Test and Measurement, ScichemTech

Length(MM) & Diameter: Ø18.00
Temperature: -100°C ~ +600°C OR -148°F ~ +1112°F

Probe: 213 x ø3.5
Probe Head: 40mm x 5.5mm
Temperature: -100°C ~ +300°C or -148°F ~ +572°F

SCT-108.003.02 SCT BEN-pH-2 pH Meter with ATC & RS232 by ScichemTech

SCT basic benchtop pH/ORP/temp meter with ATC and with RS232 suitable for general pH measurement in laboratory

Includes:

• Plastic pH combination electrode
• Standard solution pH 4.00, 7.00, 10.01 (50 ml)
• 9V power adapter
• Electrode holder
• Operation manual

Features:

• SCT benchtop meter is designed to measure pH,ORP, temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, automatic temperature compensation, data storage/recall, and memory max. and min. value etc.
• 1~3 point automatic calibration, and it can automatically display the percentage of slope after finishing calibration
• °C and °F can be switched freely.
• SCT benchtop meter meets ISO9001:2008 & CE standards

SCT-108.003.03 SCT BE-pH-3 Benchtop pH/ORP/Temp Meter by ScichemTech

SCT basic benchtop ph/ORP/temp meter with ATC and with RS232 suitable for general pH measurement in laboratory.

Equipped with plastic 3 in 1 pH combination electrode and stirring type electrode holder easier to use.

Automatic calibration, automatic temperature compensation Instrument with pH resolution 0.01.

Includes:

• Plastic pH combination electrode
• Temperature electrode
• pH 4.00,7.00,10.01 (50 ml) standard solution
• 9V power adapter
• Stirring type electrode holder
• pH link communication software
• RS232 communication cable
• Operation manual.

Features:

• SCT benchtop meter is designed to measure pH/ORP/temperature.
• Large LCD with blue background can display both pH and temperature value at the same time.
• It has intelligent functions for automatic calibration, automatic temperature compensation, data storage/recall, and memory max. and min. value etc.
• 1~3 point automatic calibration, and it can automatically display the percentage of slope after finishing calibration
• Equips tempearature electrode and stirring type electrode holder, which is more suitable for using.
• °C and °F can be switched freely.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.04 SCT BEN-pH-4 Benchtop GLP pH Meter by ScichemTech

SCT (GLP) good laboratory practice benchtop pH/ORP/Temp meter suitable for routine laboratory use.

Equipped with flexible electrode holder & quick operation guide easier to use.

Instrument rating 0.01.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• pH standard buffer solution 4.00, 7.00, 10.01(50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• SCT dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.05 SCT BEN-pH-5 Precision pH/ORP/Temp Meter by ScichemTech

SCT precision pH/ORP/Temp meter suitable for precise pH measurements for research and quality control.

(Resolution 0.001 pH)

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• pH standard buffer solution pH 4.00, 7.00, 10.01 (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water ph measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.06 SCT BEN-pH-6 pH/Conductivity Benchtop Meter by ScichemTech

SCT benchtop pH/Conductivity meter is the most widely used pH and conductivity double parameter measurement meters.

Resolution pH 0.01/Conductivity 0.1.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Plastic conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413 us/cm conductivity standard solution 50 ml
• 9v power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity, pH and ORP.
• The most widely used pH + conductivity double-parameter measurement meter.
• Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Option to switch conductivity, TDS, salinity and resistivity.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.07 SCT BEN-pH-7 Precision GLP pH/Conductivity Meter by ScichemTech

SCT benchtop precision GLP pH/Conductivity meter is suitable for precision measurement research and quality control, resolution pH 0.001 and conductivity 0.5.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml) 1413us/cm
• Conductivity standard solution 50ml
• 9V power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual and packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1) it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.08 SCT BEN-ISE-1 Benchtop pH/ISE Meter by ScichemTech

SCT benchtop pH/ISE meter is the high precision pH + ISE double parameter measurement meter which is suitable for precision measurement research and quality control.

10 kinds of common ions can be selected in the ion concentration measuring mode user also can self defend other ions.

Can switch 4 kinds of concentration unit px, mol/l, mg/l and ppm.

Instrument resolution pH 0.001, ISE 0.01

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode double salt bridge reference electrode
• pH standard buffer solution 50 ml
• 9V power adapter
• 6V power adapter
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 13 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.09 SCT BEN-pH-8 Benchtop pH/DO Meter by ScichemTech

Sct benchtop pH/DO meter is the high precision pH/do double parameter measurement meter which is suitable for precision measurement.

DO measurement as ATC/automatic salinity compensation and automatic air pressure compensation.

Polaro graphic type oxygen electro, the polarization time is short, fast response and accurate measurement.

Instrument resolution pH 0.001.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• DO electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50ml)
• 9V power adapter
• 6V power adapter membrane cap
• DO electrode inner solution
• Cathode polishing paper
• Stirring bead
• Battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series.
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each do electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.10 SCT BEN-ISE-2 pH/MV/ISE/Cond/DO Meter by ScichemTech

Sct benchtop pH/MV/ISE/Conductivity/DO meter is the high precision multi parameter measurement instrument.

It has high pure water pH/Conductivity measurement mode.

It has large measurement range and high accuracy conductivity measurement mode can be switch to TDS salinity and resistivity.

DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.

10 kinds of common ion can be selected in the ion concentration measuring mode. User can self define other ions.

Can switch 4 kinds of concentration unit px, mol / l, mg/l and ppm.

Instrument resolution pH 0.001, conductivity 0.5, ISE 0.01.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• pH/ATC three-in-one combination electrode
• Glass pH combination electrode
• Temperature electrode
• Conductivity electrode
• DO electrode
• Double salt bridge reference electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polishing paper stirring bead
• AA battery
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international glp standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 12 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series & NIST series
• High purified water and ammonia added purified water pH measuring mode can be set up.
• With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enters into temperature compensation of nonlinear mode.
• Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• There are 10 kinds of common ions can be selected in the ion concentration measuring mode, user also can self-define other ions.
• Can switch 4 kinds of concentration unit : px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.11 SCT BEN-CON-1 Basic Conductivity Benchtop Meter by ScichemTech

SCT basic benchtop conductivity meter for normal conductivity measurement.

Automatic calibration and automatic temperature compensation.

Instrument resolution 1.0

Includes:

• Plastic conductivity electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 600 electrode holder
• Operation manual

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• With built-in microprocessor chip, it has automatic calibration, automatic temperature compensation, data storage, and feature setting etc.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Equipped with conductivity/ATC plastic electrode. For quick and precise results.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.12 SCT-BEN-CON-2 GLP Benchtop Conductivity Meter by ScichemTech

SCT GLP conductivity benchtop meter suitable for normal conductivity measurement.

Advanced and original conductivity measurement technology wide measurement range, high accuracy, conductivity measurement mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• 1413 us/cm conductivity standard solution
• 9V power adapter
• Rs-232 communication cable
• Communication software cd
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity and temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Equips conductivity/ATC electrode. Its measurement result is fast and precise.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity,TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.13 SCT-BEN-CON-3 Precision Benchtop Conductivity Meter by ScichemTech

Sct precision benchtop conductivity meter for precision conductivity Measurement of research and quality control.

With wide measurement range, high accuracy conductivity measurement Mode can be switch to TDS, salinity and resistivity.

Instrument resolution 1.0

Includes:

• Flexible electrode holder
• Plastic three-in-one combination electrode
• 1413 us/cm conductivity standard solution (50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT bench precision conductivity meter, suitable for high precision conductivity measurement of science research and quality control, with accuracy 0.5%.
• Equips conductivity/ATC glass electrode. Its measurement result is fast and precise. Can choose 25°c, 20°c and 18°c three kinds of basis temperature.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series
• Equipped conductivity/ATC electrode for quick and precise results.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.14 SCT BEN-CON-4 Precision Conductivity/DO Benchtop Meter by ScichemTech

SCT precision conductivity DO meter for high precision measurement of the conductivity and dissolved oxygen in laboratory.

Suitable for bio-technology, aqua culture, power plant and environmental protection industries.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Conductivity electrode
• DO electrode
• 1413us/cm conductivity standard solution
• 9V power adapter
• 6V power adapter
• Membrane cap
• DO electrode inner solution
• Cathode polish paper
• B628 stirring bead
• Battery
• RS232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize 7 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series.
• Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.15 SCT BEN-DO-1 Benchtop DO/Temperature Meter by ScichemTech

SCT benchtop DO temperature meter with automatic salinity compensation and automatic air pressure compensation.

Equipped with intelligent stirrer, flexible electrode holder and operation instruction.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• DO electrode
• DO electrode inner solution
• Membrane cap (for DO electrode use)
• Cathode polishing paper
• 9V power adapter (for meter use)
• 6V power adapter (for stirrer use)
• RS-232 communication cable
• Communication software CD
• Stirring bead
• AA battery
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure dissolved oxygen and temperature.
• SCT DO measurement has ATC, automatic salinity compensation and automatic air pressure compensation.
• The new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make do measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode adopts combination diaphragm cap, assembling sensitive membrane with diaphragm cap, which very convenient to replace the sensitive membrane. The user only needs to screw the new membrane cap on the electrode.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.16 SCT BEN-SOD-1 Benchtop Sodium Ion Meter by ScichemTech

SCT benchtop sodium ion meter is suitable for measuring low sodium ion concentration in the water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Sodium ion electrode
• Reference electrode
• Temperature electrode
• pNA 1.00 standard solution
• 10^-1 mol/l CSCL reference solution
• 9V power adapter
• 16V power adapter
• AA battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose Etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Sodium electrode range.
• Sodium ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

SCT-108.003.17 SCT-BEN-CAL-01 Benchtop Calcium Ion Concentration Meter by ScichemTech

SCT benchtop calcium ion meter widely used in detecting the concentration of calcium ions in water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Calcium ion combination electrode
• Calcium electrode inner solution
• Calcium electrode measuring head
• Tool for filling calcium electrode inner solution
• Temperature electrode
• PCA 1.00 standard solution
• 9v power adapter
• 6v power adapter
• Battery
• RS-232 communication cable
• MP518 communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features upto automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Calcium electrode range.
• Calcium ion combination electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.18 SCT-BEN-FLU-1 Benchtop Fluoride Ion Concentration Meter by ScichemTech

SCT benchtop fluoride ion meter suitable for detecting fluoride ion in the water samples.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Fluoride ion electrode
• Reference electrode
• Temperature electrode
• PF1.00 standard solution
• 9V power adapter
• 6V power adapter
• Battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Electrode range.
• Fluoride ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.19 SCT-BEN-HARD-1 Benchtop Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode stirring type electrode holder
• Water hardness calibration solution (B1,B2 & B23) 20 ml
• Test cup pedestal in a solution for water hardness electrode tools for filling reference solution
• WH - link communication software
• RS-232 communication cable
• Operation manual

Features:

• SCT benchtop meter is for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
• Ability to switch among eight units: mmol/l, mg/l (caco3), mg/l (cao), mmol/l (boiler) and mg/l (ca). Three options of three units: °FH France °DH Germany and °EH UK from WH-link communication software
• Equipped with B1 B2 and B3 calibration solutions.
• Equipped with WH-link communication software, connect testing data of meter to computer.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.003.A1 pH Combination Electrode by ScichemTech

• Plastic combination pH electrode
• suitable for routine pH measurements
• widely used
• BNC connector