Testo

0560 5213 521-3 Differential Pressure Meter (0 to 2.5hPa) by Testo

Using testo 521-3 even the smallest differential pressures up to 250 Pa are measured. High accuracy and a resolution of 0.1 Pa mean the instrument is ideal for differential pressure measurements in clean rooms. When used with a Pitot tube, the internal pressure sensor measures flow speeds in the range 1 to 20 m/s.

• Temp. compensated differential pressure sensor built into instrument
• Calculation of velocity and volume flow via Pitot tube measurement
• Multi-point and timed mean calculation
• 2 probe sockets for pressure and temperature

0560 0511 511 Pocket Pro Absolute Pressure & Altitude Meter by Testo

testo 511 measures absolute pressure with an accuracy of +/-3 hPa. It is converted to barometric air pressure by entering on-site height above sea level. In addition, barometric elevation measurement between two points is also possible.

• Measures absolute pressure, e.g. for absolute pressure compensation in flow velocity measurements with a Pitot tube
• Calculation of barometric air pressure
• Barometric altitude measurement
• Accuracy +/-3 hPa
• Protective cap for safe storage
• Including wrist strap and belt holder
• Backlit display
• 8 switchable pressure units: hPa, mbar, Pa, mmH2O, mmHg, inH2O, inHg, psi

0699 6447/11 6447 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

400563 5604 Printer Upgrade Kit by Testo

Kits includes:

• 0554 0549 - Fast IR printer
• 0554 0568 - Thermal printer paper - 6 rolls (10 year legibility)

0560 9221 922 Dual Type K Thermometer by Testo

The differential thermometer records temperature values from 2 connected thermocouple probes and displays them simultaneously. The reading from an additional temperature probe can also be wirelessly displayed in the testo 922 measuring instrument; i.e. measurement data is transmitted by radio. Differential temperature can be called up immediately. Current measurement data such as max/min data can be printed on the Testo fast printer on site. It is possible to print measurement data once a minute, for example, on the printer if cyclical printing is in operation.

• 2 channel measuring instrument with optional radio probe
• Displays differential temperature
• Cyclical printing of readings, e.g. once a minute
• Continuous display of max/min values
• Hold button to freeze reading
• TopSafe, indestructible case, protects from dirt and impact (option)
• Display light
• On site printout on Testo fast printer

Measuring Range: -60 to 1000°C

0699 6447/13 6447 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

Measuring Range: -50 to +400 °C

0699 6446/17 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/3 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0572 1753 175 T3 2-Channel Temperature Logger with External Thermocouple Connections (Type K,T) by Testo

The temperature must often be monitored and recorded in two places. With two interfaces for thermocouple probes (Type K and Type T), the testo 175 T3 is suited to this task. For example, in order to test the functionality of a heating system, the flow and return temperatures must be measured and documented. Refrigeration systems are tested in a similar way. In the autumn, the heating season begins, and with it the complaints from tenants that apartments cannot be heated to the desired extent. Using the testo 175 T3 and the versatile pipe clamp probes, you can take targeted measurements of the flow and return temperatures of individual radiators, in order to be able to identify and remedy causes (e.g. silting).

• Integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - large, easily legible display
• Simultaneous monitoring and recording of two temperature measurement sites
• Easy monitoring and documentation, e.g. of flow and return temperature of a heating system

0563 8451 845 Adjustable Focus IR Thermometer with Aluminium Case and Humidity Module by Testo

For the first time, surface temperatures with smallest diameters can be measured accurately at short and long distances. The switchable optics for far-field and close focus measurement make this possible. Far-field measurements are carried out at an optical resolution of 75:1. In this way, surface temperatures can be measured accurately even at great distances from the object to be measured. At a distance of 1.2 metres from the object to be measured, the measuring spot diameter is only 16 mm. A cross laser marks the measuring spot exactly during measurement. During measurements at a short distance from the object being measured, the close focus optics has a spot diameter of only 1 mm at a distance of 70 mm. Two laser points mark the spot exactly.

• Switchable optics for far-field measurements (75:1) and close focus (1 mm, distance 70 mm)
• Especially bright cross laser sighting for indicating the actual measurement point
• Integrated humidity module for measuring indoor air humidity and for determining dewpoint distance
• Reference accuracy ± 0.75 °C with super-fast measurement technology (scanning 100 ms)
• Backlit display (3-line), shows °C, %RH, °C td, min./max. values, alarm limit values and degree of emission
• Optical and audible alarm when limit values are exceeded
• Probe socket for TC probe for determining emissivity
• Instrument memory for 90 measurement protocols
• PC software for archiving and documenting measurement data (included in delivery)
• Tripod fitting for online measurement via USB cable (included in delivery)
• Measurement data documentation on site with Testo printer

0572 1752 175 T2 2-Channel Temperature Logger with Internal NTC and External Sensor Connection for NTC probe by Testo

In addition to the monitoring and documentation of the air temperature in refrigerated and deep-freeze rooms, the temperature of the goods often also needs to be recorded. The testo 175 T2 has an external sensor input (NTC) with which, for example using permitted food probes, you can meaasure the core temperature of the goods, or beteween the packaging of packaged, deep-frozen goods. Like all Testo data loggers for applications in the food sector, the testo 175 T2 is tested according to DIN EN 12830 by the ATP testing section of the TÜV Süd.

• Large memory for 1 million measurement values - large, easily legible display
• Complies with EN 12830
• Waterproof according to IP 65
• Integrated USB and SD card interface for reading out data
• Simultaneous monitoring of air and goods temperature
• External probe input for easy connection of a permitted food probe, for example, for the measurement of the core temperature of the goods

0699 6446/12 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0563 1051 105 T-handle Thermometer by Testo

The robust food thermometer with exchangeable measurement tips for monitoring measurements in abattoirs, refrigerated storerooms, trucks etc.

• 2 user-defined limit values, visual or audible alarm
• Built-in display illumination
• Audible key feedback
• 1 line display
• Waterproof (IP 65) and robust
• Standard measurement tip 100 mm
• Frozen food tip 90 mm
• Long measurement tip 200 mm
• Easy-to-change measurement tips

0572 1765 176 H1 4-Channel Temperature/RH Logger with 2 External Connections for temp-humidity probes (NTC/capacitive) by Testo

When short-term measurements show no anomalies, but the storeroom climate still does not meet the desired requirements, then the testo 176 H1 is the right data logger. It has two connections for external humidity probes which can be positioned in the room according to the individual requirements.

• Waterproof according to IP 65
• integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - large, easily legible display
• Parallel temperature and humidity measurement
• Various connectable humidity and temperature probes e.g. for monitoring humidity in storerooms

0699 6446/13 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor