Test and Measurement

59-600-1M RG59/U, BNC Male to BNC Male, 50 feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

59-900-1M RG59/U, BNC Male to BNC Male, 75 feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

595C1 Digital Humidity Thermometer by Test Products International

Features

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39" cable length, hard-wired

Applications:

• Building maintenance
• Computer rooms
• Heating & air conditioning systems
• Bakeries
• Humidistats calibration

597C1 Digital Hygrometer/Psychrometer by Test Products International

Digital Hygrometer/Psychrometer: Dew point, wet bulb, relative humidity (RH), and temperature. The TPI 597 digital hygrometer / psychrometer is a state of the art, easy to use humidity tester designed to display ambient, dew point, and wet bulb temperature as well as humidity.

The TPI 597 digital hygrometer / psychrometer is a state of the art, easy to use humidity tester designed to display ambient, dew point, and wet bulb temperature as well as humidity. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

Features

• Small diameter (0.45") probe for measuring inside air ducts
• Relative humidity (RH) accuracy of ± 2% provides reliable readings
• Measure dew point and wet bulb temperature
• Data record function stores minimum and maximum humidity and temperature measurements
• Temperature -40° to 122°F (-40° to 50°C)
• 39" hard wired probe
• Fast response time
• Serial output through RS 232C
• Protective rubber boot
• Data hold and Auto Power Off

Applications

• Building maintenance
• Computer rooms
• Heating & air conditioning systems
• Bakeries
• Humidistats calibration

Standard Accessories

• TPI 597 Instrument
• Rubber Boot
• Battery (9V)
• Instruction Manual

605 Digital Vacuum Gauge by Test Products International

Single input vacuum gauge. 12,000 to 15 micron measurement range. 300 PSI over pressure. A safer instrument for your job.

The 605 vacuum gauge measures vacuum in Microns for accurate evacuation of refrigeration systems. Please follow manufacturers recommendations on all HVAC equipment.

Features:

• Single input with 12000 to 15 micron range.
• Seven units of measure: Microns, PSI, InHg, mBar, Pascals, Torr, mTorr.
• Display: 5 digit.
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets.

608 Digital Manometer by Test Products International

Single input manometer with ±60inH2O range. Four units of measure: inH2O, mbar, KPa, PSI and mmH20. Backlight display.

The 608 digital manometer measures pressure or vacuum in four units of measure. Please follow manufacturers recommendations on all equipment being serviced with the 608.

Features:

• Single input with +/-60 H2O range
• Four units of measure (inH2O, mbar, KPa, PSI and mmH20)
• Display - 4 digit with backlight
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Silicone Tubing (A774)

610 Single Input Manometer by Test Products International

Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Auto power off, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 series is a hand held range of pressure meters and can be summarized as follows.

• TPI 610 Single Input - 4 Function - single unit of pressure
• TPI 615 Single Input - 7 Function - 7 units of pressure
• TPI 620 Dual Input differential 4 Function single unit of pressure
• TPI 625 Dual Input differential 7 Function 7 units of pressure

All these models measure over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Single input with ±80" H2O range
• Display - 4 digit with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Auto Off: Conserve battery power

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Silicone Tubing (A774)

615 Single Input Manometer by Test Products International

Single Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 series is a hand held range of pressure meters and can be summarized as follows.

• TPI 610 Single Input - 4 Function - single unit of pressure
• TPI 615 Single Input - 7 Function - 7 units of pressure
• TPI 620 Dual Input differential 4 Function single unit of pressure
• TPI 625 Dual Input differential 7 Function 7 units of pressure

All these models measure over the range of -40.0 to +120.0 mbar. Each unit has increased resolution of 0.01 mbar and automatically auto-ranges at + 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Single input with ±80" H2O range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Display - 4 digit with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off: Conserve battery power

Standard Accessories (Included):

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Silicone Tube with 1/4" barbed 1/8" NPT fitting

62-024-1M RG62/U, BNC Male to BNC Male, 24 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

62-036-1M RG62/U, BNC Male to BNC Male, 36 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

62-048-1M RG62/U, BNC Male to BNC Male, 48 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

62-060-1M RG62/U, BNC Male to BNC Male, 60 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

621C3 Dual Input Differential Manometer Kit by Test Products International

Differential input high resolution manometer with A612 protective boot, two A603 1/8" barbed NPT fittings, two A605 1/8" barbed T fittings, two A776 static tips, and A908 carrying case with shoulder strap.

The TPI 621C3 is a hand held pressure meter with superior resolution.

All of these models measure over the range of -40.0 to +120.0 mbar. Each unit has a resolution of 0.01 mbar to +19.00 mbar and automatically auto-ranges above ± 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

The 621C3 includes all of the specs of the Model 621 and additionally consists of the following:

• 621 Manometer: + A612 Boot with tilt stand
• A605 T Fitting (x2): Ideal for use on setting pressure switches
• A776 Static Tip (x2): Measure static pressure with A776. It has a magnet to secure in place in duct work 1/4" hole required to use
• A774 Tubing: 6 foot length of silicone tubing for pressure measurements. Very flexible and will not go hard in cold temperatures.
• A791 Adapter Tube: Flexible tubing for connecting to larger fittings
• A908 Carrying Case: Soft padded case with shoulder strap holds the thermometer and probes.

623 Dual Input Differential Manometer by Test Products International

The TPI 623 Dual Input Differential Manometer is a high accuracy hand held pressure meter with superior resolution.

The TPI 623 is a hand held pressure meter with superior resolution.

Features and Benefits

• 0.001 inH2O / kPa resolution up to +/-9.999 inH2O / kPa input
• Accuracy: ±0.02 inH2O (< 2 inH2O) ±1% (> 2 inH2O)
• Dual input differential
• Autoranging
• Seven selectable units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Backlit Display

Applications

• Check for positive building pressure
• Perform room to room pressure diagnostics
• Test duct pressure and perform static pressure checks
• Adjust appliance regulators
• Test pressure switch operation on a 2-sage gas furnace in both positive and negative pressures

Standard Accessories (Included)

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Protective boot with magnets (A6XX)
• Silicone tubing with 1/4" barbed 1/8" NPT fitting (A603)

625 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ±80 inH2O range and 0.01 in H2O resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mmH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 625 is a hand held pressure meter with superior resolution.

All of these models measure over the range of -40.0 to +120.0 mbar. Each unit has a resolution of 0.01 mbar to +19.00 mbar and automatically auto-ranges above ± 19.00 mbar to 0.1 mbar resolution. Each model is supplied complete with carry pouch, battery and instruction manual.

Features:

• Dual input with ±80" H2O range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

635 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ± 5 psi range and 0.001 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 Tuffman series is a hand held range Of pressure meters and can be summarized as follows:

• TPI 635 5 PSI pressure range
• TPI 645 30 PSI pressure range
• TPI 655 100 PSI pressure range

All of these models are dual input differential pressure meters with 7 selectable scales to choose from: mbar, kPa, PSI, inHg. mmHg,inH20, and mH20.

Features

• Dual input with ±80" H2O range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

Standard Accessories (Included)

• 9V alkaline battery (A009A)
• Replacement tubing (A601)

645 Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings.

The TPI 600 Tuffman series is a hand held range Of pressure meters and can be summarized as follows:

• TPI 635 5 PSI pressure range
• TPI 645 30 PSI pressure range
• TPI 655 100 PSI pressure range

All of these models are dual input differential pressure meters with 7 selectable scales to choose from: mbar, kPa, PSI, inHg. mmHg,inH20, and mH20.

Features

• Differential input with + 29 PSI range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

Standard Accessories (Included)

• 9V alkaline battery (A009A)
• Replacement tubing (A601)

645NPT Dual Input Differential Manometer by Test Products International

Dual Differential Input Manometer with ± 29 psi range and 0.1 psi resolution. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. 1/4" NPT fittings.

The TPI 600 Tuffman series is a hand held range Of pressure meters and can be summarized as follows:

• TPI 635 5 PSI pressure range
• TPI 645 30 PSI pressure range
• TPI 655 100 PSI pressure range

All of these models are dual input differential pressure meters with 7 selectable scales to choose from: mbar, kPa, PSI, inHg. mmHg,inH20, and mH20.

Features

• Differential input with + 29 PSI range
• Dual 1/4" NPT Fittings
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
• Display - 4 digit dual line with backlight
• Smooth - Stabilizes display when measuring fluctuating pressures
• Data Hold - Freezes reading on display
• Min / Max - Records Min/Max readings
• Auto Off - Conserve battery power.

Standard Accessories (Included)

• 9V alkaline battery (A009A)
• Replacement tubing (A601)

655L Dual input, 7 Selectable Units of Measure, 100 psi, Liquids by Test Products International

Features

• Use with non-corosive water/liquid applications
• Rugged extruded aluminum housing
• Measure positive and differential pressure
• Seven units of pressure
• Backlight display
• Auto shut of after 30 min.
• Record function
• Data hold

665 Manometer with Data Logging by Test Products International

Dual Input Differential Manometer with ± 100 psi range and 0.01 psi resolution. Data logging with optional A665 software and docking station. Seven units of pressure: inH2O, mbar, KPa, PSI, mH2O, mmHg, inHg, Auto power off, Record/Min/Max, Backlight display, Zero function, Trim mode to stabilize readings. 1/4" NPT fittings.

The slim design 665 is a hand-held, differential input manometer with data logging capability. Digital filter, min/max, one touch zero, and backlight display are just a few of the features of the 665.

Features

• Differential input with + 29 PSI range
• Seven units of measure (mbar, kPa, PSI, mmHg, inHg, mH2O, inH2O)
• Data Logging: Record test data with time stamp and display with optional software
• PC Communication: IR to USB Interface and PC Application software (optional p/n A665)
• Display: 4 digit dual line with backlight
• Printing: Print test results directly to the optional A740 IR printer
• Data Hold: Freezes reading on display
• Min / Max: Records Min/Max readings
• Auto Off: Conserve battery power.

Standard Accessories (Included)

• Two 1.5 Volt Alkaline Battery (A002)
• Protective Boot with magnets (A614)

707 Carbon Monoxide Analyzer by Test Products International

Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use.

Test flue gasses at home or office spaces for the presence and location of CO leaks. With a protective rubber boot, the new 707 fits comfortably in your hand and operates with the push of a button.

The TPI 707 Carbon Monoxide Analyzer is a state of the art, easy to use analyzer designed to display carbon monoxide levels in and around appliances and work / living spaces. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up if the date of calibration is one year or older.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensor in your analyzer is warranted for two years. This warranty does not cover a sensor damaged through misuse of the analyzer.

Features

• Clear and fast response with advance pump driven technology
• Peak Hold to capture peak CO reading
• Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
• Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
• 1 ppm sensitivity
• Measures up to 10,000ppm
• Push on fittings are fast and easy to use
• Large easy to read backlit display
• Advanced electrochemical sensor is field replaceable and calibrateable
• Protective rubber boot and soft carrying case with shoulder strap is included
• Pump driven
• Pump flow block indicator
• Auto zero

Applications

• Ambient CO safety checks
• Checking flue gasses at home or office spaces for the presence and location of carbon monoxide

TPI 707 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 707 Instrument
• Rubber Boot (A765)
• Soft Carrying Case (A787)
• Flue Sampling Probe (A69)
• In-Line Filter assembly installed on Flue probw (A794)
• Mini Pump Protection Filter Assembly and spare filters (A763)
• Exhaust Spigot (removable) (A764)
• Instruction Manual

TPI 707 Flue Gas Analyzer has the following options available:

• Infrared printer (A740)
• Spare In-Line Filter (A794F is a package of 5 filters)
• Spare Water Block Filter (A794W is a package of 1 filter).

707A740 707 Carbon Monoxide Analyzer Kit by Test Products International

A707 Features

• Clear and fast response with advance pump driven technology
• Peak Hold to capture peak CO reading
• Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
• Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
• 1 ppm sensitivity
• Measures up to 10,000ppm
• Push on fittings are fast and easy to use
• Large easy to read backlit display
• Advanced electrochemical sensor is field replaceable and calibrateable
• Protective rubber boot and soft carrying case with shoulder strap is included
• Pump driven
• Pump flow block indicator
• Auto zero

A740 Features

• Power On indication (red LED)
• Adjustable contrast (low, norm, high)
• Manual paper feed (advance)
• Operates on 4 "AA" batteries or optional AC adapter
• Self test at Power On
• 3-Year Warranty

708 Combustion Efficiency Analyzer with Flue Probe by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures