pH Meters, Jenco

3671N 1/8 DIN Panel Mount pH/ORP Controller by Jenco

1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power115/230A AC.

• All solid state design
• Low cost
• Easy to install
• Set points on front panel
• Recorder output
• 0.56 high efficiency red led display
• 1/8 DIN aluminum case
• Set points cover entire span
• ATC for pH 0 to 100 °C
• Internal pH/ORP select switch
• Low power consumption design, reduced internal heating thus increased reliability

5001 pH Handheld Meter by Jenco

pH handheld meter with build in tabletop stand and LCD digital display. Manual temperature compensation and pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Input connector is BNC type. AC/DC Powered.

• All solid state design
• Low drift and high stability
• Tilt stand
• Rugged carrying case
• Low cost
• Manual temperature compensation for pH measurement
• Battery low indicator
• UL approved ac line adaptor
• 9v battery

5005 pH/mV/Temp. Handheld Meter by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

5005KA pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600P pH electrode
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

5005KC pH Meter Kit by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

Includes:

• 5005 pH/mV/Temp. handheld meter
• 600A Temp. probe
• 600P pH electrode
• 600D115 AC adapter
• 5005F carrying case with pH 4 & 7 capsules

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

60 pH Handheld Meter by Jenco

pH handheld meter with BNC, LCD display and manual temperature compensation with two point calibration via potentiometers for ease of use. Case is rugged and splash resistant. AC/DC Powered.

• All solid state design
• High accuracy
• LCD display
• Extra long battery life
• Battery low indicator
• Low cost
• Rugged carrying case
• Power: one 9V DC battery or 115/230v ac adapter

6010MK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 600P pH electrode

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010MKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010MKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010N Handheld pH/ORP Meter by Jenco

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

601A pH/mV Handheld Meter by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

601AKA pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

601AKB pH Meter Kit by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

Includes:

• 601A pH/mV Handheld Meter
• 600P pH electrode
• 601AF carrying case
• 600D115 AC adapter

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

603A Benchtop Analog pH Meter, Karl Fisher, AC Adapter by Jenco

The model 603A is a high performance, low cost, general purpose laboratory instrument for the measure of pH and mV.

The model 603A uses a 5 2/1 inch analog meter with a mirror scale to increase readability to 0.02 pH and 2 mV.

Recorder output is provided for Karl Fischer and other polarized electrode titration applications.

603AKA Benchtop Analog pH Meter Kit by Jenco

The model 603A is a high performance,low cost,general purpose laboratory instrument for the measure of pH and mV.

The model 603A uses a 5 2/1 inch analog meter with a mirror scale to increase readability to 0.02 pH and 2 mV.

Recorder output is provided for Karl Fischer and other polarized electrode titration applications.

Includes:

• 603A Benchtop Analog pH Meter, Karl Fisher, AC Adapter
• 600P pH Electrode
• 600D115 AC Adapter

603AKB Benchtop Analog pH Meter Kit by Jenco

The model 603A is a high performance,low cost,general purpose laboratory instrument for the measure of pH and mV.

The model 603A uses a 5 2/1 inch analog meter with a mirror scale to increase readability to 0.02 pH and 2 mV.

Recorder output is provided for Karl Fischer and other polarized electrode titration applications.

Includes:

• 603A Benchtop Analog pH Meter, Karl Fisher, AC Adapter
• 600P Probe
• 600A Temp. Probe
• 600D115 AC Adapter

608 Handheld Meter with Red LED Display by Jenco

• Three position rocker switch for on/off/momentary operation
• All solid design
• Low input response
• Manual temp. compensation for pH measurement
• 6conventional aa batteries
• Low drift and high stability
• Bright red led display
• UL approved ac line adaptor
• Low cost
• Rugged carrying case
• Analog recorder output