and fast response with advance pump driven technology
• Peak Hold to capture peak CO reading
• Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
• Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
• 1 ppm sensitivity
• Measures up to 10,000ppm
• Push on fittings are fast and easy to use
• Large easy to read backlit display
• Advanced electrochemical sensor is field replaceable and calibrateable
• Protective rubber boot and soft carrying case with shoulder strap is included
• Pump driven
• Pump flow block indicator
• Auto zero

Applications

• Ambient CO safety checks
• Checking flue gasses at home or office spaces for the presence and location of carbon monoxide

TPI 707 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 707 Instrument
• Rubber Boot (A765)
• Soft Carrying Case (A787)
• Flue Sampling Probe (A69)
• In-Line Filter assembly installed on Flue probw (A794)
• Mini Pump Protection Filter Assembly and spare filters (A763)
• Exhaust Spigot (removable) (A764)
• Instruction Manual

TPI 707 Flue Gas Analyzer has the following options available:

• Infrared printer (A740)
• Spare In-Line Filter (A794F is a package of 5 filters)
• Spare Water Block Filter (A794W is a package of 1 filter).

123-CO Gasflag Carbon Monoxide, 0-250ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

Part Number: BWS-M-LABEL

SCM4 Carbon Monoxide Detector by Fieldpiece

The SCM4 Carbon Monoxide (CO) Detector has a very fast reaction time, and measures CO in parts per million (ppm). Its electrochemical sensor is fast enough for walk-around tests. Features and benefits include: Field-replaceable CO sensor; Advanced three-pin sensor measures 0 to 1000 ppm CO; Calibrate / Zero SCM4 to ambient quickly with the ZERO button; Audio and visual alarms w/mute; Bright-blue, backlit dual-display with MAX and real-time measurements displayed; Magnetic hanger for hands-free operation; Auto Power-Off (APO).

The "Walk-Around" Test: The SCM4 responds to changes in CO levels in real time.

• Zero the unit outdoors away from any source of CO (will not zero if CO levels are higher than 5ppm)
• Enter the structure
• Walk around and watch the display
• Move toward the area of highest concentration to find the CO source

The SCM4 Carbon Monoxide Detector (CO Detector) offers several features and benefits to field technicians:

• Field-replaceable CO sensor: Easy to install; Lasts approximately two years; Comes pre-calibrated
• Fast electrochemical sensor helps you find CO sources like cracked heat exchangers or breached flue stacks
• Calibrate to ambient quickly with ZERO button
• Audio and visual alarms (with MUTE function)
• Alarm rate increases as carbon monoxide concentration increases
• MAX hold to help you zero in on the source
• Bright-blue backlit dual-display to test in dark crawl spaces
• Magnetic hanger for hands free testing
• Auto Power Off (APO) to save battery life (easy to disable)
• Battery check with % of battery life left displayed

Includes

• Carbon Monoxide Detector - SCM4
• 9V Battery (installed)
• Operator's Manual

ACM4 Carbon Monoxide Detector Accessory by Fieldpiece

The ACM4 is a carbon monoxide detector (CO detector) accessory head for use with Fieldpiece modular instruments. It has a fast reacting electrochemical sesor specific designed to detect carbon Monoxide (CO). Use the ACM4 to hunt down sources of potentially life-threatening, poisonous gas. And easily replace the sensor in the field when necessary.

Carbon monoxide (CO), a product of combustion is an oderless, colorless gas. Faulty combustion equipment is one source of this dangerious gas known as the "silent killer".

The ACM4 carbom monoxide detector measures CO in parts per million (ppm). Use it for walk-around tests to help pinpoint sources of CO indoors..

CO Exposure Effects

The ACM4 Carbon Monoxide Detector (CO Detector) offers several features and benefits to field technicians:

• Field-replaceable sensor
• Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges and our detachable leads.
• Fast electrochemical sensor helps you find CO sources like cracked heat exchangers or breached flue stacks.
• Calibrate to ambient quickly with ZERO calibration pot.
• Auto Power Off (APO) to save battery life (easy to disable).
• Battery check with % of battery life left displayed.
• Use with optional AOXP2 pump for flue gas testing.
• Display measurements smoothly (average) or real-time (normal)

Includes

• ACM4 Carbon Monoxide Detector
• Calibration Screwdriver
• 9V Battery (installed)
• Operator's Manual

CO10 Carbon Monoxide (CO) Meter by Extech

Features

• Ergonomic pocket size housing
• One button operation
• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• Audible alarm starting at 35ppm with continuous beeping when above 200ppm
• Backlight for low light conditions
• Max Hold and Data hold buttons
• Auto Power off
• Complete with 9V battery, protective rubber holster, and carrying case

Applications

• Ambient air safety checks on residential appliances
• HVAC service on furnaces and hot water heaters
• Home inspections
• Industrial environments where the accumulation of CO is possible

CO15 Carbon Monoxide (CO) Meter by Extech

Check CO levels up to 999ppm with the push of a button using Model CO15. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the display will flash until the CO level goes down to normal range. A backlight on the display can be used for low light areas. The meter comes complete with batteries, wrist strap, and pouch.

Features

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm
• Backlit display feature for easy viewing in dimly lit areas
• Auto power off after 15 minutes
• Low battery indicator
• Complete with 3 AAA batteries, wrist strap and pouch

Applications

• Ambient air safety checks on residential appliances
• HVAC service on furnaces and hot water heaters
• Home inspections
• Industrial environments where the accumulation of CO is possible

PS-RM04 Replacement Carbon Monoxide (CO) Sensor

BW Technologies Replacement Carbon Monoxide Sensor

BW Technologies designs, develops, and manufacturers a wide range of replacement sensors for BW Technologies products. The BW sensors are reliable, dependable, and compatible with a variety of BW Technologies instruments. This plug in replacement carbon monoxide sensor detects carbon monoxide gases in a range of 0 to 1000 Ppm. To determine which sensor type is compatible with your BW Technologies device, consult your product specification sheet.

Part Number: SRM04SC