MSA

10076727 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076726 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076725 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076728 Altair Pro Single Gas-Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10125912 Altair 4X Mining Multigas Detector Kit by MSA

MSA s new ALTAIR 4X Mining Multigas Detector is driven by XCell Sensor Technology with ASIC design.Technology offers durability and performance for mining applications. Methane-optimized catalytic bead sensor provides increased stability over time. Dependable multigas detector tests for LEL, oxygen, carbon monoxide, and hydrogen sulfide.

Features:

• Methane-optimized catalytic bead sensor provides increased stability over time
• Sensor response and clear times in less than15 seconds
• Reduces gas usage for bump testing and calibration
• Greater accuracy and repeatability within changing environmental conditions
• Temperature, humidity and pressure
• Digital sensors offer increased RF (radio frequency) immunity
• Eliminate false alarms from radios
• Accurate CO readings from 0-2000 ppm
• Industry-first CO/NO₂ combination sensor with wide range and fast response times
• Increased methane sensor poison resistance decreases down time and frequency of sensor replacements
• End-of-sensor life warning gives advanced notice of failing sensors
• Sensor life that greatly exceeds industry average

Lasting Durability

• IP67 ingress protection rating
• Dust-tight
• Water-tight while completely submerged in 3 feet of water for 60 minutes
• Withstands extreme impacts with rugged polycarbonate housing
• Passes 20-ft drop test onto concrete
• Rubberized instrument over-molding acts as an additional armor shield
• Available in standard charcoal color or high-visibility glow-in-the-dark
• Patented catalytic bead support wire protects methane sensor from shock

Life-Saving Performance

• 24-hour compliance tick mark display indication
• Clear visual indication of testing and operational compliance
• Available for up to 4 gases within one small package (CH₄, CO, O₂, H₂S, or NO₂)
• Large back-lit LCD display makes measurement readings easy to see
• Loud 95dB audible horn
• Four bright LED lights on all instrument corners make alarms visible from all directions
• Selectable MotionAlertTM feature uses internal accelerometer to indicate "man down" and sound alarm
• Compatible with MSA Galaxy Automated Test System for bump testing, calibrating, downloading, and report generation.
• 30+ hour battery run time

10076720 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076719 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10125913 Altair 4X Mining Multigas Detector Kit by MSA

MSA s new ALTAIR 4X Mining Multigas Detector is driven by XCell Sensor Technology with ASIC design.Technology offers durability and performance for mining applications. Methane-optimized catalytic bead sensor provides increased stability over time. Dependable multigas detector tests for LEL, oxygen, carbon monoxide, and hydrogen sulfide.

Features:

• Methane-optimized catalytic bead sensor provides increased stability over time
• Sensor response and clear times in less than15 seconds
• Reduces gas usage for bump testing and calibration
• Greater accuracy and repeatability within changing environmental conditions
• Temperature, humidity and pressure
• Digital sensors offer increased RF (radio frequency) immunity
• Eliminate false alarms from radios
• Accurate CO readings from 0-2000 ppm
• Industry-first CO/NO₂ combination sensor with wide range and fast response times
• Increased methane sensor poison resistance decreases down time and frequency of sensor replacements
• End-of-sensor life warning gives advanced notice of failing sensors
• Sensor life that greatly exceeds industry average

Lasting Durability

• IP67 ingress protection rating
• Dust-tight
• Water-tight while completely submerged in 3 feet of water for 60 minutes
• Withstands extreme impacts with rugged polycarbonate housing
• Passes 20-ft drop test onto concrete
• Rubberized instrument over-molding acts as an additional armor shield
• Available in standard charcoal color or high-visibility glow-in-the-dark
• Patented catalytic bead support wire protects methane sensor from shock

Life-Saving Performance

• 24-hour compliance tick mark display indication
• Clear visual indication of testing and operational compliance
• Available for up to 4 gases within one small package (CH₄, CO, O₂, H₂S, or NO₂)
• Large back-lit LCD display makes measurement readings easy to see
• Loud 95dB audible horn
• Four bright LED lights on all instrument corners make alarms visible from all directions
• Selectable MotionAlertTM feature uses internal accelerometer to indicate "man down" and sound alarm
• Compatible with MSA Galaxy Automated Test System for bump testing, calibrating, downloading, and report generation.
• 30+ hour battery run time

10125914 Altair 4X Mining Multigas Detector Kit by MSA

MSA s new ALTAIR 4X Mining Multigas Detector is driven by XCell Sensor Technology with ASIC design.Technology offers durability and performance for mining applications. Methane-optimized catalytic bead sensor provides increased stability over time. Dependable multigas detector tests for LEL, oxygen, carbon monoxide, and hydrogen sulfide.

Features:

• Methane-optimized catalytic bead sensor provides increased stability over time
• Sensor response and clear times in less than15 seconds
• Reduces gas usage for bump testing and calibration
• Greater accuracy and repeatability within changing environmental conditions
• Temperature, humidity and pressure
• Digital sensors offer increased RF (radio frequency) immunity
• Eliminate false alarms from radios
• Accurate CO readings from 0-2000 ppm
• Industry-first CO/NO₂ combination sensor with wide range and fast response times
• Increased methane sensor poison resistance decreases down time and frequency of sensor replacements
• End-of-sensor life warning gives advanced notice of failing sensors
• Sensor life that greatly exceeds industry average

Lasting Durability

• IP67 ingress protection rating
• Dust-tight
• Water-tight while completely submerged in 3 feet of water for 60 minutes
• Withstands extreme impacts with rugged polycarbonate housing
• Passes 20-ft drop test onto concrete
• Rubberized instrument over-molding acts as an additional armor shield
• Available in standard charcoal color or high-visibility glow-in-the-dark
• Patented catalytic bead support wire protects methane sensor from shock

Life-Saving Performance

• 24-hour compliance tick mark display indication
• Clear visual indication of testing and operational compliance
• Available for up to 4 gases within one small package (CH₄, CO, O₂, H₂S, or NO₂)
• Large back-lit LCD display makes measurement readings easy to see
• Loud 95dB audible horn
• Four bright LED lights on all instrument corners make alarms visible from all directions
• Selectable MotionAlertTM feature uses internal accelerometer to indicate "man down" and sound alarm
• Compatible with MSA Galaxy Automated Test System for bump testing, calibrating, downloading, and report generation.
• 30+ hour battery run time

10076723 Altair Pro Single-Gas Detector - Carbon Monoxide (CO) Fire by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10125915 Altair 4X Mining Multigas Detector Kit by MSA

MSA s new ALTAIR 4X Mining Multigas Detector is driven by XCell Sensor Technology with ASIC design.Technology offers durability and performance for mining applications. Methane-optimized catalytic bead sensor provides increased stability over time. Dependable multigas detector tests for LEL, oxygen, carbon monoxide, and hydrogen sulfide.

Features:

• Methane-optimized catalytic bead sensor provides increased stability over time
• Sensor response and clear times in less than15 seconds
• Reduces gas usage for bump testing and calibration
• Greater accuracy and repeatability within changing environmental conditions
• Temperature, humidity and pressure
• Digital sensors offer increased RF (radio frequency) immunity
• Eliminate false alarms from radios
• Accurate CO readings from 0-2000 ppm
• Industry-first CO/NO₂ combination sensor with wide range and fast response times
• Increased methane sensor poison resistance decreases down time and frequency of sensor replacements
• End-of-sensor life warning gives advanced notice of failing sensors
• Sensor life that greatly exceeds industry average

Lasting Durability

• IP67 ingress protection rating
• Dust-tight
• Water-tight while completely submerged in 3 feet of water for 60 minutes
• Withstands extreme impacts with rugged polycarbonate housing
• Passes 20-ft drop test onto concrete
• Rubberized instrument over-molding acts as an additional armor shield
• Available in standard charcoal color or high-visibility glow-in-the-dark
• Patented catalytic bead support wire protects methane sensor from shock

Life-Saving Performance

• 24-hour compliance tick mark display indication
• Clear visual indication of testing and operational compliance
• Available for up to 4 gases within one small package (CH₄, CO, O₂, H₂S, or NO₂)
• Large back-lit LCD display makes measurement readings easy to see
• Loud 95dB audible horn
• Four bright LED lights on all instrument corners make alarms visible from all directions
• Selectable MotionAlertTM feature uses internal accelerometer to indicate "man down" and sound alarm
• Compatible with MSA Galaxy Automated Test System for bump testing, calibrating, downloading, and report generation.
• 30+ hour battery run time

10076722 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10076721 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

Altair 4X Mining Multigas Detector by MSA

MSA s new ALTAIR 4X Mining Multigas Detector is driven by XCell Sensor Technology with ASIC design.Technology offers durability and performance for mining applications. Methane-optimized catalytic bead sensor provides increased stability over time. Dependable multigas detector tests for LEL, oxygen, carbon monoxide, and hydrogen sulfide.

Features:

• Methane-optimized catalytic bead sensor provides increased stability over time
• Sensor response and clear times in less than15 seconds
• Reduces gas usage for bump testing and calibration
• Greater accuracy and repeatability within changing environmental conditions
• Temperature, humidity and pressure
• Digital sensors offer increased RF (radio frequency) immunity
• Eliminate false alarms from radios
• Accurate CO readings from 0-2000 ppm
• Industry-first CO/NO₂ combination sensor with wide range and fast response times
• Increased methane sensor poison resistance decreases down time and frequency of sensor replacements
• End-of-sensor life warning gives advanced notice of failing sensors
• Sensor life that greatly exceeds industry average

Lasting Durability

• IP67 ingress protection rating
• Dust-tight
• Water-tight while completely submerged in 3 feet of water for 60 minutes
• Withstands extreme impacts with rugged polycarbonate housing
• Passes 20-ft drop test onto concrete
• Rubberized instrument over-molding acts as an additional armor shield
• Available in standard charcoal color or high-visibility glow-in-the-dark
• Patented catalytic bead support wire protects methane sensor from shock

Life-Saving Performance

• 24-hour compliance tick mark display indication
• Clear visual indication of testing and operational compliance
• Available for up to 4 gases within one small package (CH₄, CO, O₂, H₂S, or NO₂)
• Large back-lit LCD display makes measurement readings easy to see
• Loud 95dB audible horn
• Four bright LED lights on all instrument corners make alarms visible from all directions
• Selectable MotionAlertTM feature uses internal accelerometer to indicate "man down" and sound alarm
• Compatible with MSA Galaxy Automated Test System for bump testing, calibrating, downloading, and report generation.
• 30+ hour battery run time

10128630 Galaxy GX2 Automated Test System, Altair 4/Altair 4X, Charger, 1 Valve, North American Version by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.

10076718 Altair Pro Single Gas-Detector Alternate Set Point Models - Carbon Monoxide (CO) by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

10071340 Altair Single-Gas Detector Alternate Set Point Models - Hydrogen Sulfide (H2S) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

10128629 Galaxy GX2 Automated Test System, Altair 4/Altair 4X, Charger, 4 Valve, North American Version by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.