Testo

0560 4351 435-1 Multifunction Meter by Testo

The measuring instrument for ambient air conditions, for assessing Indoor Air Quality and adjusting and inspecting VAC systems. testo 435-1 is an affordable introduction to measurement engineering for ambient air conditions. The new IAQ probe measures Indoor Air Quality by measuring CO2 level, air moisture and air temperature. Temperature and humidity measurement is integrated in the new thermal probe. In addition, it is also possible to connect additional temperature probes. Readings from up to 3 temperature probes can be displayed in the clearly laid-out measuring instrument display; data transmission is radio-controlled, therefore wireless. Measurement data is printed on site on the Testo printer.

• IAQ probe for assessment of Indoor Air Quality
• Vane measurement and thermal probes
• Radio probe for temperature
• Testo fast printer for documentation
• Protection class IP54

0560 6062 606-2 Pocket PRO Moisture Meter with RH & Temperature by Testo

In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site

• Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
• Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Including wrist strap and belt holder
• Measurement of temperature and humidity in ambient air
• Air humidity measurement with the long-term stable Testo humidity sensor
• Incl. dewpoint calculation and wet bulb

0572 0561 174T Mini Temperature Data Logger Starter Kit by Testo

The mini data logger for temperature, testo 174T, is ideal for accompanying transports. Simply positioned close to the goods, e. g. in containers and refrigerated rooms, the data logger monitors temperature continuously, securely and unobtrusively. The free software ComSoft testo 174 allows fast programming of the data logger and easy analysis.

Kit Includes:

• 0572 1560 - 174T Mini Temp Data Logger, 1 channel, wall holder, batteries
• 0572 0500 - Desktop cradle for 174T & 174H data loggers, includes USB cable

• High data integrity, even with empty battery
• Large measurement data memory
• Watertight in accordance with IP65
• Compact and robust
• Conforms to EN12830
• Issue of alarms via display
• Data transfer to the PC via USB interface
• Reliable temperature measurement for the monitoring of cold chains and sensitive goods during storage and transport
• Easy readout of data and transfer to a PC via Testo USB interface

0563 0875 72 875i-2 Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 875-2i. This allows you to visualize problems in industrial maintenance and production monitoring before a malfunction or a fire risk occurs. With the testo 875-2i, you are on the trail of energy loss in building thermography, helping your customers to save expensive heating costs. You therefore save time, energy and money in industrial thermography as well as in building thermography, and ensure more security allround.

• Detector size 160 x 120 pixels: With 19,200 temperature measurement points, the measurement objects are detected in very good image quality, clearly and precisely.
• Super Resolution technology at 320 x 240 pixels: With Super Resolution technology, the image quality is improved by one class, i.e. the resolution of the thermal images is four times higher.
• Thermal sensitivity < 50 mK: Thanks to an excellent temperature resolution of < 50 mK, even small temperature differences are visible.
• Built-in digital camera with power LED's: Parallel to the thermal image, a real image of each measurement object is also stored. The power LED's guarantee optimum illumination of dark areas when recording real images.
• Automatic Hot/Cold Spot Recognition: Critical temperature stati are directly displayed using the automatic Hot-Cold-Spot recognition.
• Solar mode: For each measurement, the sun irradiation value can be entered into the camera. This value is stored for each thermal image.
• Special measurement mode for detecting areas with danger of mould: Using the externally measured ambient temperature and air humidity, as well as the surface temperature, the humidity value of each measurement point is caculated and shown in the display as areal humidity image. Humidity measurement with radio humidity probe (optional).
• High temperature up to 550°C: With the high temperature option, the measuring range can be flexibly extended up to 550°C.
• Exchangeable lenses (optional)
• Voice recording using headset
• Intuitive operation

The thermal imager testo 875-2 is delivered in a robust case incl.

• Pro software
• Soft-Case
• Carrying strap
• SD card
• USB cable
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery
• Adapter for tripod mounting

0632 3172 317-2 Gas Leak Stick by Testo

Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display.

• Shows gas concentration in visual bar display
• Sensor self-test following switch-on
• Audible confirmation of readiness to operate
• Increasing alarm sounds with increasing gas concentration
• Continuous sound if alarm threshold is exceeded
• Battery monitoring with optical display
• Self-test function

0699 6445 1 6445-1 Flowmeter - Totalizer 80m/sec by Testo

• Calibrated to air speed in m/s (calculates the volumetric flow rate Nm³/h if the diameter is entered)
• Choice of measuring range: up to 80 Nm/s or up to 150 Nm/s
• Bar probe design: versatile use for diameters from DN 50 to DN 300
• Output signals: Analog output: 4 to 20 mA (4-wire), Pulse output, RS232 digital output
• Including 5-point calibration certificate
• Robust, thermal silicon chip sensor
• Optional display: Totalizer function (sum display)/speed display/physical units (including volumetric glow rate Nm³/h) can be selected via software

400563 4161 416 Small Vane Anemometer Kit by Testo

The compact testo 416 anemometer with permanently attached vane probe with telescopic handle (max. 890mm). Volume flow is shown directly in the display. Accurate volume flow calculation due to easy input of duct area. Timed and multi-point mean calculation provide information on mean volume flow. Min/max values can also be shown in the display. The Hold function enables you to freeze the current reading in the display.

Kits includes:

• 0560 4160 - 416 Mini-Vane Anemometer
• 0516 0210 - Soft carrying case - small

• Direct display of volume flow
• Multi-point or timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto-Off function
• TopSafe, instrument protection against dirt and knocks (optional)

0572 1764 176 T4 4-Channel Temperature Logger with 4 External Thermocouple Connections (Type T, K, J) by Testo

You can measure and document flow and return temperatures with the testo 176 T4 at 4 different places, for example at the distributor og an underfloor heating system, in order to test its functionality. The requirements of a many different applications can be fulfilled using a broad range of connectable thermocouple probes (Type K, Type T, Type J).

• Large memory for 2 million measurement values - large, easily legible display
• up to 8 years battery life
• Standard battery (AA) replaceable by user
• Scope of delivery: Data logger testo 176 T4 incl. wallholder, lock, batteries, calibration certificate and instruction manual

Measuring Range: -40 to +600 °C

0563 0885 71 885-1 Thermal Imager Kit by Testo

You can carry out completely damage-free tests on materials and components with the thermal imager testo 885-1. Thanks to the 320 x 240-pixel detector, in combination with the high-quality Germanium optics, the testo 885-1 achieves an excellent image quality. This allows weak spots and problems to be reliably detected in industrial and building thermography. In combination with the Testo Super Resolution technology, the testo 885-1 records high-resolution thermal images in excellent quality (640 x 480 pixels). This means that even the smallest or very distant measurement objects can be thermographed very precisely.

• Detector size 320 x 240 pixels: With 76.800 temperature measurement points, the measurement objects are detected in outstanding image quality, extremely clearly and precisely.
• Super Resolution technology to 640 x 480 pixels Super Resolution technology improves the image quality by one class, i.e. the resolution of the thermal images is four times higher.
• Flexibility thanks to rotatable handle and fold-out, rotatable display
• Thermal sensitivity < 30 mK, Thanks to an excellent temperature resolution of < 30 mK, even the smallest temperature differences are visible.
• Large field of view thanks to 30° lens With the standard wide-angle lens, large image sections are immediately recognized, and the temperature distribution of the measurement object recorded at a glance.
• Panorama image assistant For large measurement objects, the panorama image assistant allows the analysis and documentation of a total image stitched together from many individual images. There is no need to administer, view and compare several images.
• Site Recognition Technology For repetitive thermography of similar measurement objects, the Site Recognition technology offers the direct recognition, allocation and archiving of the measurement sites, as well as the automatic allocation and archiving of the the thermal images.
• High temperature up to 1200°C With the high temperature option, the measuring range can be flexibly extended up to 1200 °C.
• Special measurement mode for detecting areas with danger of mould
• Lens protection glass
• Auto focus
• Built-in digital camera with power LEDs
• Minimum focus distance 10 cm
• Voice recording using headset

The thermal imager testo 885-1 is delivered in a robust case incl.

• Pro software
• SD card
• USB cable
• Carrying strap
• Lens cleaning cloth
• Mains unit
• Li-ion rechargeable battery