Testo

Measuring Range: -20 to +70°C

0560 7236 720 RTD Thermometer (Ex version) by Testo

Ex-Pt 720 is a highly accurate measuring instrument for fast and exact temperature measurements in areas with danger of explosion up to Zone 0. The large measuring range and the precise four-wire technology make the Ex-Pt 720 the ideal measuring instrument for monitoring measurements.

The instrument is authorized according to European as well as US norms. A broad probe range already covers most applications, on request you can obtain your own customized probe at short notice.

The carrying strap and the simple and easy-to-read large display provide additional security on site.

• Ideally suited to applications in areas with danger of explosion
• Very high accuracy
• Wide selection of probes
• Your customized probe at short notice
• Permits accoring to European and US norms
• Including carrying strap

Measuring Range: - 20 to +70°C
Measuring Range: 0 to +100 %RH

Dimensions: 400 x 310 x 96 mm

0699 6446/7 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

Measuring Range: -20 to +70°C

0572 1767 176 P1 5-Channel Temperature/RH/Pressure Logger with Internal Absolute Pressure Sensor and External Connection for temp/RH probe by Testo

When the ambient conditions, for example in a laboratory, need to be documeted securely and highly accurately, then the testo 176 P1 is the right data logger. It has an internal absolute pressure sensor and connection possibilities for two external humidity probes.

• Waterproof according to IP 54
• integrated USB and SD card interface for reading out data
• Highly accurate and secure documentation of the ambient conditions e.g. in a laboratory
• Internal absolute pressure sensor and connection possibility for two external humidity probes

0560 5280 526-1 Differential Pressure Meter (0 to 2000hPa/ 29psi, 0-1% acc.) by Testo

testo 526 is the differential pressure meter for industrial applications. Critical processes can be measured and monitored efficiently with an accuracy of up to 0.05% of the full-scale value.

• Temp. compensated differential pressure sensor, 0 to 2000 hPa, integrated in instrument
• Available in 2 accuracy classes: 0.1% / 0.05% of full-scale value
• Measures leakage rate (pressure drop per time)
• Checks drop in pressure in containers, cables etc. via the built-in test menu
• 2 probe sockets to connect additional probes for measuring pressure, temperature, current/voltage

Measuring Range: 0 to +500 ppm CO

0560 6160 616 Wood/Material Moisture Meter (non-penetration) by Testo

The testo 616 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destructive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The testo 616 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces.

• Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick
• Measurement depth up to 5 cm
• Handy shape for optimum contact pressure
• Hold, max., min. function
• Illuminated digital display
• Characteristics curves were developed in cooperation with the LPI institut
• Advantageous for measurements on exotic woods: non-destructive determination of wood moisture

Measuring Range: -50 to +150 °C

Measuring Range: -10 to +80 °C; 0 to +14 pH

0560 8311 830-T1 IR Thermometer, 10:1 optics & laser point by Testo

The testo 830 is a universally applicable infrared thermometer for non-contact measurement of surface temperatures in trade and industry. Thanks to a new processor, and therefore better resolution, even more precise measurements are now possible. Temperature can now be recorded to an accuracy of 0.1 °C. Thanks to the min./max. function, the limit values of the last measurement can be displayed and even better monitored.

• 10:1 focus
• Backlit display
• Audible/visual alarm
• Emissivity adjustable from 0.2 to 1.0
• Fast readings
• Laser sighting
• Adjustable alarm limits
• Audible and visual alarm if limits are exceeded
• User-friendly thanks to "pistol design"
• Backlit display
• Adjustable emission factor (0.1 to 1.0)
• Display of current value and Hold value

Measuring Range: -58 to +302°F