Test and Measurement

3621 Industrial pH/ORP Controller, LCD Display, 1/8 Din Panel Mount by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays pH, mV or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic buffer recognition of US and NIST buffer sets. Calibrated data is stored in memory and ready to for use on power up.
• Automatic or manual temperature compensation.
• Displays absolute and relative ORP.
• Two sets of programmable on/off relays for pH or ORP (3621).
• Isolated and reversible 4-20mA current output for pH or ORP allows it to be used as a proportional output (3631).
• RoHs compliant.

HHCC-01 Carry Case with Shoulder Strap by Handheld

This briefcase-inspired solution with a solid shoulder strap is suitable for all of our rugged tablets. It has plenty of space for several computers at a time, or for those long shifts where several batteries and external equipment is needed.

The padded interior provides extra protection and the case is also water repellant – perfect for tough environments.

Features

• Shoulder strap
• Water repellant
• Plenty of space

Compatibility

• Algiz RT8
• Algiz RT10
• Algiz 8X
• Algiz 10X

93830-48 Type J Grounded Industrial Thermocouple Probe, 4" Length, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

692 1/8 DIN Panel Mount pH Transmitter with 4-20 mA Output by Jenco

1/8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block.

• All solid state design
• ATC
• Low power consumption design, reduced internal heating thus increased reliability
• 0.56 high LCD display
• Isolated 4 to 20 mA current output
• High stability and fast response
• 1/8 DIN standard aluminum case
• Easy to install
• Heat cycled 100 hours before shipment

7065400 PetroFLAG™ Analyzer for Petroleum Hydrocarbons by Modern Water

Rapid and simple field testing procedure for broad range hydrocarbon contamination in soil which is most sensitive to heavier hydrocarbons such as oils and greases.

PetroFLAG is an environmentally safe, inexpensive, field portable test to determine the total petroleum hydrocarbons in soil. It is both safe and easy to use.

PetroFLAG does not distinguish between aromatic and aliphatic hydrocarbons, but quantifies all fuels, oils, and greases as total hydrocarbons. Analysis of a 10 gram soil sample is performed using three simple steps: extraction, filtration, and analysis.

The PetroFLAG system is completely field portable. Everything needed to perform ten soil tests can be conveniently carried to the job site in a briefcase size carrying case. The PetroFLAG meter is a light-weight, rugged hand-held unit powered by a 9-volt alkaline battery. The meter is menu driven for ease of use and utilises an EEPROM memory system. Fifteen response factors are built into the analyser depending on the analyte of interest. Response factors correlate to fuels ranging from weathered gasoline to heavy crude oil. The results are shown in ppm on an LCD display screen.

PetroFLAG has been assigned a USEPA SW-846 Draft Method 9074.

• Quantitative or semiquantitative results for up to 14 fuels
• Test up to 10 samples at once
• Detection range 10 - 10,000 ppm (fuel type dependent)
• Dexsil patented chemistry
• EPA SW-846 Method# 9074

Specificity

The PetroFLAG hydrocarbon in soil test kit is used in conjunction with the PetroFLAG analyser to allow users to select the response factor that is appropriate for the suspected contaminant at each site. The following are response factors and Method Detection Limits for common hydrocarbons:

Basic Test Procedure

• Prepare soil extraction tube and developer vial by labeling with sample ID.
• Weigh 10 grams of soil into labeled tube.
• Set timer for 5 minutes.Add extraction solvent to labeled tube. Shake and incubate for 1minute.
• Pour free liquid from labeled tube into syringe barrel, add plunger and dispense into 6 ml vial.
• Add extraction solvent to developer solution. Shake for 10 seconds.
• Set timer for 10 minutes.
• Read results of developed samples in PetroFLAG Anlayser. Select pre-programmed response factor

Test kit components

• 12 blue-capped polypropylene soil tubes
• 12 polypropylene filter assemblies
• 12 screw capped developer vials
• 11 break-top vials containing soil extraction solvent
• adhesive labels
• 1 break-top vial containing calibration solution
• 12 metal spatulas

Storage & precautions

• Shelf life typically one year from date of manufacture, with specific kit expiration dateinformation provided on product packaging.
• Components can be stored and operated at room temperature.
• Extraction solvent and calibration standards contain methanol.
• PetroFLAG analyser must be used at temperatures from 4°C to 45°C.

Required test materials

PetroFLAG analyser contains: 10 soil reagents, calibration standards, digital-hand held analyzer, digital balance, timer and carry case.

Required test equipment

PetroFLAG soil 10 pack reagents

Other recommended materials

• Personal protective clothing (i.e. latex gloves)
• Liquid and solid waste containers
• Absorbant paper for blotting
• Notepad for record keeping

GHS1252 Clear Workplace Label Protectors (4" x 6"), 500/roll by GHS Safety

Use GHS clear poly shields as long term protection for you workplace labels. Shields offer surface protection from weather and off chemical resistance. Shields are sized to match GHS stock workplace label sizes.

4" x 6" 500/roll

The Frisker Digital Radiation Detector by SE International

Sick of getting tripped up by cables? Want that free hand back? Tired of lugging around a meter the size of a lunch box? Presenting The Radiation Alert® Frisker . A light weight, single-handed radiation contamination instrument that has been designed to meet the demands of today s radiation personnel for leak testing, surface monitoring, sample screening, and personnel screening. By integrating the latest electronics with a proven and dependable Geiger-Mueller detector, S.E. International has created a rugged, ergonomic tool that addresses a number of radiological applications. The Radiation Frisker detects alpha, beta, and gamma with an assortment of units of measure, customizable alarm levels, and a backlit display.

739A Gas Leak Detector by Test Products International

Designed to provide personal protection from potential hazardous conditions and help find the source of combustible gases fast!

Features

• Internal Pump
• Water/Dust Filter
• Push Button Operation
• Field Calibration
• Date/Time Display
• Calibration Alert
• Operation Memory
• Calibration Memory
• Infrared Download
• Audible/Visual Alarms
• Backlit LCD
• Programmable Auto Shut Off

Applications

• Gas Leak Survey/Investigations
• Confined Space Monitoring
• Gas Emergency Investigations
• Vessel Testing

Partial List of Users:

• Utilities
• Maintenance
• Fire Departments
• Safety Inspectors
• Home Inspectors
• Water/Sewer

Departments

• Heating Contractors
• Utility Contractors
• Industrial Plants
• Propane Marketers

08068-20 Irreversible 8-Point Vertical Temperature Label, 100-150F/37-65C; 25/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

98767-48 Traceable Infrared Thermometer with Pocket Clip and Calibration by Digi-Sense

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• One-button design makes operation easy
• °F/°C switchable
• Fixed emissivity at 0.95

Includes

pocket clip, key chain, batteries, and NIST-traceable calibration certificate with data.

701TF Temperature Magnetic Back Meter, Type T by Jenco

Model 701 is a battery operated thermocouple type digital thermometer that measures approximately 3x2.25x1.13 inches (77x60x30mm). It is available in 6 different configurations of thermocouple calibration with Celsius or Fahrenheit reading.

• All solid state design
• High stability
• Wide temperature range
• cold junction compensation
• Easy to read LCD display
• One conventional 9V battery
• Long battery life
• Interchangeable TC sensor

HHUSBC-01 USB Type-C Cable by Handheld

USB-A to USB Type-C Cable.

Compatibility

• Algiz RT8
• Algiz RT10
• Nautiz X41
• Nautiz X6

ALG7-08B Algiz 7 Extended Battery 5 200 mAh/38.5 Whr by Handheld

• Extended battery
• 2x5200 mAh (77 Wh)

RAM-101U-2461 RAM Mount with Vesa plate75mm for ALG7-05A, ALG10X-05A by Handheld

• Mount with Vesa plate 75 mm
• Used with ALG7-05A
• Includes a set of four screws

706 High CO Analyzer by Test Products International

Measure up to 99,999 ppm with the TPI 706 tests forklift exhaust gases for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button.

The 706 is an advanced state-of-the-art carbon monoxide (CO) gas analyzer designed to provide part per million readings from 0- 10,000 ppm. The 706 is capable of performing ambient as well as flue gas checks with its hot air probe and internal pump.

The 706 is utilizes an advanced long life electrochemical sensor that can be field calibrated and has a low replacement cost.

Features include IR printer port to print hard copy of data, 10 storage locations, Flow block indication, peak reading for test period as well as date and time.

Features

• Pump driven for fast response
• Store function to save up to 50 readings
• Will not shut off if 15 ppm CO is present for increased safety
• Push on fittings for fast and easy use
• Optional A740 IR printer available for hard copies of test results
• Large easy to read backlit display

Applications

• Check forklift exhaust gases for the presence and location of carbon monoxide

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• Range: 0 ~ 9,999ppm <10,000ppm: 1.000 ~ 9.999%
• 1 ppm sensitivity
• Pump driven
• Auto zero

GHS1015 Wallet Cards (50/Pkg) by GHS Safety

HazCom GHS Wallet Cards are a quick and easy reference to the new HazCom GHS pictograms and their meanings. One side of the card provides the complete set of HazCom GHS pictograms with a detailed description of each. The other side contains the list of information required to be found on an S. D. S. (Safety Data Sheet) as well as the images of the various Precautionary Statement Pictograms. Printed in full color to match the look of the HazCom GHS system requirements. Each card is 4-1/4" x 2-1/2" with rounded corners. Covered in a heavy lamination on both sides to provide long term durability in pockets or wallet. Sold in packages of 50.

ViTiny VT-300 Portable Digital Microscope by Oasis Scientific

This innovative VT-300 is the thinnest portable digital microscope on the market. With its built-in 2.8 TFT screen, this palm-size microscope is easy to use and does not need to be connected to a PC, netbook or laptop. The unique VT-300 with its full color display allows you to view images in high magnification, take standard photos, record videos, and transfer data to a PC. The software bundled with the microscope has many functions such as measurement, image editing, image comparison, aiming aid for observation, image flip, etc. VT-300 is ideal for the professional applications such as educational research, quality inspection, electronic checking, medical observation, collectables examination (coins, stamps), and anti-counterfeit.

Features:

• Ergonomic design: lightweight, small and stylish
• Intuitive, easy-to-learn interface
• The unique design with protruding lens helps to easily locate tiny objects and focus
• Unique software with Measurement Functions, Image Editing, Image Comparison, Aiming Aid for Observation, Image Flip (vertical flip, horizontal flip, vertical & horizontal flip), etc.
• Built-in 2 types of rulers: L type and Cross type for measuring the length
• S-100 Supporter with height adjustment wheel and holding clips for flat objects

Product Details:

• Dimension: 121 (L) x 56 (W) x 26 (H) mm (4.8 x 2.2 x 1.0 )
• Weight: 130g (4.4 oz) including battery
• Software Compatibility: Windows 7/Vista/XP
• Accessories Included: S-100 Supporter, Li-ion Battery, USB 1.1 Transmission Line, Power Adaptor, Instruction Manual, Installation CD, Calibrator for Measurement Application, Protection Bag, Cleaning Cloth, Wrist Strap
• Manufacturer s Warranty: 1 year

Technical Details:

• Magnification: 10x to 200x
• Magnification Optical zoom: 10x to 40x
• Magnification Digital zoom: 5x
• Built in 2.8" full color TFT LCD screen: 320 x 240 pixels for preview
• Lens & CMOS Sensor : 2M Pixels
• Photo Resolution: 1600 x 1200 pixels, JPG file
• Video Resolution: 640 x 480 pixels, AVI file
• USB Cable: 1.1 speed for transferring images to a PC
• AC Adapter: 100-240 Volt, 50/60 Hz for world-wide power requirement
• Light Source: 4 built-in White LEDs
• Special Effects: Grey Scale, Inverse, and Embossed
• Measurement Functions: Length, Circumference, Area, Radius & Diameter, Angle
• Built-in 2G Flash memory for image saving

0563 3110 310 Residential Analyzer Kit with Printer by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• IR printer
• 2 rolls of thermal paper
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement