Fm001

FM001 Flow Meter, 0.1-1.0 gpm (.5-4.0Lpm) by Sensorex

Our FM001 Water Flow Regulator allows for simple flow control. It is recommended for usage with the FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors when integrated with the FC72 Flow Cell. This Flow Regulator provides precision flow control from 0.1 to 1.0 gpm (0.5 to 4.0 l/min) with a 94% accuracy rate (full-scale range).

• Facilitates high-accuracy measurements: Controls flow for optimal measurement of free chlorine and/or chlorine dioxide
• Precision flow control: Controls flow from 0.1 to 1.0 gpm with a 94% accuracy
• Simple installation: Integrate the flow regulator into your system in less than 5 minutes
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

CLD502 Amperometric Chlorine Dioxide Sensor, 0-2 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD502-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD505 Amperometric Chlorine Dioxide Sensor, 0-5 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD505-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-5 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD510 Amperometric Chlorine Dioxide Sensor, 0-10 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD510-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-10 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

FCL502 Amperometric Free Chlorine Sensor, 0-2 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL502-MA Free Chlorine Sensor, 4-20 mA output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL502-MB Free Chlorine Sensor, 485 Modbus output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL502-MB1 Free Chlorine Sensor, 0-2 ppm MB 485 12V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL502-MB2 Free Chlorine Sensor, 0-2 ppm MB 485 24V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL505 Amperometric Free Chlorine Sensor, 0-5 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL505-MA Free Chlorine Sensor, 4-20 mA output, 0-5 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL505-MB Free Chlorine Sensor, 485 Modbus output, 0-5 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL505-MB1 Free Chlorine Sensor, 0-5 ppm MB 485 12V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL505-MB2 Free Chlorine Sensor, 0-5 ppm MB 485 24V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL510 Amperometric Free Chlorine Sensor, 0-10 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL510-MA Free Chlorine Sensor, 4-20 mA output, 0-10 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL510-MB Free Chlorine Sensor, 485 Modbus output, 0-10 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL510-MB1 Free Chlorine Sensor, 0-10ppm MB 485 12V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL510-MB2 Free Chlorine Sensor, 0-10ppm MB 485 24V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL520-MA Free Chlorine Sensor, 4-20 mA output, 0-20 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL520-MB Free Chlorine Sensor, 485 Modbus output, 0-20 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte