Testo

400563 4170 417 Large Vane Anemometer Kit by Testo

The compact testo 417 anemometer with built-in flow/temperature vane Ø 100 mm to measure flow speed, volume flow and temperature. Volume flow is shown directly in the display. Accurate volume flow calculation thanks to easy input of duct area. In addition, it is easy to switch to the current temperature reading. The flow direction, i.e. drawn in or blowing, is visible in the display. Timed and multi-point mean calculation provide information on mean volume flow, flow speed and temperature readings. The optional funnel set facilitates efficient measurements at ventilator grilles and disc outlets. Min/max values can also be shown in the display. Current readings can be frozen in the display using the Hold function.

Kits includes:

• 0560 4170 - 417 Large Vane Anemometer
• 0516 0210 - Soft carrying case - small

• Direction of flow recognition
• Temperature, flow and volume flow measurement
• Multi-point and timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto Off function
• Built-in Ø 100 mm vane

Measuring Range: -50 ... +120 °C

0560 8763 876 Thermal Imager Kit by Testo

With the thermal imager testo 876, you keep the flexible rotatable fold-out display in view when taking thermographic measurements in any position, securely reaching every corner. This allows you to identify anomalies and weak spots completely non-intrusively in buildings, mechanical components, photovoltaic systems or switching cabinets. For you, that means a better overview, providing more security when measuring thermographically.

• Detector size 160 x 120 pixels: With 19,200 temperature measurement points, the measurement objects are detected in very good image quality, clearly and precisely.
• Super Resolution technology to 320 x 240 pixels: Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexible fold-out, rotatable display
• Thermal sensitivity < 80 mK: Thanks to an excellent temperature resolution of < 80 mK, even small temperature differences are visible.
• Integrated digital camera: Parallel to the thermal image, a real image of each measurement object is also stored.
• Voice recording using headset: Voice recording allows each thermal imager to be recorded with a comment. This valuable information is stored together with the thermal image.
• Solar mode: For each measurement, the sun irradiation value can be entered into the camera. This value is stored for each thermal image.
• Special measurement mode for detecting areas with danger of mould: Using the externally measured ambient temperature and air humidity, as well as the surface temperature, the humidity value of each measurement point is caculated and shown in the display as areal humidity image.
• Exchangeable lenses
• Motor focus for one-hand operation

The thermal imager testo 876 is delivered in a robust case incl.

• Pro software
• Carrying strap
• SD card
• USB cable
• Lens cleaning cloth
• Headset
• Mains unit
• Li-ion rechargeable battery

0699 6446/1 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

6651 Temperature & Humidity Transmitter by Testo

Not all measurement problems can be solved with "simple" transmitters. The testo 6651 meets special challenges. When combined with the probe series testo 660x, the testo 6651 becomes the first choice in demanding air conditioning technology as well as in many other applications.

• Optimum adjustment concept thanks to adjustment of the entire signal chain incl. analog adjustment
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• Self-monitoring and early warning guarantee high system availability
• Calculation and presentation of the humidity parameters relative humidity absolute humidity and dewpoint.
• P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Display with multi-language display
• High-quality plastic housing

0699 6447/17 6447 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/12 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0560 1108 110 NTC Thermometer by Testo

The highly accurate, versatile testo 110 temperature measuring instrument is ideal for applications in rough conditions on account of its protective case, TopSafe. The engineering used is specially designed for measurements in refrigerated store rooms, cabinets and for outdoors. Minimum and maximum values are shown on a clear 2 line, backlit display or, if required, are printed on site on a Testo printer. In addition to the wide range of standard handheld probes available (optional), a wireless radio probe can be used simultaneously.

• Wireless measurement with radio probes possible (optional)
• Measurement data printout on site on Testo fast printer (optional)
• TopSafe, the indestructible protective case (optional)
• Audible alarm (adjustable alarm limits)
• Displays max/min readings in 2 line, backlit display
• Minimum/maximum value memory
• Large backlit display
• Auto-Hold automatically recognises full-scale value

Measuring Range: -50 to +350°C

0563 0314 Complete Pressure/Leak Test Set by Testo

Set includes:

• testo 312-3 pressure meter
• TopSafe for testo 312 Printer
• testo 316-1 gas leak detector
• TopSafe for testo 316-1
• Pressure drop test set 200 mbar
• testing pump
• single-pipe counter cap
• two valve T-fitting
• single valve barrier
• connection hose LW 6
• conical test plugs 1/2", 3/4"
• high pressure stage stops 3/8", 3/4", 1/2", 1"
• leak detection spray
• slide rule
• system case

0572 1753 175 T3 2-Channel Temperature Logger with External Thermocouple Connections (Type K,T) by Testo

The temperature must often be monitored and recorded in two places. With two interfaces for thermocouple probes (Type K and Type T), the testo 175 T3 is suited to this task. For example, in order to test the functionality of a heating system, the flow and return temperatures must be measured and documented. Refrigeration systems are tested in a similar way. In the autumn, the heating season begins, and with it the complaints from tenants that apartments cannot be heated to the desired extent. Using the testo 175 T3 and the versatile pipe clamp probes, you can take targeted measurements of the flow and return temperatures of individual radiators, in order to be able to identify and remedy causes (e.g. silting).

• Integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - large, easily legible display
• Simultaneous monitoring and recording of two temperature measurement sites
• Easy monitoring and documentation, e.g. of flow and return temperature of a heating system

6351 Differential Pressure Transmitter - standard housing plastic by Testo

The differential pressure transmitter testo 6351 was developed specially for monitoring differential pressure in the measuring range from 50 Pa to 2000 hPa. In cleanroom technology, the maintenance of positive pressure prevents the entry of contaminated air. In order to keep the cleanroom conditions constant, the transmitter additionally calculates the parameters volume flow and flow velocity from the measured differential pressure.

The testo 6351 is particularly outstanding thanks to the automatioc zero-point adjustment which ensures high accuracy and long-term stability.

The integrated self-monitoring and early warning function also guarantees the operator high system availability.

• Measurement of differential pressure, flow velocity and volume flow
• Automatic zero-point adjustment guarantees high, temperature-independent accuracy and long-term stability
• Plastic housing
• Display with multi-language operating menu and optical alarm display
• Ethernet, relay and analog outputs allow optimum integration into individual automation systems
• Self-monitoring of the transmitter and early warning function guarantee high system availablity
• The P2A software for parameterization, adjustment and analysis saves time and costs in commissioning and maintenance
• Scalability of ±50 percent of the measuring range final value and free scalability within the measuring range
• Configurable alarm management with adjustable response delay and alarm acknowledgement

Measuring Range: -60 to +400 °C

Measuring Range: -60 to +400 °C

0699 6446/13 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor