Oakton Instruments

WD-35811-72 Double-junction, Epoxy-body, Sealed Acorn All-in-One pH Electrode (Use with pH 5, pH 6, pH 510, Ion 510, pH 1100, pH 2100 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

Each All-in-One Acorn electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a phono jack connector for temperature

WD-35643-11 DO 6+ Dissolved Oxygen Meter Only, with NIST Traceable Certificate of Calibration, 0.0 to 50.0°C Tempature Range and 0.0 to 50.0 ppt, 0 to 20 mg/L Dissolved Oxygen Range by Oakton

High accuracy combined with economical pricing

These meters provide a great value. The ranges work to test water quality in wastewater, surface water, ground water, or drinking water. A clear LCD display shows results in ppm or mg/L with enunciators to aid in use and troubleshooting. Six simple buttons allow for freezing readings, toggling between display units and temperature results, setup, calibration, and automatic barometric and salinity compensation after manual parameter inputs. Additional benefits of the simple design allow you to view electrode slope, zero offset, and millivolt values for electrode diagnostics.

• Includes Electrolyte solution, membrane caps,protective rubber boot, and batteries
• Low-maintenance, Galvanic probe requires no warm-up time

WD-35418-20 pH 620 Portable Waterproof pH Meter with All-in-One pH/Temperature Probe by Oakton

Expanded range, resolution and accuracy, increased memory, and advanced communications

These waterproof handheld meters feature a 2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.

Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards.

The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards.

The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!

WD-35614-30 pH 150 Portable Waterproof pH Meter and Electrode by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

WD-35812-12 Chloride CI- Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-35408-10 CON 610 Portable Waterproof Conductivity Meter with Probe by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Includes conductivity probe and batteries
• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

WD-35418-10 pH 610 Portable Waterproof pH Meter with All-in-One pH/Temperature Probe by Oakton

Expanded range, resolution and accuracy, increased memory, and advanced communications

These waterproof handheld meters feature a 2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.

Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards.

The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards.

The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• No more excuses for missing data! Out-of-date or unperformed calibrations are now things of the past!

WD-35806-21 Flat Surface, Self Cleaning, Double-junction pH Electrode with ATC (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

WD-39642-00 Mini TempTestr Infrared Thermometer by Digi-Sense

Economical infrared thermometer fits right in your pocket!

This pocket-size infrared thermometer takes surface temperature readings of any liquid, solid, or semi-solid in less than one second. Operation is simple turn it on, point at sample, and take reading. Noncontact temperature measurements are ideal for food preparation, field use, and for mechanical maintenance and troubleshooting.

Features include switchable °F/°C display, Hold function, selectable auto-off, minimum/maximum memory readings, adjustable emmissivity, wrist strap, flip-open stand, metal carrying case and soft touch keypad.

• Includes metal storage case, wrist strap, spare battery and instruction manual
• Simply point and press for quick accurate readings
• Features minimum/maximum memory readings and Hold function

WD-35408-12 CON 610 Portable Waterproof Conductivity Meter by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Includes batteries
• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

WD-35420-01 RS-232 Interface Cable for Advanced pH/Ion Meters by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

Works with 2700 and 450 meters.

WD-35653-01 "Singles" pH 4.01 Buffer Solution Pouches, 20 pouches per box each with 20 mL of solution by Oakton

Choose from economical solution bottles or individually sealed pH buffer pouches.

All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to ensure quality. ±0.01 pH at 25°C.

OAKTON pH buffer solution bottles are labeled with the name and CAS number for all ingredients (for Right-to-Know requirements), and are supplied with an MSDS (Material Safety Data Sheet).

OAKTON pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration. Each box contains twenty 20 mL pouches. Dimensions: 4.5"L x 5"W x 4.5"H (box). Shpg wt 1 lb per box.

• NIST traceable materials
• Labeled with pH vs temperature tables for accurate calibration

WD-35604-01 CON 6+ Handheld Conductivity Meter with Probe, -10 to 110°C Temperature Range and 0 to 20.00, 0 to 200.0, 0 to 2000 µS Conductivity Range, with NIST Traceable Certificate of Calibration by Oakton

Features five measuring ranges up to 200.0 mS

These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use.

Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.

Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.

CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.

• High accuracy in changing temperature conditions
• Temperature readout and automatic temperature compensation (ATC)
• Calibrate the CON 6 at one point and all five ranges are covered

WD-35614-33 pH 150 Portable Waterproof pH Meter by Oakton

The pH 150 meter offers a rugged, waterproof housing with built-in stand at an economical price. The large, three-line LCD lets you simply view the pH or mV measurement simultaneously with temperature and calibration % slope. Auto buffer recognition identifies the correct pH buffer for rapid, reliable calibration.

Calibrate meter with up to six points from USA, NIST, and DIN pH buffer sets. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature readout from C/F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery life indicator, and electrode status. Data storage allows manual storage and recall of 150 data sets, as well as the log of the last calibration data.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip holder quickly and easily secures the electrode to your beaker
• Expanded data logging for up to 150 data sets
• mV offset for calibration of ORP standards, zeroing mV, and pH diagnostics
• 700 hour battery-life, or optional AC power adapter
• Built-in stand and wall mount option allow for easy benchtop measurement

WD-35613-54 ppH 5+ Meter Kit with "All-in-one" pH Electrode, pH Buffer Solutions, Sample Bottles, Rubber Boot, Batteries, and Carrying Case by Oakton

High ±0.01 pH accuracy at economical prices

The microprocessor-based pH 5+ meter is OAKTON s most economical portable pH meter, yet it gives you the same high accuracy and reliability of our other portable meters! Use this meter to take routine pH and temperature measurements. Meter includes a protective rubber boot that also acts as a meter stand.

• Includes pH 5+ Portable pH Meter with an "All-in-one" pH electrode, pH buffer solutions, sample bottles, rubber boot, batteries, and carrying case
• Reads pH and temperature
• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH electrodes with BNC connectors

WD-35811-71 Single-junction, Epoxy-body, Gel-filled pH Electrode (Use with pH 5, pH 6, pH 510, Ion 510, pH 1100, pH 2100 meters) by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

Each All-in-One Acorn electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a phono jack connector for temperature

WD-35618-32 pH 450 Portable Waterproof pH Meter by Oakton

The pH 450 meter offers an IP67-rated waterproof housing, making it ideal for the manufacturing floor, field testing, and the laboratory. The large, backlit LCD lets you view the main measurement simultaneously with temperature and calibration data with % slope. Calibrate pH and ISE with up to six points from USA, NIST, DIN, PWB and custom pH buffers. Automatic temperature compensation (ATC) ensures measurement accuracy even in fluctuating temperatures. Select temperature reading from degree C or degree F to suit your application.

Meter features include ready (stability) indicator, smart averaging, hold function, calibration alarm (visible), battery-life indicator, and electrode status.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cables for USB or RS-232 connectivity.

• Intuitive, user-friendly icons--electrode status displays pH slope
• Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container
• USB or RS-232 output for up to 500 data sets
• Extended battery life or optional universal power adapter
• 700 hour battery-life, or optional AC power adapter
• Built-in stand with wall mount option allows for easy benchtop measurement or storage

WD-35419-03 pH 700 Benchtop Meter with "All-in-one" pH Electrode, 110/220 VAC, 50/60 Hz by Oakton

The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• Compact footprint is over 40% smaller than other benchtop meters
• Large display permits easier readout viewing
• Datalogging allows you to store and recall up to 100 data sets

WD-35613-44 pH 6+ Meter Kit - Reads pH, mV (for ORP/Redox measurements) and Temperature, with NIST Traceable Certificate of Calibration by Oakton

Reads pH, mV (for ORP/Redox measurements) and temperature

Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as a meter stand.

• Automatic Temperature Compensation (ATC)
• All push button operation
• Three-point pH calibration and mV offset calibration
• Auto buffer recognition
• Hold function; Auto-off
• Use with most pH and ORP electrodes with BNC connectors

WD-35434-71 PCD 650 Portable Waterproof pH / Conductivity / Dissolved Oxygen Meter with Kit, with NIST Traceable Certificate of Calibration by Oakton

Simultaneously measure and display pH, Conductivity and Dissolved Oxygen

These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up to 500 points either automatically, manually, or at timed intervals. User-selectable calibration due alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily download data no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached!

• Expanded range, resolution, and accuracy, plus increased memory and advanced communications!
• Ideal for use in dirty and wet environments

WD-35805-24 Submersible pH Electrode, Double-junction, Gel-Filled, ABS Plastic-body with 10 ft Cable (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings