Jenco

3321 Conductivity/Resistivity Controller with 2-Relays by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays conductivity, resistivity or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic or manual temperature compensation.
• Two sets of programmable on/off relays for conductivity or resistivity (3321).
• Isolated and reversible 4-20mA current output for conductivity or resistivity allows it to be used as a proportional output (3331).
• RoHS compliant.

765JF Thermocouple Panel Thermometer, Type J, Range -346°F to 1400°F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

6350MKA pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350M: Conductivity meter with memory
• 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 6350F: Carrying Case

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

791KF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type K by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

791LPTBF Panel Mount Digital Temperature Transmitter with 4- 20 mA Current Output, Type PTB, Red LED by Jenco

Panel mount digital temperature transmitter with 4- 20 mA current output that allows the 791 to drive any loop powered process indicator or recorder. Current output has expanded or normal switch for user adjustable center point and span control for temperature to 4-20 mA output and features a LCD display & 1/8 DIN Aluminum case. Types. J, K, T, 3-wire Pt-100 RTD, specify °C or °F. Ambient range 0 to 40°C. 115 / 230V AC operation.

• All solid state design
• Low power consumption ,reduced internal heating ,increased reliability
• High 50/60 hz noise rejection
• Heat cycled 100 hours before shipment
• Available for various thermocouple and rtd calibrations
• Easy to install
• Aluminum 1/8 DIN housing
• Isolated 4 to 20 mA output over span in nor mode
• 115VAC /230VAC operations

9251N D.O. & Temperature Handheld Polarographic Meter by Jenco

• Clear LCD displays dissolved oxygen as percent air saturation or as parts per thousand simultaneously with temperature.
• Convenient one point calibration for dissolved oxygen. Calibration data is stored in memory and is ready for use on power up.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Work with accurate and reliable polarographic dissolved oxygen probes.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of dissolved oxygen with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

3175 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

62K ORP Handheld Meter with Offset Adjustment Kit by Jenco

ORP handheld meter with BNC and Zero Adjustment via manual potentiometers for calibration of meter and ORP electrode to calibration standard solutions. Housed in a rugged splash proof case with large LCD display. AC/DC Powered.

Includes:

• 62 ORP Handheld Meter with Offset Adjustment
• 600E-ORP Probe
• 600D115 AC Adapter
• 6007F Carrying case

• Zero adjust for ORP
• LCD display
• Long 1400 hrs battery life
• High stability
• Rugged case