pH Meters, Jenco

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

pH630FA pH/Temperature & Replaceable pH Electrode by Jenco

Large LCD display pH/temperature pocket tester, easy to use calibration procedure for the novice.

VisionPlus pH630FA is a rugged, easy to use, IP67 rated pH tester with temperature readout. Key features include IP67 rated body, automatic temperature compensation, up to 3 point calibration and replaceable electrode module. This pH tester is RoHS compliant.

• Automatic temperature compensation
• 1, 2 or 3 point calibration
• Stores calibration data
• Replaceable electrode module
• High noise resistance
• Simultaneous display of pH and temperature
• Large temperature range
• Dedicated button for data hold
• Low battery indicator
• IP67 rated body for water-proof and dust-proof
• RoHS compliant

3661 pH/ORP Controller/Transmitter Voltage Output, LED Display by Jenco

pH, ORP, Temperature In-line Controller. 1/8 DIN, RoHS compliant, panel mount pH/ORP/Temp controller with 2 sets of programmable on/off relay and backlight. Extremely price competitive.

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays pH, mV or temperature with backlight.
• Universal power supply input from 100 to 240 V AC.
• Automatic buffer recognition of US and NIST buffer sets. Calibrated data is stored in memory and ready to for use on power up.
• Automatic or manual temperature compensation.
• Displays absolute and relative ORP.
• Two sets of programmable on/off relays for pH or ORP & Isolated and reversible
• 4 to 20 mA current output for pH or ORP allows it to be used as a proportional output.
• CE, RoHs compliant.

692 1/8 DIN Panel Mount pH Transmitter with 4-20 mA Output by Jenco

1/8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block.

• All solid state design
• ATC
• Low power consumption design, reduced internal heating thus increased reliability
• 0.56 high LCD display
• Isolated 4 to 20 mA current output
• High stability and fast response
• 1/8 DIN standard aluminum case
• Easy to install
• Heat cycled 100 hours before shipment

6177KA Benchtop pH Meter Kit by Jenco

Kit Includes:

• 6177 - Benchtop pH/Mv (ORP)/Temp Meter
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230AST - Stainless Steel, 10k Ω Thermistor, 8-Pin Din Connector
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series pH/ORP/temperature benchtop pH meter is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop pH Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• up to 5 Point calibration (pH); 1 Point calibration (mV)
• Non-volatile memory holds up to 750 data points
• Simple calibration with automatic buffer recognition of US and European buffers
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mv/temp pH meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP probes
• 8-Pin DIN for temperature probe (6177M)
• 2.5 mm phone jack for temperature probe (6177EU)
• Optional, detached electrode arm

6177 Benchtop pH/Mv (ORP)/Temp Meter by Jenco

The Basis Series pH/ORP/temperature benchtop pH meter is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop pH Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• up to 5 Point calibration (pH); 1 Point calibration (mV)
• Non-volatile memory holds up to 750 data points
• Simple calibration with automatic buffer recognition of US and European buffers
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mv/temp pH meter uses a standard BNC connector so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP probes
• 8-Pin DIN for temperature probe (6177M)
• 2.5 mm phone jack for temperature probe (6177EU)
• Optional, detached electrode arm

3631 Industrial pH/ORP Controller, LCD Display, 1/8 Din Panel Mount by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays pH, mV or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic buffer recognition of US and NIST buffer sets. Calibrated data is stored in memory and ready to for use on power up.
• Automatic or manual temperature compensation.
• Displays absolute and relative ORP.
• Two sets of programmable on/off relays for pH or ORP (3621).
• Isolated and reversible 4-20mA current output for pH or ORP allows it to be used as a proportional output (3631).
• RoHs compliant.

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

• Clear LCD displays pH or mV, with temperature and relay status simultaneously.
• Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
• Displays absolute and relative ORP.
• Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
• 2 programmable on/off relays: 2 for pH or ORP.
• CE Approved
• Password protection.
• IP65

pH6175 Benchtop pH, mV, ORP, Ion Temperature Meter by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant

6010MKA Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

pH6175KAA Benchtop pH, mV, ORP, Ion Temperature Meter Kit by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

Includes:

• pH6175: Meter
• 600P: pH/Ref Electrode, 3-ft, BNC
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter
• 007N: Electrode's holder, swing arm

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant

6231N pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6173KBA Benchtop pH/mV/Temperature Meter Kit by Jenco

pH/mV/Temp benchtop meter with an extra large LCD display for ease of use. Features a splash proof and rugged case ideal for schools and universities. Features EEF, Electrode Efficiency Function, multiple buffers 4.00, 4.01, 6.86, 7.00, 9.18 & 10.0 and automatic slope, buffer and electrode offset recognition. Has power down memory backup and works on 6 AA batteries or 115/230 V AC adapters. CE Approved & ISO 9001 Certified.

Includes:

• 6173 Benchtop pH/mV/Temperature Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Cable
• 6230D115 AC Adapter
• Electrode Holder Arm

• Larger LCD display
• Buffers recognition
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficient
• Auto lock
• Touch keys with audio feedback
• Power down memory
• Battery/ac adaptor
• Low power consumption
• Battery low indicator
• Percentage of power supply display

6010M Handheld pH/ORP Meter with Memories by Jenco

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6311 Single Parameter pH or ORP Analyzer by Jenco

pH & ORP analyzer,1/4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID's. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved.

• Ph/ORP/temp. measurement & control
• Display pH electrode efficiency
• User selectable ATC element: 3k balco, 10k, and pt-1000
• Reversible & isolated 4~20ma output
• RS-485 output
• Bumpless calibration
• Graphic LCD dispaly,128 x 64with backlight
• Membrane switch with audio feedback
• Auto temp. compensation
• High 50/60 hz noise rejection
• Pipe/wall/panel mounting
• 1/4 DIN watertight enclosure
• One programmable relay for temp.
• CE approved
• Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output

3671N 1/8 DIN Panel Mount pH/ORP Controller by Jenco

1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power115/230A AC.

• All solid state design
• Low cost
• Easy to install
• Set points on front panel
• Recorder output
• 0.56 high efficiency red led display
• 1/8 DIN aluminum case
• Set points cover entire span
• ATC for pH 0 to 100 °C
• Internal pH/ORP select switch
• Low power consumption design, reduced internal heating thus increased reliability